ansys热分析学习的好材料并有经典教程
ri2,OK；
(4)Main Menu>Solution>-Loads->Apply>-Thermal->Convection>On Nodes,选择Pick All,
在Film coefficient框中输入-2,在Bulk temperature框中输入100,OK;
(5)Utility Menu>Select>Everything；
(6)Utility Menu>PlotCtrls>Symbols,在Show pres and convect as菜单中选择Arrow, OK; (7)Utility Menu>Plot>Nodes；
18、恢复工作平面及坐标系统
(1)Utility Menu>WorkPlane>Change Active CS to>Global Cartesian；
(2)Utility Menu>WorkPlane>Align WP with>Global Cartesian； 19、设定载荷步选项:
Main Menu>Solution>-Load Step Options->Time/Frequenc>Time and Substeps,在Number of
substeps框中输入50,设置Automatic time stepping为On；
20、求解:Main Menu>Solution>-Solve->Current LS
21、显示温度分布彩色云图: Main Menu>General Postproc>Plot Results>-Contour
Plot->Nodal Solu,选择Temperature TEMP。
《ANSYS Verification Manual》中关于稳态热分析的实例：
VM58 VM92 VM93 VM94 VM95 VM96 VM97 VM98 VM99
Centerline temperature of a heat generating wire Insulted wall temperature
Temperature dependent conductivity Heat generating plate
Heat transfer from a cooling spine
Temperature distribution in a short solid cylinder Temperature distribution along a straight fin Temperature distribution along a tapered fin Temperature distribution in a trapezoidal fin
VM100 VM101 VM102 VM103 VM105 VM108 VM118 VM160 VM161 VM162 VM193
Heat conductivity across a chimney section Temperature distribution in a short solid cylinder Cylinder with temperature dependent conductivity Thin plate with a central heat source
Heat generation coil with temperature dependent conductivity Temperature gradient across a solid cylinder Centerline temperature of a heat generating wire Solid cylinder with harmonic temperature load Heat flow from a insulated pipe
Cooling of a circular fin of rectangular profile
Adaptive analysis of two-dimensional heat transfer with convection