Supernova Build Code Guideline(2)

paragraphs for building projects. In MIDE toolbar, you can quickly choose build project for target or build for simulator. Choose to “Build target:” to “simulator”, then, you can build your projects for simulator. In this case, we choose build for simulator. Then, we click “Build” on menu bar, and click “Build and run” option. Then, you can see building process goes on, and build messages are displayed at bottom message area. You can also click “Build” option just to build the projects. By clicking “Run” you can execute your built project executable file. Instead of clicking “Build” in menu bar mentioned above, there is a shortcut button on toolbar, you can quick click this “Build” button on toolbar to build your project. After building procedure started, you can see build log are displaying in the bottom “Logs & others” message box. If any build errors occurred, the error message will be highlighted in red color. Please fix these compile & linking error for Once build successfully, you can see final build messages showing that “Build finished: 0 errors.” There are also two ways to run your built project, by “Run” option in Build menu bar, or by “Run” button on tool bar. Click one of them and you can see your built project running. In this case, we choose build for target. Select “Build target:” to “Board”, then, you can build your projects for target board. Clicking “Build” button on tool bar, you are now starting to build project for target board. After building project for target board, please refer to section 錯誤! 找不到參照來源。找不到參照來源。 to run your project on target board.