H3C S3600 交换机WEB管理的实现
1、用console连接到交换机。 2、配置VLAN1的IP [H3c]system-view
[H3c]interface-Vlan-interface 1
[H3c interface-Vlan-interface 1]undo ip address
[H3c interface-Vlan-interface 1]ip addree 1.1.1.254 255.255.255.0 quit
3、配置登陆管理的用户名、认证级别、口令 [H3c]local-user \
[H3c]service-type telnet level \[H3c]password simple \
[H3c]ip route-static “0.0.0.0 0.0.0.0 1.1.1.1”(加个静态路由,可不设置) [H3c]save“”部分根据自己的需要设置 ------------------------------ H3C S3600 打开Web管理
配置管理Vlan
interface vlan-interface 1 undo ip address
ip address 192.168.100.1 24
配置用户认证
local-user admin
service-type telnet level 3 password simple admin
配置静态路由
ip route-static 0.0.0.0 255.255.255.255 192.168.100.254
设置完成后,可以从 http://192.168.100.1 登录交换机进行管理,用户名密码均为Admin
------超级终端设置----
串口波率9600,8,N,1 无 仿真VT100
-------------------------配置实例-------------------------- Starting......
*********************************************************** * * * H3C S3600-28TP-SI BOOTROM, Version 604 *
* * ***********************************************************
Copyright(c) 2004-2010 Hangzhou H3C Technologies Co., Ltd. Creation date : Mar 9 2010, 19:16:10 CPU Clock Speed : 200MHz BUS Clock Speed : 33MHz Memory Size : 64MB
Mac Address : xxxxxxxxxxxx(本人隐藏)
Press Ctrl-B to enter Boot Menu... 0 Auto-booting...
Decompress Image................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ .........................................OK! Starting at 0x80100000...
User interface aux0 is available.
Press ENTER to get started.
-------------------------加粗字体为手动输入命令--------------------
System View: return to User View with Ctrl+Z. [H3C]interface vlan-interface 1 [H3C-Vlan-interface1]
%Oct 23 11:19:45:153 2012 H3C L2INF/5/VLANIF LINK STATUS CHANGE:- 1 - Vlan-interface1 is UP
[H3C-Vlan-interface1]undo ip address
[H3C-Vlan-interface1]ip address 192.168.100.254 24 [H3C-Vlan-interface1]
%Oct 23 11:20:52:795 2012 H3C IFNET/5/UPDOWN:- 1 -Line protocol on the interface Vlan-interface1 is UP
[H3C-Vlan-interface1]quit [H3C]local-user admin New local user added.
[H3C-luser-admin]service-type telnet level 3 [H3C-luser-admin]password simple admin [H3C-luser-admin]quit [H3C]save
The configuration will be written to the device. Are you sure?[Y/N]y
Please input the file name(*.cfg)(To leave the existing filename unchanged press the enter key):
Now saving current configuration to the device. Saving configuration. Please wait... ....
Unit1 save configuration flash:/config.cfg successfully
%Oct 23 11:44:43:804 2012 H3C CFM/3/CFM_LOG:- 1 -Unit1 saved configuration succe ssfully. [H3C]