zone: SFDB04_MSA1500 1,10 1,6 zone: SFDB_EVA4400 1,3 1,4 1,5 1,7 1,8 1,9 zone: SFEVA4400_SMA 1,8 1,9 1,11 zone: SPC_MSA1000 1,0 1,1 1,2 1,7 swd211:admin>
8.查看系统日志信息
swd211:admin>supportshow 日志比较多,建议log出来查看.
9.关机
swd211:admin>sysshutdown
10.设置博科Brocade交换机IP地址
博科交换机的默认IP地址是10.77.77.77，在命令行模式下可以通过ipaddrset命令对交换机的IP地址进行设置和修改 swd77:admin>ipaddrset
Ethernet IP Address [10.77.77.77]: #输入交换机需要设置的IP地址 Ethernet Subnetmask [255.255.255.0]: #输入掩码 Fibre Channel IP Address [none]: Fibre Channel Subnetmask [none]:
Gateway IP Address [none]: # 输入网关 DHCP [Off]: #是否开启DHCP swd77:admin>
11.博科brocade交换机查看OS版本信息 swd77:admin>version
Kernel: 2.6.14.2 //linux内核版本 Fabric OS: v6.1.0a // 交换机OS版本
Made on: Thu Apr 17 21:45:31 2008 // 生产日期 Flash: Tue Jan 13 23:33:44 2009 BootProm: 4.6.6 swd77:admin>
12.博科brocade交换机添加license授权信息
swd77:admin>licenseadd XXXXXXXX（博科的激活号）
13.查看博科brocade交换机license授权信息
在命令行模式下使用licenseshow命令可以查看博科交换机的授权情况，使用licenseadd命令可以添加授权。
博科Brocade Slikworm 210E交换机授权情况 swd77:admin> licenseshow RzcQSXXXCS0RTc: Unknown1 license S9zXXXCSzRTScl: Unknown2 license b9QQGGHJHARRdF: Fabric license swd77:admin>
其中两个Unknown1 和Unknown2这两个授权应该是两个4端口的授权。Fabric license是级联license授权，是我后来添加的，默认的210E交换机是没有的。
14.博科Brocade Slikworm 300交换机license swd77:admin>licenseshow
XSCJBCmH3SARFa7BXrVVBGGFFRRXBArGR:
Fabric license //级联License
Enhanced Group Management license //增强组管理授权 8 Gig FC license //8Gb的授权 swd77:admin>
15.博科Brocade交换机修改密码命令
Brocade交换机在命令行模式下可以通过passwd命令来修改用户密码： 以brocade 300为例：
swd77:admin>passwd #使用passwd命令修改当前用户密码 Changing password for admin
Enter old password: #输入目前使用的密码 Enter new password: #输入新密码 Re-type new password: #确认新密码
passwd: all authentication tokens updated successfully Saving password to stable storage.
Password saved to stable storage successfully. swd77:admin>
16.博科 brocade SAN交换机密码重置
博科300的默认用户名是admin，默认密码是password。由于这台机器用户做过设置，密码改过了需要重设一下。博科交换机是没有reset按钮的，必须通过console线连接通过命令重置。
博科300的os是用的linux 2.6的核心，最高权限的管理帐号是root。重置交换机密码就是用这个帐号。 swd77 login: root Password: fibranne
使用该帐号登陆后会出现下面的信息：
Disclaimer for Root and Factory Accounts Usage!
This Fibre Channel switch is equipped with Root and Factory accounts that are intended for diagnostics and debugging purposes solely by the Equipment vendor's trained engineers. Improper use of the
functionality made available through the Root or Factory account could cause significant harm and disruption to the operation of the SAN fabric. Your use of the functionality made available through the Root or Factory account is at your sole risk and you assume all liability resulting from such use. The Equipment vendor shall have no liability for any losses or damages arising from or relating to the use of the Root or Factory account (and the functionality enabled thereby) by anyone other than the Equipment vendor's authorized engineers.
Proceeding with the usage of this switch as the Root or Factory user explicitly indicates your agreement to the terms of this disclaimer. Please change passwords for switch default accounts now. Use Control-C to exit or press 'Enter' key to proceed.
