IBM Power AIX 6.1+Ha 7.1配置方法(2)

2019-03-28 11:42

Define Repository Disk and Cluster IP Address

What are the repository disk and cluster IP address ?

4.4.1.4.

Type or select values in entry fields.

Press Enter AFTER making all desired changes.

[Entry Fields] Cluster Name hisserver_cluster Currently Configured Node(s) hisserver1 hisserver2

当初始化完成群集之后,群集的网络、网络接口都已经自动配置好了。

----------------------------------------------info--------------------------------------------------------------------------

---- start ----

Warning: to complete this configuration, a repository disk must be defined.

Cluster Name: hisserver_cluster

Cluster Connection Authentication Mode: Standard Cluster Message Authentication Mode: None Cluster Message Encryption: None

Use Persistent Labels for Communication: No Repository Disk: None Cluster IP Address:

There are 2 node(s) and 1 network(s) defined

NODE hisserver1:

Network net_ether_01 hisserver1 10.52.1.1 hisserver1_boot2 10.52.2.1

NODE hisserver2:

Network net_ether_01 hisserver2_boot2 10.52.2.2 hisserver2 10.52.1.2

No resource groups defined Initializing..

Gathering cluster information, which may take a few minutes... Processing...

Storing the following information in file

/usr/es/sbin/cluster/etc/config/clvg_config

hisserver1:

Hdisk: hdisk0 PVID: 00f874e355ef7a89 VGname: rootvg VGmajor: 10

Conc-capable: No VGactive: Yes

Quorum-required:No

hisserver2:

Hdisk: hdisk0 PVID: 00f874e45588e2d4 VGname: rootvg VGmajor: 10

Conc-capable: No VGactive: Yes

Quorum-required:No

hisserver1:

Hdisk: hdisk1 PVID: 00f874e3338b7141 VGname: rootvg VGmajor: 10

Conc-capable: No VGactive: Yes

Quorum-required:No

hisserver2:

Hdisk: hdisk1 PVID: 00f874e43378f191 VGname: rootvg VGmajor: 10

Conc-capable: No VGactive: Yes

Quorum-required:No

hisserver1:

Hdisk: hdisk2 PVID: 00f874e33239aab1 VGname: None VGmajor: 0

Conc-capable: No VGactive: No

Quorum-required:No

hisserver2:

Hdisk: hdisk2 PVID: 00f874e33239aab1 VGname: None VGmajor: 0

Conc-capable: No VGactive: No

Quorum-required:No FREEMAJORS: 51... FREEMAJORS: 51...

Warning: There is no cluster found. cllsclstr: No cluster defined.

cllsclstr: Error reading configuration.

Communication path hisserver1 discovered a new node. Hostname is hisserver1. Adding it to the configuration with Nodename hisserver1.

Communication path hisserver2 discovered a new node. Hostname is hisserver2. Adding it to the configuration with Nodename hisserver2.

Discovering IP Network Connectivity

Retrieving data from available cluster nodes. This could take a few minutes.

Start data collection on node hisserver1 Start data collection on node hisserver2 Collector on node hisserver1 completed Collector on node hisserver2 completed Data collection complete

Completed 10 percent of the verification checks Completed 20 percent of the verification checks Completed 30 percent of the verification checks Completed 40 percent of the verification checks Completed 50 percent of the verification checks Completed 60 percent of the verification checks Completed 70 percent of the verification checks Discovered [6] interfaces

Completed 80 percent of the verification checks Completed 90 percent of the verification checks Completed 100 percent of the verification checks IP Network Discovery completed normally

Current cluster configuration:

Discovering Volume Group Configuration

---- end ----

4.4.2. 配置存储库磁盘

4.4.2.1.

Move cursor to desired item and press Enter.

Cluster Nodes and Networks

Cluster Applications and Resources

System Management (C-SPOC) Problem Determination Tools Custom Cluster Configuration

Can't find what you are looking for ? Not sure where to start ? 4.4.2.2.

Move cursor to desired item and press Enter.

Initial Cluster Setup (Typical)

Manage the Cluster Manage Nodes

Manage Networks and Network Interfaces

Discover Network Interfaces and Disks

Verify and Synchronize Cluster Configuration 4.4.2.3.

Move cursor to desired item and press Enter.

Setup a Cluster, Nodes and Networks

Define Repository Disk and Cluster IP Address

What are the repository disk and cluster IP address ? 4.4.2.4.

Type or select values in entry fields.

Press Enter AFTER making all desired changes.

[Entry Fields] ClusterName hisserver_cluster Repository Disk hdisk2

Cluster IP Address 228.168.1.1

4.4.3. 群集和存储库磁盘创建完成后,可以先同步下双

机。

4.4.3.1.

Move cursor to desired item and press Enter.

Cluster Nodes and Networks

Cluster Applications and Resources

System Management (C-SPOC) Problem Determination Tools Custom Cluster Configuration

Can't find what you are looking for ? Not sure where to start ? 4.4.3.2.

Move cursor to desired item and press Enter.

Initial Cluster Setup (Typical)


IBM Power AIX 6.1+Ha 7.1配置方法(2).doc 将本文的Word文档下载到电脑 下载失败或者文档不完整,请联系客服人员解决!

下一篇:Eclipse 100 油藏数模软件使用手册

相关阅读
本类排行
× 注册会员免费下载(下载后可以自由复制和排版)

马上注册会员

注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: