LED Software Operation Manual
LED Software Operation Manual
V5.2.0 and above Version
This manual is mainly targeted for LED systems integrators, manufacturers, end customers such as LED editorial management
LED Software Operation Manual
Directory
1 Software Runtime Environment 2 Software use 3 Software Settings 4 Software interface 4.1 Software Overview 4.2 Preview Window 4.3 Attribute area
4.4 The main menu and toolbar 5 Program List 6 Programs type 7 Programs space 8 Preview
9 Program management 10 To send program data 11 Other features
LED Software Operation Manual
1 Software Runtime Environment
?operating system：Windows98/ME/NT/2000/XP/Vista。
2 Software use
The software is a green software, no installation, copying, you can use! Copy “LED software.exe” on the CD-ROM to place the file directory, right-click, create a shortcut on the desktop, you can use! Installation. Do not need to use the LED software, simply delete \software\
3 Software Settings
This step is to set the LED screen parameters.
1>: Click \
Figure 1 To enter \
2>: Click the “Hardware”button, then pop up a dialog figure 2 : input the setting
LED Software Operation Manual
password \168\
Figure 2 : Password windows
Figure 3 Hardware Setup window
4> In Figure 4, \
You can set the parameter blow:
? The screen height, screen width: Set the actual screen pixels. ? Data Pola: the same as display screen setting. ? OE Pola: the same as display screen setting ? Color Type: R : single color
RB: Two color
LED Software Operation Manual
? set scan mode
For indoor LED SCREEN indoor, the scan mode is 1/16 in general For outdoor LED SCREEN and semi-indoor, the scan mode is 1/4 in general 4.1 or 4.3
For car LED SCREEN , the scan mode is 1/8 in general 5> communication settings
Biosled LED control system have a function to search the LED screen autoly.
To click the search button ,it can automatically find the control card, as shown in Figure 6!
Figure 6, find screen
If you have powered the LED screen and link the screen with computer, you will see the
below figure 7 when you open “led software”.
Figure 7, Serach the LED control board
4． Software interface 4.1 Software Overview
Software during normal operation of the interface shown in Figure 8, mainly by the \