5082-5708-HI000中文资料(2)

2021-09-24 18:03

4. Derate above 53°C at 0.45 mA/°C.

5. See Figure 8 to establish pulsed conditions.

HER/Orange HDSP-5500AlGaAs Red HDSP-H40x Yellow Green HDSP-H150HDSP-K40x HDSP-5700HDSP-5600 Description Series

Series

Series

Series

Units Average Power per Segment or DP 9610580105mW Peak Forward Current per 160[1]90[3]60[5]90[7]mA Segment or DP

DC Forward Current per Segment or DP 40[2]30[4]

20[6]3018]

mA Operating Temperature Range -20 to +100[9]

-40 to +100

°C Storage Temperature Range -55 to +100

°C Reverse Voltage per Segment or DP 3.0V Lead Solder Temperature for 3 Seconds 260

°C

(1.60 mm [0.063 in.] below seating plane)Absolute Maximum Ratings

6. Derate above 81°C at 0.52 mA/°C.

7. See Figure 9 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.

9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.

元器件交易网

元器件交易网

5

Electrical/Optical Characteristics at T A = 25°C

AlGaAs Red

Device

Series

HDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V9.116.0mcd I F = 20 mA

(Digit Average)

1.8I F = 20 mA

Forward Voltage/Segment or DP V F V

2.0

3.0I F = 100 mA

H15X

Peak WavelengthλPEAK645nm

Dominant Wavelength[3]λd637nm

Reverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µA

Temperature Coefficient of?V F/°C-2mV/°C

V F/Segment or DP

Thermal Resistance LED Junction-RθJ-Pin400°C/W/

to-Pin Seg

High Efficiency Red

Device

Series

HDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions

9002800I F = 10 mA Luminous Intensity/Segment[1,2,6]I Vµcd

(Digit Average)3700I F = 60 mA Peak:

1 of 6 df

Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mA 55XX

Peak WavelengthλPEAK635nm

Dominant Wavelength[3]λd626nm

Reverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µA

Temperature Coefficient of?V F/°C-2mV/°C

V F/Segment or DP

Thermal Resistance LED Junction-RθJ-Pin345°C/W/

to-Pin Seg

元器件交易网

6

Yellow

Device

Series

HDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions

6001800I F = 10 mA Luminous Intensity/Segment[1,2]I Vµcd

(Digit Average)2750I F = 60 mA Peak:

1 of 6 df

Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mA 57XX

Peak WavelengthλPEAK583nm

Dominant Wavelength[3,7]λd581.5586592.5nm

Reverse Voltage/Segment or DP[4]V R 3.040V I R = 100 µA

Temperature Coefficient of?V F/°C-2mV/°C

V F/Segment or DP

Thermal Resistance LED Junction-RθJ-Pin345°C/W/

to-Pin Seg

Orange

Device

Series

HDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 2.37mcd I F = 10 mA

(Segment Average)[1,2]

Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mA

Peak WavelengthλPEAK600nm

H40x Dominant Wavelength[3]λd603nm I F = 10 mA

K40x Reverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µA Temperature Coefficient of?V F/°C-2mV/°C

V F/Segment or DP

Thermal Resistance LED Junction-RθJ-Pin345°C/W/

to-Pin Seg

7

Device Series

HDSP-

Parameter

Symbol Min.Typ.Max.

Units

Test Conditions 900

2500

I F = 10 mA

Luminous Intensity/Segment [1,2]I V

µcd

(Digit Average)`

3100

I F = 60 mA Peak:1 of 6 df Forward Voltage/Segment or DP

V F 2.1 2.5

V I F = 10 mA

56XX

Peak Wavelength λPEAK 566nm Dominant Wavelength [3,7]

λd 571577nm Reverse Voltage/Segment or DP [4]V R 3.0

50V I R = 100 µA

Temperature Coefficient of ?V F /°C -2mV/°C V F /Segment or DP

Thermal Resistance LED Junction-R θJ-Pin

345

°C/W/to-Pin

Seg

High Performance Green

Notes:

1. Device case temperature is 25°C prior to the intensity measurement.

2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.

3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.

4. Typical specification for reference only. Do not exceed absolute maximum ratings.

5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-H15X series.

6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the HDSP-550X series.

5082-5708-HI000中文资料(2).doc 将本文的Word文档下载到电脑 下载失败或者文档不完整,请联系客服人员解决!

下一篇:Essential Macleod光学薄膜软件简要使用说明

相关阅读
本类排行
× 注册会员免费下载(下载后可以自由复制和排版)

马上注册会员

注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: