Solaris 10 系统安装
说明：蓝色字体是配置选项。
T4安装步骤：
配置管理口的时候，默认情况下 state=disabled
需要更改配置将state置为enabled set state=enabled 最后执行
set commitpending=true
1配置管理接口
Oracle(R) Integrated Lights Out Manager
Version 3.0.16.7.c r73993
Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
Warning: The system appears to be in manufacturing test mode. Contact Service immediately.
Warning: password is set to factory default.
-> cd /SP/network /SP/network
-> show
/SP/network Targets:
interconnect ipv6
test
Properties:
commitpending = (Cannot show property) dhcp_server_ip = none ipaddress = 192.168.2.106 ipdiscovery = static
ipgateway = 192.168.2.250 ipnetmask = 255.255.255.0
macaddress = 00:10:E0:0E:92:09
managementport = /SYS/MB/SP/NETMGMT outofbandmacaddress = 00:10:E0:0E:92:09 pendingipaddress = 192.168.2.106 pendingipdiscovery = static
pendingipgateway = 192.168.2.250 pendingipnetmask = 255.255.255.0
pendingmanagementport = /SYS/MB/SP/NETMGMT sidebandmacaddress = 00:10:E0:0E:92:08 state = enabled
Commands: cd set show
-> set pendingipaddress=192.168.1.100 Set 'pendingipaddress' to '192.168.1.100'
-> set pendingipgateway=192.168.1.1 Set 'pendingipgateway' to '192.168.1.1'
-> set commitpending=true Set 'commitpending' to 'true'
-> set pendingipdiscovery = static Set 'pendingipdiscovery' =to 'static'
->set pendingipdiscovery = static Set 'pendingipdiscovery '= 'static'
-> stop /SYS Are you sure you want to stop /SYS (y/n)? y stop: Target already stopped
停止初始系统 -> set /HOST/bootmode script=\ 设置系统启动后进入ok模式 Set 'script' to 'setenv auto-boot? false'
-> start /SYS
Are you sure you want to start /SYS (y/n)? Y start: Target already started
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started. To stop, type #.
Primary Bootstrap.
2 做硬raid （在OK模式下）
T4服务器做raid1系统大概需要运行15个小时
{0} ok probe-scsi-all 查看系统硬盘路径 /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2
Unit 0 Removable Read Only device AMI Virtual CDROM 1.00
/pci@400/pci@2/pci@0/pci@4/scsi@0
FCode Version 1.00.60, MPT Version 2.00, Firmware Version 9.00.00.00
Target 9
Unit 0 Disk HITACHI H106030SDSUN300G A2B0 585937500 Blocks, 300 GB SASDeviceName 5000cca02534e880 SASAddress 5000cca02534e881 PhyNum 0 Target a
Unit 0 Removable Read Only device TEAC DV-W28SS-V 1.0B SATA device PhyNum 6 Target b
Unit 0 Disk HITACHI H106030SDSUN300G A2B0 585937500 Blocks, 300 GB SASDeviceName 5000cca02534e8d0 SASAddress 5000cca02534e8d1 PhyNum 1
/pci@400/pci@1/pci@0/pci@6/SUNW,qlc@0,1
QLogic QLE2562 Host Adapter FCode(SPARC): 2.03 06/30/08 Firmware version 4.03.02 Fibre Channel Link down
Possible causes: No cable, incorrect connection mode or data rate SFP state: 8Gb Present
/pci@400/pci@1/pci@0/pci@6/SUNW,qlc@0
QLogic QLE2562 Host Adapter FCode(SPARC): 2.03 06/30/08
Firmware version 4.03.02 Fibre Channel Link down
Possible causes: No cable, incorrect connection mode or data rate SFP state: 8Gb Present
/pci@400/pci@1/pci@0/pci@4/scsi@0
FCode Version 1.00.60, MPT Version 2.00, Firmware Version 9.00.00.00
{0} ok
{0} ok select /pci@400/pci@2/pci@0/pci@4/scsi@0 进入系统硬盘路径 {0} ok
{0} ok show-children 查看系统硬盘id及其他信息
FCode Version 1.00.60, MPT Version 2.00, Firmware Version 9.00.00.00
Target 9
Unit 0 Disk HITACHI H106030SDSUN300G A2B0 585937500 Blocks, 300 GB SASDeviceName 5000cca02534e880 SASAddress 5000cca02534e881 PhyNum 0 Target a
Unit 0 Removable Read Only device TEAC DV-W28SS-V 1.0B SATA device PhyNum 6 Target b
Unit 0 Disk HITACHI H106030SDSUN300G A2B0 585937500 Blocks, 300 GB SASDeviceName 5000cca02534e8d0 SASAddress 5000cca02534e8d1 PhyNum 1 {0} ok show-volumes 查看系统硬盘是否已有raid No volumes to show
{0} ok 9 b create-raid1-volume 创建系统硬盘raid1 Target 9 size is 583983104 Blocks, 298 GB Target b size is 583983104 Blocks, 298 GB
The volume can be any size from 1 MB to 285148 MB What size do you want? [285148]
Volume size will be 583983104 Blocks, 298 GB Enter a volume name: [0 to 15 characters] Volume has been created {0} ok {0} ok
3 做lable
插入系统盘solaris 10 {0} ok
{0} ok boot cdrom -s 进入单用户模式 Boot device: /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p6 File and args: -s
SunOS Release 5.10 Version Generic_147440-01 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. Booting to milestone \Configuring devices. WARNING: /pci@400/pci@2/pci@0/pci@4/scsi@0/iport@v0/disk@w3c746dae7c726a8a,0 (sd6):
Corrupt label; wrong magic number #
# format Searching for disks...WARNING: /pci@400/pci@2/pci@0/pci@4/scsi@0/iport@v0/disk@w3c746dae7c726a8a,0 (sd6): Corrupt label; wrong magic number done
WARNING: /pci@400/pci@2/pci@0/pci@4/scsi@0/iport@v0/disk@w3c746dae7c726a8a,0 (sd6):
Corrupt label; wrong magic number
c1t3C746DAE7C726A8Ad0: configured with capacity of 277.99GB format> q # init 0
# syncing file systems... done Program terminated {0} ok boot cdrom
Boot device: /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p6 File and args: SunOS Release 5.10 Version Generic_147440-01 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. Configuring devices.
Using RPC Bootparams for network configuration information.
4 开始安装
说明：[X] 中括号中X代表选中，[]中括号代表不选中。
Select a Language
0. English
1. Brazilian Portuguese 2. French 3. German 4. Italian 5. Japanese