aruba交换机配置-实战篇(3)

member: Copy to a stack member system: System Partition

(aruba2500-xmu-2f) #copy ftp: 172.1.1.1.1 endwin ArubaOS_MAS_7.2.2.1_38712 system: partition 0 ?

(aruba2500-xmu-2f) #copy ftp: 172.1.1.1.1 endwin ArubaOS_MAS_7.2.2.1_38712 system: partition 0 ?

(aruba2500-xmu-2f) #dir

-rw-r--r-- 1 root root 35729264 ArubaOS_MAS_7.2.2.1_38712.1_38712

-rw-r--r-- 1 root root 4905 Jul 4 11:55 default.cfg -rw-r--r-- 1 root root 40 Jul 4 11:46 stack_db.db drwx------ 2 root root 4096 Jul 4 11:00 tpm

(aruba2500-xmu-2f) #copy running-config ?

flash: Copy to the flash file system ftp: Ftp file system

startup-config Copy to Startup configuration tftp: TFTP file system

(aruba2500-xmu-2f) #configure ter

Enter Configuration commands, one per line. End with CNTL/Z

(aruba2500-xmu-2f) (config) #interface vlan 1

(aruba2500-xmu-2f) (vlan \(aruba2500-xmu-2f) (vlan \

(aruba2500-xmu-2f) (config) #interface gigabitethernet 0/0/23 (aruba2500-xmu-2f) (gigabitethernet \ Profile name

(aruba2500-xmu-2f) (gigabitethernet \ (aruba2500-xmu-2f) (config) #interface-profile switching-profile ftp (aruba2500-xmu-2f) (switching profile \ vlan 1

% Invalid input detected at '^' marker.

(aruba2500-xmu-2f) (switching profile \ 1 (aruba2500-xmu-2f) (switching profile \

(aruba2500-xmu-2f) (config) #interface gigabitethernet 0/0/23

Jul 4 ^ 09:36 (aruba2500-xmu-2f) (gigabitethernet \ ftp (aruba2500-xmu-2f) (gigabitethernet \(aruba2500-xmu-2f) #ping 192.168.100.100 Press 'q' to abort.

Sending 5, 100-byte ICMP Echos to 192.168.100.100, timeout is 2 seconds: !!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1.641/4.102/13.924 ms

(aruba2500-xmu-2f) #copy running-config ?

flash: Copy to the flash file system ftp: Ftp file system

startup-config Copy to Startup configuration tftp: TFTP file system

(aruba2500-xmu-2f) #copy running-config ftp: ?

Enter the ftp server ip address

(aruba2500-xmu-2f) #copy running-config ftp: 192.168.100.100 ? Enter the ftp user name

(aruba2500-xmu-2f) #copy running-config ftp: 192.168.100.100 endwin ? Enter the ftp user password

(aruba2500-xmu-2f) #copy running-config ftp: 192.168.100.100 endwin endwin ? Enter the file name

(aruba2500-xmu-2f) #copy running-config ftp: 192.168.100.100 endwin endwin s2500.cfg (aruba2500-xmu-2f) # (aruba2500-xmu-2f) #

(aruba2500-xmu-2f) #copy running-config ftp: 192.168.100.100 endwin endwin s25001.txt (aruba2500-xmu-2f) #