vlan create vif1 2007 1807 77 ifconfig vif1-77 172.18.72.212 netmask 255.255.255.224 route add default 172.18.72.222 1 #在控制器B上执行如下过程进行配置 DSSSG102> rdfile /etc/rc #Auto-generated by setup Wed Mar 21 09:36:55 GMT 2012 hostname DSSSG102 ifgrp create lacp vif1 -b ip e0a e0b ifconfig vif1 `hostname`-vif1 mediatype auto netmask 255.255.255.0 partner vif1 ifconfig e0M `hostname`-e0M flowcontrol full netmask 255.255.255.0 partner 172.18.73.249 #route add default NONE 1 routed on options dns.enable off options nis.enable off savecore DSSSG102> wrfile -a /etc/rc vlan create vif1 2007 1807 77 DSSSG102> wrfile -a /etc/rc ifconfig vif1-77 172.18.72.213 netmask 255.255.255.224 DSSSG102> wrfile -a /etc/rc route add default 172.18.72.222 1 DSSSG102> rdfile /etc/rc #Auto-generated by setup Wed Mar 21 09:36:55 GMT 2012 hostname DSSSG102 ifgrp create lacp vif1 -b ip e0a e0b ifconfig vif1 `hostname`-vif1 mediatype auto netmask 255.255.255.0 partner vif1 ifconfig e0M `hostname`-e0M flowcontrol full netmask 255.255.255.0 partner 172.18.73.249 #route add default NONE 1 routed on options dns.enable off options nis.enable off savecore vlan create vif1 2007 1807 77 ifconfig vif1-77 172.18.72.213 netmask 255.255.255.224 route add default 172.18.72.222 1 2.10 配置AutoSupport服务
#在两个控制器上按照如下参数进行配置 DSSSG102> options autosupport autosupport.cifs.verbose off autosupport.content complete (value might be overwritten in takeover) Page 33
NETAPP存储系统安装、配置和维护手册
autosupport.doit USER_TRIGGERED (testA) autosupport.enable on (value might be overwritten in takeover) autosupport.from nas01@cloudlight.com.cn (value might be overwritten in takeover) autosupport.local.nht_data.enable off (value might be overwritten in takeover) autosupport.local.performance_data.enable off (value might be overwritten in takeover) autosupport.mailhost 172.18.72.211 (value might be overwritten in takeover) autosupport.minimal.subject.id hostname (value might be overwritten in takeover) autosupport.nht_data.enable on (value might be overwritten in takeover) autosupport.noteto (value might be overwritten in takeover) autosupport.partner.to (value might be overwritten in takeover) autosupport.performance_data.doit DONT autosupport.performance_data.enable on (value might be overwritten in takeover) autosupport.periodic.tx_window 1h (value might be overwritten in takeover) autosupport.retry.count 15 (value might be overwritten in takeover) autosupport.retry.interval 4m (value might be overwritten in takeover) autosupport.support.enable on (value might be overwritten in takeover) autosupport.support.proxy (value might be overwritten in takeover) autosupport.support.to autosupport@netapp.com (value might be overwritten in takeover) autosupport.support.transport https (value might be overwritten in takeover) autosupport.support.url support.netapp.com/asupprod/post/1.0/postAsup (value might be overwritten in takeover) autosupport.throttle on (value might be overwritten in takeover) autosupport.to kanshi@cloudlight.com.cn,autosupport@netapp.com (value might be overwritten in takeover)
2.11 配置SSH
#在两个控制器上分别执行如下过程进行配置 DSSSG101> options ssh.enable on SSH Server is not configured. Please use the command 'secureadmin setup ssh' to configure the server. DSSSG101> secureadmin setup ssh SSH Setup --------- Determining if SSH Setup has already been done before...no SSH server supports both ssh1.x and ssh2.0 protocols. SSH server needs two RSA keys to support ssh1.x protocol. The host key is generated and saved to file /etc/sshd/ssh_host_key during setup. The server key is re-generated every hour when SSH server is running. SSH server needs a RSA host key and a DSA host key to support ssh2.0 protocol. Page 34
