瑞典加工尺寸公差标准
SS-ISO 2768-1
Table 1. Linear measures (Values in mm)
Tolerance class
Permissible deviations for basic size rangeover
0,5
3up toup to36± 0,05± 0,05± 0,1± 0,1± 0,2± 0,3-± 0,5
1)
Designation
fmcv
Descriptionfinemediumcoarsevery coarse
over6up to30± 0,1± 0,2± 0,5± 1over30up to120± 0,15± 0,3± 0,8± 1,5over120up to400± 0,2± 0,5± 1,2± 2,5over400up to1 000± 0,3± 0,8± 2± 4over1 000up to2 000± 0,5± 1,2± 3± 6over2 000up to4 000-± 2± 4± 8
1) For nominal sizes below 0,5 mm, the deviations shall be indicated adjacent to the relevantnominal sizes
Table 2. Broken edges (Values in mm)
Tolerance class
Permissible deviations for basic size range
over3up to6± 0,5± 1
over6up to30± 1± 2
Designation
fmcv
Descriptionfinemediumcoarsevery coarse
0,5up to3± 0,2± 0,4
1)
1) For nominal sizes below 0,5 mm, the deviations shall be indicated adjacent tothe relevant nominal sizes
National Gummi ABwww.gummi.se