机电0810班郝兴毕业设计
#include
#define uchar unsigned char #define uint unsigned int sbit lcdrw=P3^3; sbit lcdrs=P3^2; sbit lcde=P3^4; sbit d=P2^7; sbit s1=P2^0; sbit s2=P2^1; sbit s3=P2^2; sbit cs=P3^5; sbit wr=P3^6; uchar s1num,a,ys,j; uint fre;
uchar code tosin[256]={
0x80,0x83,0x86,0x89,0x8d,0x90,0x93,0x96,0x99,0x9c,0x9f,0xa2,
0xa5,0xa8,0xab,0xae,0xb1,0xb4,0xb7,0xba,0xbc,0xbf,0xc2,0xc5,
0xc7,0xca,0xcc,0xcf,0xd1,0xd4,0xd6,0xd8,0xda,0xdd,0xdf,0xe1,
0xe3,0xe5,0xe7,0xe9,0xea,0xec,0xee,0xef,0xf1,0xf2,0xf4,
- 12 -
机电0810班郝兴毕业设计
0xf5,
0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfd,0xfe,0xff,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,
0xfd,0xfc,0xfb,0xfa,0xf9,0xf8,0xf7,0xf6,0xf5,0xf4,0xf2,0xf1,
0xef,0xee,0xec,0xea,0xe9,0xe7,0xe5,0xe3,0xe1,0xde,0xdd,0xda,
0xd8,0xd6,0xd4,0xd1,0xcf,0xcc,0xca,0xc7,0xc5,0xc2,0xbf,0xbc,
0xba,0xb7,0xb4,0xb1,0xae,0xab,0xa8,0xa5,0xa2,0x9f,0x9c,0x99,
0x96,0x93,0x90,0x8d,0x89,0x86,0x83,0x80,0x80,0x7c,0x79,0x76,
0x72,0x6f,0x6c,0x69,0x66,0x63,0x60,0x5d,0x5a,0x57,0x55,0x51,
0x4e,0x4c,0x48,0x45,0x43,0x40,0x3d,0x3a,0x38,0x35,0x33,0x30,
0x2e,0x2b,0x29,0x27,0x25,0x22,0x20,0x1e,0x1c,0x1a,0x18,0x16,
0x15,0x13,0x11,0x10,0x0e,0x0d,0x0b,0x0a,0x09,0x08,0x07,
- 13 -
机电0810班郝兴毕业设计
0x06,
0x05,0x04,0x03,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x02,0x03,0x04,0x05,
0x06,0x07,0x08,0x09,0x0a,0x0b,0x0d,0x0e,0x10,0x11,0x13,0x15,
0x16,0x18,0x1a,0x1c,0x1e,0x20,0x22,0x25,0x27,0x29,0x2b,0x2e,
0x30,0x33,0x35,0x38,0x3a,0x3d,0x40,0x43,0x45,0x48,0x4c,0x4e,
0x51,0x55,0x57,0x5a,0x5d,0x60,0x63,0x66 ,0x69,0x6c,0x6f,0x72,
0x76,0x79,0x7c,0x80 };/*正弦波码 */ void delay(uint z) //延时子程序 {
uchar i,j; for(i=z;i>0;i--) for(j=110;j>0;j--); }
void delay1(uint y) {
- 14 -
机电0810班郝兴毕业设计
uint i;
for(i=y;i>0;i--); }
void write_com(uchar com) //1602写指令 {
lcdrs=0; P1=com; delay(5); lcde=1; delay(5); lcde=0; }
void write_data(uchar date) {
lcdrs=1; P1=date; delay(5); lcde=1; delay(5); lcde=0; }
- 15 -
数据 //1602 机电0810班郝兴毕业设计
void init() //初始化 {
lcdrw=0; lcde=0; wr=0; cs=0;
write_com(0x38); write_com(0x0c); write_com(0x06); write_com(0x01); write_com(0x80+0x00);
write_data(0x77); //写wave: write_data(0x61); write_data(0x76); write_data(0x65); write_data(0x3a);
write_com(0x80+0x40); //写 f： write_data(0x66); write_data(0x3a); }
void write_f(uint date) //写频率 {
- 16 -