AG产品软件配置指导手册new(4)

SoftUp系列IP语音产品软件配置指导手册

[配置实例] [ON]AG2>

config ethport 1 auto on

============命令开始执行============ Success!

============命令执行结束============

2.5 显示系统相关信息

[命令语法] show system information

[功能描述] 查看AG设备的配置信息(设备类型、网元名、IP、MAC、域名、打包时长、

语音编解码类型、呼叫协议、通讯端口号等信息)。 [命令模式] AG模式 [配置实例] [ON]AG2>

show system information

============命令开始执行============ Device Type :AG NetID :2 Net Name :ag2 Domain Name :44.0.0.1 IP Address :44.0.0.1

Mac Address :00-05-3B-00-00-87 Time of Pack :20ms

Voice Code And Decode Type :G.711 Mu and G.711 A Call Protocol Type :MGCP Communication Port :2427 Success!

============命令执行结束============

2.6 显示上级设备连接状态

[命令语法] show upperdev connect-status

BeiJing Harbour Networks, Ltd. Copyrighted —16

SoftUp系列IP语音产品软件配置指导手册 [功能描述] 查看AG与上级设备的连接状态。 [命令模式] AG模式 [配置实例] [ON]AG2>

show upperdev connect-status

============命令开始执行============

The device connected with upper device status : Connected Success!

============命令执行结束============

2.7 查询POTS的端口状态

[命令语法] show potsport [|all] status [功能描述] 查看AG的pots端口的线路与电话状态信息。 [命令模式] AG模式 [配置实例] [ON]AG2>

show potsport 1 status

============命令开始执行============ Port 线路状态 电话状态 1 阀值溢出.

1 空闲态. Success!

============命令执行结束============

2.8 显示POTS端口的开关状态

[命令语法] show potsport [|all] switch [功能描述] 显示AG POTS端口的开关状态 [命令模式] AG模式 [配置实例] [ON]AG2>

show potsport 1,2 switch

============命令开始执行============

BeiJing Harbour Networks, Ltd. Copyrighted

—17

SoftUp系列IP语音产品软件配置指导手册 Pots port 1 enable Pots port 2 enable Success!

============命令执行结束============

2.9 外部总线测量

[命令语法] external meter port [|all] [功能描述] 外线端口监测 [命令模式] AG模式 [配置实例] [ON]AG2>

external meter port 1

============命令开始执行============ Port 1 Meter Result IT 0.43 mA Tip Voltage 0.26 V Ring Voltage -3.47 V Tip-Ring Loop Resistance 93508.16 ohm Tip Ground Resistance 325176.47 ohm Ring Ground Resistance 342522.60 ohm Tip Ring Loop Capacitance 1.96 uF Tip Ground Capacitance 0.86 uF Ring Ground Capacitance 0.86 uF ------------------------------------ Success!

============命令执行结束============

2.10 内部总线测量

[命令语法] internal meter port [|all] [功能描述] 内线端口监测 [命令模式] AG模式

BeiJing Harbour Networks, Ltd. Copyrighted

—18

SoftUp系列IP语音产品软件配置指导手册 [配置实例] [ON]AG2>

internal meter port 1

============命令开始执行============ POTS port 1 internal meter OK! Success!

============命令执行结束============

2.11 查询网口状态

[命令语法] show ethport status [功能描述] 显示AG业务口的端口信息 [命令模式] AG模式 [配置实例] [ON]AG2> show ethport status

============命令开始执行============ port1:

Link state :DOWN Port state :Enable Autonegotiation :Enabled Speed :10BaseT Duplex :Half Flowcontrol :Disabled port2:

Link state :ON Port state :Enable Autonegotiation :Enabled Speed :100BaseT Duplex :Full

BeiJing Harbour Networks, Ltd. Copyrighted

—19

SoftUp系列IP语音产品软件配置指导手册 Flowcontrol :Disabled port3:

Link state :DOWN Port state :Enable Autonegotiation :Enabled Speed :10BaseT Duplex :Half Flowcontrol :Disabled port4:

Link state :DOWN Port state :Enable Autonegotiation :Enabled Speed :10BaseT Duplex :Half Flowcontrol :Disabled portMII:

Link state :DOWN Port state :Enable Autonegotiation :Enabled Speed :100BaseT Duplex :Full Flowcontrol :Enabled Warning...

============命令执行结束============

BeiJing Harbour Networks, Ltd. Copyrighted

—20