S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c24xx-nand s3c2410-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns s3c24xx-nand s3c2410-nand: NAND hardware ECC
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks
Creating 4 MTD partitions on \
0x000000000000-0x000000040000 : \ 0x000000040000-0x000000440000 : \ 0x000000440000-0x000000c40000 : \
0x000000c40000-0x000004000000 : \
Cirrus Logic CS8900A driver for Linux (Modified for SMDK2410) eth0: CS8900A rev E at 0xe0000300 irq=53, addr: 00: 0:3E:26:0A: 0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage USB Mass Storage support registered.
usbcore: registered new interface driver libusual usbcore: registered new interface driver usbserial USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver mousedev: PS/2 mouse device common for all mice S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled s3c-sdi s3c2410-sdi: powered down.
s3c-sdi s3c2410-sdi: mmc0 - using pio, sw SDIO IRQ TCP cubic registered
NET: Registered protocol family 17
s3c-rtc s3c2410-rtc: setting system clock to 2003-12-26 11:23:28 UTC (1072437808) cs8900_start
enable the ethernet controlle request_irq
IP-Config: Guessing netmask 255.255.255.0 IP-Config: Complete:
device=eth0, addr=192.168.2.200, mask=255.255.255.0, gw=255.255.255.255, host=192.168.2.200, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=192.168.2.201, rootpath= VFS: Mounted root (nfs filesystem) on device 0:12. Freeing init memory: 140K
Please press Enter to activate this console.
[root@$ /]#usb 1-1: new full speed USB device number 2 using s3c2410-ohci uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0316)
input: USB2.0 Camera as /devices/platform/s3c2410-ohci/usb1/1-1/1-1:1.0/input/input0 [root@$ /]#ls
beep_app dev home linuxrc root tmp bin etc led_app mnt sbin usr boot fun lib proc sys var