NO.012 ILLEGAL REPEAT COMMAND RESET 不合法子程序呼叫 NO.013 ILLEGAL REPEAT COMMAND RESET 不合法重复指令 NO.014 NO SUCH SUBPROGRAM RESET 未登录子程序 NO.015 ILLEGAL SUBPROGRAM NEST RESET 多重子程序呼叫 NO.016 ILLEGAL DOUBLE ADDRESS RESET 不合法重复地址 NO.017 NOT FOUND SEQUENCE NO RESET 未发现顺序控制编号 NO.018 ILLEGAL S&R CALL RESET 不合法Step&Repeat指令呼出 NO.019 INVALID MACHINE HOME RESET 原点复归未实施 NO.020 ILLEGAL RETURN CODE RESET 不合法程序结束码 NO.021 ILLEGAL S&R RESET 不合法Step&Repeat指令开始
NO.022 ILLEGAL S&R END CODE RESET 不合法Step&Repeat指令结束 NO.023 ILLEGAL PART PROGRAM RESET 不合法纸带格式（FORMAT） NO.024 FD FULL RESET 磁盘容量已满
HITACHI日立(H-MARK-30R)钻孔机操作手册
NO.027 ILLEGAL S COMMAND RESET 回转速设定超出范围外 NO.028 ILLEGAL T COMMAND RESET 工具径设定超出范围外 NO.030 FD FILE PROTECTED RESET 禁止File读出 NO.031 FILE WRITE PROTECTED RESET 禁止File写入 NO.032 NO SUCH FILE RESET File未登录
NO.033 ILLEGAL FILE NAME RESET 文件名程不正确 NO.034 LIMIT OF SUBPROGRAM RESET 子程序超出限制
NO.035 ILLEGAL S&R NEST RESET 多重Step&Repeat呼出
NO.036 ILLEGAL + CODE RESET 不合法“+”码
NO.037 CONSTANT OUT OF RANGE RESET 常数超出被定范围 NO.038 ILLEGAL PARAMETER DATA RESET 不合法参数数据 NO.039 ILLEGAL COMMAND CONDITION RESET 不合法命令组合 NO.040 FORMAT ERROR RESET 格式错误（FORMAT） NO.041 DEVICE BUSY RESET 装置使用中（忙碌） NO.042 ILLEGAL MESSAGE FILE EMG 不合法的讯息档案 NO.043 ILLEGAL MACRO FILE EMG 不合法的宏文件
NO.044 ILLEGAL SUBPROGRAM START RESET 不合法的辅助程序开始 NO.060 END OF PRPGRAM START 作业完了 NO.061 PROGRAM STOP START 程序停止 NO.062 OPTIONAL STOP START 选择性停止 NO.064 TOP OF PROGRAM START 程序开始 NO.067 READY FOR RESTART START 程序准备完毕
NO.068 ILLEGAL HEADER COMMAND START 不合法的程序头指令 NO.072 ILLEGAL DEVICE RESET 未定义装置 NO.079 WAITING FOR START START 等待开始状态 NO.080 EMULATER ERROR EMG 内部演算错误 NO.100 DISK HARDWARE ERROR EMG 磁盘硬件错误
NO.104 CMOS RAM SUM CHECK ERROR EMG CMOS RAM 检查错误 NO.110 DISK HARDWARE ERROR EMG 服务器尚未就绪 NO.111 EXTERNAL IN/OUTPUT START 外部装置警报 NO.113 SERVO OPTICAL FIBER EMG 伺服光纤关系警报
HITACHI日立(H-MARK-30R)钻孔机操作手册
NO.117 DWQENCER HARDWARE DGN.14 EMG 顺序控制硬件错误DGN.14 NO.119 RS-232C 1 ERROR DGN.16 START RS-232C通信埠 1 错误DGN.16 NO.120 RS-232C 2 ERROR DGN.16 START RS-232C通信埠 2 错误DGN.16 NO.122 MAIN CPU ERROR DGN.000 EMG 主CPU硬件错误DGN.000 NO.123 SERVO CPU ERROR DGN.12,413 EMG 伺服CPU硬件错误DGN.12,413 NO.126 BPRKEN BATTERY EMG 电池异常
NO.127 DNC COMMUNICATION ALARM RESET DNC通信警报 NO.199 INTERNAL ERROR EMG 内部错误
NO.200 ILLEGAL CANNED CYCLE RESET 不当程序指令（DIL IC） NO.201 ILLEGAL CANNED TEXT RESET 不当程序令令（文字） NO.202 ILLEGAL CANNED CIRCLE RESE 不当程序指令（扩大孔） NO.203 ILLEGAL CANNED SLOT RESET 不当程序指令（槽孔） NO.205 ILLEGAL DRILL HIT COMMAND RESET 不当加工指令 NO.206 ILLEGAL DRILL CYCLE DATA RESET 不当加工循环数据 NO.207 READY FOR REVERSE START 加工反转就绪 NO.208 END OF MACHINE REVERSE START 加工反转结束 NO.209 HOLE NOT EQUAL START 孔数不一致
NO.210 ILLEGAL TOOL PATH COMMAND RESET 不当切削加工指令 NO.213 ILLEGAL TOOL BIT SELECTION RESET 不当工具别选择 NO.215 NC BUFFER OVER NC RESET NC 缓冲区超出
NO.216 PRESS THEN RESET THE EMG STOP RESET 请实施RESET EMG键以加载系统 NO.250 LIMIT OF TOOL BIT LIFE START 工具寿命终了 NO.251 UNDEFINE T CODE START 未定义T CODE
NO.252 CHANGE OF ATC TOOL BLOCK START 请交换ATC部工具 NO.254 ILLEGAL NUMBER OF TOOL RESET 不当工具数分配(TOOLMNG) NO.255 ILLEGAL SPINDLE SELECTION RESET 不当SPINDLE选择（BH机能） NO.256 CCD SENSOR ALARM RESET CCD传感器警报
NO.257 NO DETECTION OF BIT HIGHT START CCD传感器工具长度侦测不到 NO.258 TOOL DIAMETER ERR(DGN.181) START CCD传感器工具直径侦测异常 NO.260 CHECK STATION NG1(LONG) START 装着后确认工具长度（长） NO.261 CHECK STATION NG2(LONG) START 排出前确认工具长度（长） NO.262 TOOL LET OUT ERROR
START工具排出错误
NO.263 CHECK STATION NG1(SHORT) START 装着后确认工具长度（短） NO.264 CHECK STATION NG2(SHORT) START 排出前确认工具长度（短）
HITACHI日立(H-MARK-30R)钻孔机操作手册
NO.267 TOOL LET OUT ERROR START 工具释放错误
NO.268 PANEL HEIGHT SENSOR ERROR RESET 自动R点设定机能感测异常检出 NO.269 AUTO UPLIM DATA ERROR #129 START 自动R点设定机能参数异常DGN.129 NO.270 Z AXIS ORIGIN ERROR RESET Z轴原点复归错误 NO.271 X,Y AXIS ORIGIN ERROR RESET X,Y轴原点复归错误 NO.275 WORK ZERO ALARM RESET 工作原点错误
NO.276 BOARD EXCHANGE POS. ERROR RESET 基板交换位置错误 NO.277 SUPPLY WORK NOT EQUAL RESET 供给基板板数不一致 NO.278 NO PANEL ON TABLE RESET 自动R点设定机能基板未发现 NO.280 ATC LOCK