这里用Control-C结束就行了，如果回车会让分别设置各个帐号的密码，出现如下信息： Warning: Access to the Root and Factory accounts may be required for proper support of the switch. Please ensure the Root and Factory passwords are documented in a secure location. Recovery of a lost Root or Factory password will result in fabric downtime. for user - root
Changing password for root Enter new password: Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now. for user - factory
Changing password for factory Enter new password: Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now. for user - admin
Changing password for admin Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now. for user - user
Changing password for user Enter new password: Password unchanged.
passwd: Authentication token manipulation error
17.登陆后是用passwddefault命令恢复出厂密码 swd77:root>passwddefault
Password policies are already set to default.
All account passwords have been successfully set to factory default. swd77:root>
18.交换机升级
将Brocade 200E交换机现有微码版本v5.0.1b 升级至v6.2.1，具体操作步骤如下：
1、 资源准备：网线一根，BROCADE 200E firmware version ，控制台（PC或笔记本），要安装Java JRE 1.5版本以上
2、 设备连接：用网线将控制台（PC 或笔记本）的网卡连接到交换机的管理口上。 3、 控制台环境设置：将控制台的网卡IP地址设备为10.77.77.1，子网掩码为
255.255.255.0。然后在控制台的安装FTP服务或软件，FTP的根目录设置为版本软件所在的目录，并设置一个用户lab，密码为lab123。
确认控制台与交换机（brocade）的网络连接正常。执行以下命令： Ping 10.77.77.77 (默认管理口地址) 4、 登陆交换机：输入telnet 10.77.77.77 ，用户名为：admin，密码为：password，登录到交换机。登陆进入后，会提示更改admin帐户的密码，如需更改直接回车，不更改则按ctrl + c 。
5、 登录后输入firmwareshow，回车，可以查看现有的微码版本，如果不是v6.2.1，则需要升级到v6.2.1。 Concept
1). Every Brocade switch has 2 partitions (one is master, the other is slave). 2). Switch can be upgrade online
3). Slave upgrade first, after the slave partition upgraded, slave partition become master, master become slave, then firmware copy from master to slave Version Information：
Port Speed Product Firmware Version Upgrade info 2GB 3900 4.x or 5.x v5.2.0a or v5.3.0c 2GB 12000 4.x or 5.x v5.2.0a or v5.3.0c 4GB 42000 4.x or 5.x v5.2.0a or v5.3.0c
NOTICE:
1> when current Version is 4.4.2 or later, Please Online Upgrade. 2> Before Upgrade firmware, please backup current configuration. 3> Copy new version firmware packages to ftp server directory.
Upgrade Firmware process (Step by Step)
This is demo switch from Brocade Shanghai office. Don't change IP address please. If you meeproblem
swd77 login: admin Password:
swd77:admin> version Kernel: 2.4.19
Fabric OS: v4.4.0d // Please check current version Made on: Wed May 18 21:08:14 2007 Flash: Mon Jun 6 06:35:26 2007 BootProm: 4.5.0
swd77:admin>configupload //backup the switch configuration Protocol (scp or ftp) [ftp]: ftp
Server Name or IP Address [host]: 202.134.79.36 //ftp server ip-address User Name [user]: lab//ftp server user name File Name [config.txt]: config.txt // specify configuration file name Password: //ftp server user password Upload complete
swd77:admin>firmwaredownload//download new version firmware
You can run firmwareDownloadStatus to get the status of this command. This command will cause the switch to reset and will require that existing telnet, secure telnet or SSH sessions be restarted.
Do you want to continue [Y]: y
Server Name or IP Address: 10.77.77.1//ftp server ip-address
User Name: admin //ftp server user name
File Name: /v5.1.0/v5.1.0/release.plist /v5.2.0/v5.2.0/release.plist /v5.3.0/v5.3.0/release.plist /v6.0.0/v6.0.0/release.plist /v6.1.0/v6.1.0/release.plist /v6.2.1/v6.2.1/release.plist
Password: //ftp server user password