华为GPON数据查看(2)

ID ATTR TYPE TYPE PARA -----------------------------------------------------------------------------

306 1002 QinQ gpon 0/0 /0 9 0 vlan 2 12 12 up 307 91 stacking gpon 0/0 /0 9 1 vlan 91 7 7 up -----------------------------------------------------------------------------

[btv-config] btv

igmp user add service-port 307 no-auth multicast-vlan 90

igmp multicast-vlan member service-port-list 307 #

return

interface gpon 0/0

ont add 7 1 loid-auth \ ont-srvprofile-id 3 desc \ tcont bind-profile 7 1 1 profile-id 1

CLX_nuerxiangyaleguzibagecunjizhang-MA5608T(config)#display service-port port 0/0/7 ont 1

Switch-Oriented Flow List

-----------------------------------------------------------------------------

INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE ID ATTR TYPE TYPE PARA -----------------------------------------------------------------------------

506 1002 QinQ gpon 0/0 /7 1 0 vlan 2 12 12 up 507 91 stacking gpon 0/0 /7 1 1 vlan untag 13 13 up 508 8 common gpon 0/0 /7 1 2 vlan 8 12 12 up ----------------------------------------------------------------------------- Total : 3 (Up/Down : 3/0)

service-port 506 vlan 1002 port 0/0/7 ont 1 multi-service user-vlan 2 tag-transform translate-and-add inner-vlan 1219 inner-priority 0 inbound traffic-table index 12 outbound traffic-table index 12

service-port 507 vlan 91 port 0/0/7 ont 1 eth 2 multi-service user-vlan untagged tag-transform add-double inner-vlan 91 inner-priority 5 inbound traffic-table index 13 outbound traffic-table index 13 btv

igmp user add service-port 507 no-auth multicast-vlan 90

igmp multicast-vlan member service-port-list 507

service-port 508 vlan 8 port 0/0/7 ont 1 multi-service user-vlan 8

tag-transform translate inbound traffic-table index 12 outbound traffic-table index 12

MA5608T(config-if-gpon-0/0)#display ont optical-info 0 all 查看光功率 -----------------------------------------------------------------------------

ONT 接收光 发送光 OLT接收到ONT 温度 电压 电流 编号 功率(dBm) 功率(dBm) 光功率(dBm) (C) (V) (mA) -----------------------------------------------------------------------------

9 -14.14 2.26 -17.43 52 3.240 8 13 -20.55 2.32 -24.09 30 3.180 13 14 -25.85 2.08 -28.24 34 3.280 6 25 -22.07 2.19 -24.95 25 3.260 7 28 -23.10 2.21 -25.53 32 3.280 8 30 -22.84 2.34 -25.69 31 3.260 4 32 -26.38 2.11 -26.99 38 3.280 9 33 -15.86 1.97 -22.08 32 3.200 4 34 -12.61 2.06 -15.76 32 3.220 9 35 -23.56 1.94 -24.82 32 3.200 9 36 -24.20 2.15 -26.20 38 3.260 15 37 -24.20 2.40 -28.24 30 3.240 12 38 -11.77 2.37 -15.52 30 3.260 7 39 -27.44 2.29 -27.22 36 3.280 12 -----------------------------------------------------------------------------

MA5608T(config-if-gpon-0/0)#ont deactivate 4 69 关闭光猫 MA5608T(config-if-gpon-0/0)#ont activate 0 32 打开光猫

MA5680T开局指导书(MA5680T+MXU)

>>User name:root >>User password:admin

MA5680T>enable MA5680T #config

MA5680T (config)# time 2009-06-12 14:45:30 \\\\设置系统时间，根据实际情况设置

MA5680T (config)# switch language-mode \\\\切换语言模式

MA5680T (config)# sysname MA5680T_LY \\\\ 设置系统名称，根据实际情况设置

1. 创建DBA模版（用于onu上行带宽控制）

MA5680T_LY (config)#dba-profile add profile-id 20 profile-name \type2 assure 10240 \\\\创建保证带宽为10M的DBA模版 MA5680T_LY (config)#dba-profile add profile-id 21 profile-name \type3 assure 10240 max 20480 \\\\ 创建保证带宽为10M最大带宽为20M的DBA模版

2. 创建流量模版（用于onu下行带宽控制）

MA5680T_LY(config)#traffic table ip index 20 cir 10240 priority 0 priority-policy local-Setting \\\\创建10M流量模版

MA5680T_LY(config)#traffic table ip index 21 cir 102400 priority 0 priority-policy local-Setting \\\\创建100M流量模版（可根据需要创建其他带宽的流量模版） 3. 创建线路模版

MA5680T_LY(config)#ont-lineprofile epon profile-id 20 { |profile-name }: Command:

ont-lineprofile epon profile-id 20

MA5680T_LY(config-epon-lineprofile-20)#llid dba-profile-id 10 ont-car 10 \\\\引用dba模版和流量模版，若不绑定，默认dba模版为dba-profile_9，流量模版为6，下行不限速

MA5680T_LY(config-epon-lineprofile-20)#commit \\\\提交生效 4. 增加snmp模版（用于给onu下发snmp参数）

