元器件交易网
CRYSTAL OSCILLATORS
Data Sheet 0645A
AB-X29NXXX Series PECL/LVPECL UHF XO
Description
The AB-X29NXXX Series of crystal oscillators (XO) provides ultra high frequency with PECL/LVPECL complementary outputs. The outputs can be disabled for test automation or combining multiple clocks. The device is based on low noise analog harmonic frequency
multiplication, providing exceptionally low Phase Noise and Jitter. It’s packaged in a miniature, FR-4 based 9x14 mm SMD package
Applications and Features
Fiber Channel; 10 GbE; Infiniband; Network Processors; SONET/SDH
High Reliability – NEL HALT/HASS qualified for crystal oscillator start-up conditions Extremely Low Phase Noise and Jitter Frequency Range to 1,000 MHz
RoHS compliant, Lead Free Construction SONET ± 20 ppm overall stability available High Shock Resistance, to 1.000 G
Creating a Part Number
元器件交易网
CRYSTAL OSCILLATORS
Data Sheet 0645A
Environmental and Mechanical Characteristics
Operating temp. range
Mechanical Shock Thermal Shock Vibration Hermetic Seal Soldering conditions
see part # table
Per MIL-STD-202, Method 213, Cond. A Per MIL-STD-883, Method 1011, Cond. A Per MIL-STD-883, Method 2007, Cond. A
Leak rate less than 1x10 /s of helium , crystal only. See MAX reflow profile below
MAX Reflow Profile
元器件交易网
CRYSTAL OSCILLATORS
Data Sheet 0645A
AB-X29NXXX Series
Absolute Maximum Ratings
Electrical Parameters
Conditions, Nominal Frequency Supply Voltage Output Levels Duty Cycle (Symmetry) Jitter
Fo Vcc Voh Vol
Code 0 Code A 200 4.75 3.135 1,000 MHz 5.0 5.25 V 3.3 3.465 LVPECL
Thevenin Equivalent
Vcc-1.620
At 50% of output voltage swing
Noise, 12 KHz to 20 MHz , RMS
100Hz to 80KHz,RMS 1.0 ps 50 KHz to 80 MHz 0.3 ps
Wavecrest Random characterized period,
Accumul., pk-to-pk
APR 50 ppm @100 Hz -90 -85 or less @1 KHz -118 -113
@10KHz -135 -130 @100KHz -140 -135 @>1MHz -145 -140
Sub-harmonics At 622.08 MHz -50 -46
Frequency Stability ΔF/F Overall, including initial calibration, temperature, see table aging 10 years, shock and for part vibration number
V 1.62 V
Disable Pin 2 = High, Vcc-1.025 V Disabled, Pin4 = Logic “1”,
V to Vcc Pin5 = Logic “0”