This item references content from the following areas: Introduction to Networks
?
11.3.3 Show 命令
Fill in the blank. VoIP22
defines the protocols and technologies that implement the transmission of voice data over an IP network.
This item references content from the following areas: Introduction to Networks
?
11.1.2 小型网络中的协议
Fill in the blank. Do not use abbreviations. The show command provides information about the amount of free nvram and flash memory with the permissions for reading or writing data.
The show file systems command lists all of the available file systems on a Cisco router. It provides useful information such as the amount of available and free memory of flash and nvram, and its access permissions that include read only (ro), write only (wo), and read and write (rw).
23
file systemsThis item references content from the following areas: Introduction to Networks
?
11.4.1 路由器和交换机文件系统
24
Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.
How long will a user be blocked if the user exceeds the maximum allowed number of unsuccessful login attempts?
Correct Response
Your
Response
1 minute 2 minutes 3 minutes
4 minutes
The timeout duration for login attempts is set by the login block-for 180 attempts 4 within 60 command. This command sets the login block at 180 seconds (3 minutes) after 4 incorrect attempts within a 60 second time period. This command can be viewed in the running configuration file.
This item references content from the following areas: Introduction to Networks
?
11.2.4 保护设备