ADS-B接收机Radarcape 北京通航电科科技有限公司
ADSBSCOPE
双击打开adsbscope，注意看下划线后面的数字。256表示最多显示256架飞机，16384表示最多显示16384架飞机。这两个任选一个打开。
找到other下拉菜单，network选项，点击networking setting
16
ADS-B接收机Radarcape 北京通航电科科技有限公司
重要，在raw data client输入radarcape的IP和端口号，端口号输入10002即可。
Close，然后找到
other
下拉菜单，network
选项，勾选
，成功。
17
ADS-B接收机Radarcape 北京通航电科科技有限公司
对于中国用户，设置一个离自己近的机场，在navigation下 goto town or airport，如下图
成功
18
ADS-B接收机Radarcape 北京通航电科科技有限公司
点击load maps,background picture，加载背景地图，注意：地图是google地图，所以中国需要设置VPN翻墙，不然看不到下面的效果。
6. 数据输出格式
Radarcape支持二次开发，数据说明如下：
19
ADS-B接收机Radarcape 北京通航电科科技有限公司
? TCP port 10002: This is a CRC-checked mirror of the data as it comes from the FPGA, DF-11, DF-17 and DF-18. Includes Mode-A/C data with respect to the configuration setting.
? TCP port 10003: Binary formatted raw data with all Modes-S data formats
CRC-prechecked (eliminates transmission of the erroneous frames, reduces load on the network). All data from the FPGA is disassembled into messages and verified if correct.
? TCP port 10004: Binary formatted raw data, pre-checked DF-11, DF-17 and DF-18 only: minimum load for the transmission path but contains most information. No Mode-A/C data.
? TCP port 10005: Binary formatted raw data, only raw data frames of those aircraft where the location (latitude and longitude) is unknown. Used for special MLAT purposes. No Mode-A/C data.
Radarcape的数据格式是：
There are only three frame formats in the binary protocol, in order to keep some control characters, the Mode-S Beast uses a so called escaped binary format:
When binary format is selected, DIP#5 (MLAT timer) is ignored. For compatibilty with AVR and later plannings, use \position for the AVR format.
20