4. Select a path to add;
5. Enter in or scan the UID code of QR code of the device.
6. Select or enter in the name and passwords of wifi before setting configuration.
7. Search 8. Confirm 9. Done
3. When it says “Wifi configuration completed”, the device
will restart again. Both the blue and red indicator light will keep on for 30 seconds after the device starts up (It means the device is connected to network when the red indicator light keeps on).
4. App is ready to add and search for camera by now (under the same network environment).
4. Point-to-point connection (without network connection) 1. Search for wifi hotspot for connection on mobile phone-open APP-click
-select
-search-confirm-connection completed (the blue light keeps on
while the red light flashes slowly)
5. Connection method 2 (point-to-point connection to router network) 2. Search for wifi hotspot for connection on mobile phone-open APP-click
-select
-search-confirm-connection
completed-click to set the camera-select advance configuration-select wifi connection-select a wifi-enter in passwords-connect (30 seconds after the camera restarts automatically, both the blue and red indicator light for camera connection will keep on) 6. Lamp opening and talkback. 1. Click
to remotely turn on the illumination lamp, and drag
to adjust the brightness. 2. Click
to remotely turn on the night vision lamp.
, and then press
to talk, and voice will
3. Click the microphone
be automatically sent to the device side after release.
7. Screen shot, video recording and alarm
1. Click the online device to browse videos. There are three options “1080P 720P 480P” on the top of screen, which can be selected according to the current network environment to adjust the image quality and video fluency. In addition to that, the color contrast degree and brightness can also be adjusted autonomously. Icons in
respectively represent: monitor, photograph, video recording, left/right rollover, up/down rollover. By clicking “photograph” or “video recording”, the images or videos will be saved in the phone memory (as shown below).
2. Long press the online device to start more settings.
1. Advanced configuration (to remotely change basic functions of the device)
3. Select
, enter in the original passwords 8888 and then
new passwords to change the passwords.