MA5680T_LY(config)#snmp-profile add profile-id 10 { profile-name|version }:v1 { readgroup }:public { writegroup }:private { des-ip }:124.128.255.66 { source-port<1,65535> }:162

{ securityname }:n2000

Command:

snmp-profile add profile-id 10 v1 public 20cnc06 60.215.134.2 162 h1

snmp-profile add profile-id 10 v1 public 20cnc06 60.215.134.6 162 h2

5. 增加确认单板

MA5680T_LY (config)# board add 0/1 H801EPBC \\\\ 1槽位增加业务单板EPBC MA5680T_LY (config)#board add 0/19 H801GICF \\\\增加上行板，只有新安装olt才会用到

MA5680T_LY (config)#board add 0/20 H801GICF 6. 创建vlan并在上行口做透传

MA5680T_LY (config)#vlan 100 smart \\\\ 创建网管vlan 100 MA5680T_LY (config)#vlan 3800 smart \\\\创建语音外层vlan MA5680T_LY (config)#vlan 3780 to 3781 smart \\\\ 宽带外层vlan MA5680T_LY (config)#vlan attrib 3780 to 3781 q-in-q \\\\设置宽带外层VLAN QinQ属性

MA5680T_LY (config)#vlan attrib 3800 q-in-q \\\\设置语音外层VLAN QinQ属性

MA5680T_LY (config)#port vlan 164 0/18 0 MA5680T_LY (config)#port vlan 3800 0/19 0

MA5680T_LY (config)#port vlan 3780 to 3781 0/19 0 \\\\上行口透传olt上所有vlan，确定上行口为可能为0/19 0、0/19 1、0/20/ 0 、0/20 1 7. 配置端口，在端口下添加onu

MA5680T_LY (config)# interface epon 0/1

huawei(config-if-epon-0/1)# port 0 ont-auto-find enable \\\\开启0/1/0端口的ONT自动发现功能

huawei(config-if-epon-0/1)# port 0 tag-based-vlan \\\\设置OLT的业务模式, 基于VLAN添加tag模式,EPBC板不需要设置，也不支持该命令 MA5680T_LY(config-if-epon-0/1)#ont add { portid<0,7> }:0

{ mac-auth|ontid<0,127>|password-auth }:0 \\\\分配ontid { mac-auth|password-auth }:mac-auth

{ mac-value

}:0018-0001-0001 { oam|snmp }:snmp

{ ont-lineprofile-id|ont-lineprofile-name }:ont-lineprofile-id { profile-id<1,4096> }:20 \\\\绑定线路模版，根据带宽需要绑定

{ |desc }: desc

{ describe-value }:quanxingxiaoqu

\\添加描述信息可选增加第二台时注意更改ontid号，从0开始依次增加就行 8. 配置MDU带内网管数据

MA5680T(config)#interface epon 0/1 MA5680T(config-if-epon-0/1)#ont ipconfig \\\\通过olt远程下发MDU的带内网管数据 { portid<0,3> }:0

{ ontid<0,63> }:0

{ ip-address }:ip-address

{ ip-address }:10.99.20.11 \\\\给MDU分配的ip地址 { mask }:mask

{ mask }:255.255.255.0 { gateway }:gateway { gateway }:10.99.20.1 \\\\网关 { manage-vlan }:manage-vlan { managevlan<1,4093> }:1000 \\\\网管vlan

SHDNL-3-MA5680T(config-if-epon-0/1)#ont snmp-profile \\\\下发snmp参数 { portid<0,7> }:0

{ all|ontid<0,127> }:0

{ profile-id|profile-name }:profile-id { profile-id<1,64> }:20 9. 创建业务虚端口

huawei(config)# service-port vlan 100 epon 0/1/0 ont 0 multi-service user-vlan 100 \\\\配置网管vlan 100业务虚通道， ontid为0

huawei(config)#service-port vlan 3800 epon 0/1/0 ont 0 multi-service user-vlan 3801 \\\\配置语音vlan的业务虚通道， ontid为0，内层vlan为3801，外层vlan为3800

huawei(config)# service-port 0 vlan 100 epon 0/1/0 ont 1 multi-service user-vlan 100 \\\\配置网管vlan 100业务虚通道， ontid为1

huawei(config)#service-port vlan 3800 epon 0/1/0 ont 0 multi-service user-vlan 3801 \\\\配置语音vlan的业务虚通道， ontid为1，内层vlan为3801，外层vlan为3800

huawei(config)# service-port vlan 3780 epon 0/1/0 ont all multi-service user-vlan 3000 to 3799 \\\\为pon口0/1/0下所有onu宽带vlan创建业务虚通道，打外层标签3780 10. 创建olt管理vlan ip

huawei(config)#interface vlanif100

huawei(config-if-vlanif1000)# description \

huawei(config-if-vlanif2)# ip address 10.99.20.1 255.255.255.0 11. 创建默认路由，指向管理vlan的网关

huawei(config)#ip route-static 0.0.0.0 0.0.0.0 10.99.20.1 保存配置

huawei(config)#sav