只要不是硬盘盘体本身损坏,仅仅是一般性的接插件的接触不良或外电路故障则多数能够迅速排除。
onnect TX and RX ports with RS232 to TLL adapter, you'll need something like jumpers in order to do that, or soldering directly to the PCB board. Connect GND and +5V to PC power supply, or similar. Keep in mind those are direct from Seagate sides, so you'll need to connect in this way:
- From PC (TX) to >>> RX (on Seagate) 使用交叉连接 - From PC (RX) to >>> TX (on Seagate)
You can use RED wire (+5V) from PC power supply. Blacks are GNDs (yellow is +12V so don't use it).”
图表 10 用东西将RX与TX分开