ISO/IEC 17025 认可证书 CNAS-PD19/06-A/1 Name of Products， Type of materials Items, Parameter, Types of tests № Name Code of field № Name，Code of Specification, Standard or method used Restriction or Note limitation 1 Hexavalent chromium Cr(VI) 0222.01 2 8 Leather gloves/ Leather/ Fur Formaldehyde 0222.01 EN 420:1994 EN 420:1994 Accredited General requirement for gloves only for SN 0704-1997 Chapter 6.1: Method for the determination of Cr(VI) chromium (VI) in leather gloves determination for export ---Spectrophotometry by spectra – DIN 53314:1996 photo Testing of leather - Determination meter, of content of chromium(VI) in (measurement leather Hexavalent chromium in made after Leather the reaction ISO 17075：2007； with 1,5 BS EN ISO 17075:2007 Diphenyl - carbazide) Leather -- Chemical determination of formaldehyde content -- Part 2: Method using colorimetric analysis ISO 17226-2-2008 Leather and fur-Chemical tests-Determination of formaldehyde content GB/T 19941-2005 Leather - Chemical tests - Determination of pentachlorophenol content DIN EN ISO 17070-2007 BS EN ISO 17070-2006 EN ISO 17070-2006 ISO 17070-2006 Leather and fur-Chemical tests-Determination of banned azo colourants GB/T 19942-2005 3 pentachlorophenol (PCP) 0222.01 4 AZO dyes 0222.01 Leather -- Chemical tests -- Determination of certain azo colourants in dyed leathers ISO 17234-2003 CEN ISO/TS 17234-2003 ISO/TS 17234-2003 No. CNAS L3068 第 46 页 共 57 页
ISO/IEC 17025 认可证书 CNAS-PD19/06-A/1 Name of Products， Type of materials Items, Parameter, Types of tests № Name Code of field 0222.01 № Name，Code of Specification, Standard or method used Leather -- Chemical tests -- Determination of pH ISO 4045-2008 BS EN ISO 4045-2008 EN ISO 4045-2008 Leather -- Chemical tests -- Determination of matter soluble in dichloromethane and free fatty acid content ISO 4048-2008 DIN EN ISO 4048-2008 EN ISO 4048-2008 BS EN ISO 4048-2008 Determination of semi-volatile organic compounds by GC-MS US EPA 8270D-2007 Ultrasonic Extraction US EPA 3550C-2007 General requirements to Student articles GB 21027-2007 4.3.1 Appendix A General requirements to Student articles GB 21027-2007 clause 4.1 National safety technical code for toys GB6675-2003 clause 4.2, Appendix B lead in paint-atomic absorption spectrophotometric method AOAC 974.02 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis ASTM E1645-2001 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques ASTM E1613-2004 Restriction or Note limitation 5 pH Value 8 Leather gloves/ Leather/ Fur 6 matter soluble 0222.in 01 dichloromethane 7 Dimethyl fumarate 0222.01 1 formaldehyde 0244.01 9 Stationery 2 lead、cadmium chromium、mercury、0244.arsenic、01 antimony、barium、selenium 10 Paint 1 Lead 0244.01 Accredited only for ICP-AES Methods No. CNAS L3068 第 47 页 共 57 页
ISO/IEC 17025 认可证书 CNAS-PD19/06-A/1 Name of Products， Type of materials Items, Parameter, Types of tests № Name Code of field № Name，Code of Specification, Standard or method used Environmental testing - Test methods - Tests - Test Ka - Salt mist BS EN 60068-2-11:1999 Basic environmental testing procedures. Part 2 : Tests. Test Ka: Salt mist IEC 60068-2-11:1981 Environmental testing -- Part 2: Tests - Test Ka: Salt mist EN 60068-2-11-1999 Environmental testing - Part 2: Tests; test Ka: Salt mist DIN EN 60068-2-11:2000 Standard Practice for Operating Salt Spray (Fog) Apparatus ASTM B 117-2007 Connectors for electronic equipment - Tests and measurements -- Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist IEC 60512-11-6-2002 Connectors for electronic equipment -Tests and measurements -- Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist EN 60512-11-6-2002 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Climatic tests - Corrosion, salt mist BS EN 60512-11-6-2002 environmental testing for electric and electronic products-part 2:test methods-Test Ka: Salt mist GB/T 2423.17-2008 Restriction or Note limitation equipment volume : 900mm×600mm×500mm 11 Light industrial product 1 Salt spray test 0328 equipment volume :900mm×600mm×500mm No. CNAS L3068 第 48 页 共 57 页
ISO/IEC 17025 认可证书 CNAS-PD19/06-A/1 Name of Products， Type of materials Items, Parameter, Types of tests № Name Code of field № Name，Code of Specification, Standard or method used Basic Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products Neutral salt spraying test(NSS) QB/T3826-1999 Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products Acetic salt spraying test(ASS) QB/T3827-1999 Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products Copper accelerated salt spraying test(CASS) QB/T3828-1999 Paints and varnishes—Determination of resistance to neutral salt spray(fog) GB/T 1771-2007 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) ASTM B 368-1997 Corrosion tests in artificial atmospheres -- Salt spray tests ISO 9227-2006 Methods of sulphide tarnish resistance test for silver coating QJ 484：1990 Restriction or Note limitation 1 11 Light industrial product Salt spray test 0328 equipment volume :900mm×600mm×500mm 2 sulphide tarnish test 0328 12 Materials and articles in contact with foodstuffs 1 pentachlorophenol Methods of analysis of wood preservatives and treated timber – part 6 Quantitative analysis of Accredited preservative solutions and treated only for timber containing treated timber 0226 pentachlorophenol, containing pentachlorophenyl laurate, pentachlorop-hexachlorocyclohexane and henol dieldrin BS 5666-6-1983 No. CNAS L3068 第 49 页 共 57 页
ISO/IEC 17025 认可证书 CNAS-PD19/06-A/1 Name of Products， Type of materials Items, Parameter, Types of tests № Name Code of field № Name，Code of Specification, Standard or method used Restriction or Note limitation 2 evaporated residue Method for analysis of hygienic standard of products of 0226 polyethylene, polystyrene and polypropyrene for food packaging GB/T5009.60-2003 12 Materials and articles in contact with foodstuffs 3 Determination of potassium permanganate wastage 4 Heavy metal ( Lead ) Accredited only for NO.5 evaporated residue Accredited Method for analysis of hygienic only for standard of products of NO.4 0226 polyethylene, polystyrene and potassium polypropyrene for food packaging permanganate GB/T5009.60-2003 wastage Method for analysis of hygienic Accredited standard of products of only for 0226 polyethylene, polystyrene and NO.6 Heavy polypropyrene for food packaging metal GB/T5009.60-2003 ( Lead ) BS EN 1186-1: 2002 Materials and articles in contact with foodstuffs-Plastics-Part 1: Guide to the selection of conditions and test methods for overall And food-contact materials and articles plastic Part 2: Total immersion method to transfer all of the olive oil in the test method EN 1186-2-2002 13 materials and articles in contact with food- Plastic 1 Overall Migration 0244.01 S EN 1186-3: 2002 Materials and articles in contact with foodstuffs-Plastics-Part 3 Test methods for overall migration into aqueous food simulants by total immersion BE EN 1186-9: 2002 Materials and articles in contact with foodstuffs-Plastics-Part 9 Test methods for overall migration into aqueous food simulants by article filling No. CNAS L3068 第 50 页 共 57 页