NETAPP存储系统安装、配置和维护手册
The host keys are generated and saved to /etc/sshd/ssh_host_rsa_key and /etc/sshd/ssh_host_dsa_key files respectively during setup. SSH Setup will now ask you for the sizes of the host and server keys. For ssh1.0 protocol, key sizes must be between 384 and 2048 bits. For ssh2.0 protocol, key sizes must be between 768 and 2048 bits. The size of the host and server keys must differ by at least 128 bits. Please enter the size of host key for ssh1.x protocol [768] : Please enter the size of server key for ssh1.x protocol [512] : Please enter the size of host keys for ssh2.0 protocol [768] : You have specified these parameters: host key size = 768 bits server key size = 512 bits host key size for ssh2.0 protocol = 768 bits Is this correct? [yes] Setup will now generate the host keys. It will take a minute. After Setup is finished the SSH server will start automatically. Wed Mar 21 09:05:56 GMT [DSSSG101: secureadmin.ssh.setup.passed:info]: SSH setup is done and ssh2 is enabled. Host keys are stored in /etc/sshd/ssh_host_key, /etc/sshd/ssh_host_rsa_key, and /etc/sshd/ssh_host_dsa_key. DSSSG101> options ssh.enable on DSSSG101> options ssh ssh.access * ssh.enable on ssh.idle.timeout 0 ssh.passwd_auth.enable on ssh.port 22 ssh.pubkey_auth.enable on ssh1.enable off ssh2.enable on
2.12 配置SNMP
#在两个控制器上按照如下参数进行配置 DSSSG102> options snmp Page 35
NETAPP存储系统安装、配置和维护手册
snmp.access legacy snmp.enable on DSSSG102> snmp contact: location: Dalian authtrap: 1 init: 1 traphosts: DBMSW003 community: ro NNITCODC
2.13 配置NTP
#在两个控制器上分别执行如下过程进行配置 DSSSG101> options timed.enable on DSSSG101> options timed.max_skew 5m DSSSG101> options timed.sched 5m DSSSG101> options timed.servers 202.225.132.244,202.225.132.245 DSSSG101> options time timed.enable on (same value in local+partner recommended) timed.log off (same value in local+partner recommended) timed.max_skew 5m (same value in local+partner recommended) timed.min_skew 0 (same value in local+partner recommended) timed.proto ntp (same value in local+partner recommended) timed.sched 5m (same value in local+partner recommended) timed.servers 202.225.132.244,202.225.132.245 (same value in local+partner recommended) timed.window 0s (same value in local+partner recommended) DSSSG101> timezone Current time zone is GMT DSSSG101> date Thu Mar 22 10:23:13 GMT 2012 DSSSG101> timezone Asia/Shanghai DSSSG101> date Thu Mar 22 18:23:28 CST 2012 Page 36
NETAPP存储系统安装、配置和维护手册
2.14 配置MTA
#可以在setup、sp setup和autosupport中设置邮件服务器地址
2.15 配置IPspace
#在两个控制器上分别执行如下过程进行配置 DSSSG102> ipspace create ipspace_hotel Thu Mar 22 03:27:42 GMT [DSSSG102: ip.drd.ipspace:warning]: The routing daemon (routed) is being turned off because more than one IP space was created. The routing daemon is not supported with multiple IP spaces. Ipspace \DSSSG102> ipspace assign ipspace_hotel vif1-2007 vif1-1807 DSSSG102> ipspace list Number of ipspaces configured: 2 default-ipspace (e0M losk vif1 vif1-77) ipspace_hotel (vif1-2007 vif1-1807)
2.16 配置MultiStore
#在控制器A上执行如下过程进行配置 DSSSG101> sysconfig -r Aggregate aggr0 (online, raid_dp) (block checksums) Plex /aggr0/plex0 (online, normal, active, pool0) RAID group /aggr0/plex0/rg0 (normal) RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks) --------- ------ ------------- ---- ---- ---- ----- -------------- -------------- dparity 0a.00.0 0a 0 0 SA:A 0 BSAS 7200 847555/1735794176 847884/1736466816 parity 0a.00.1 0a 0 1 SA:A 0 BSAS 7200 847555/1735794176 847884/1736466816 data 0a.00.2 0a 0 2 SA:A 0 BSAS 7200 847555/1735794176 847884/1736466816 Page 37
NETAPP存储系统安装、配置和维护手册