SmartPlant Spoolgen
Training Labs
Version 2.0
Date 10/06/10
Doc Number
DSPG-TP-100002A
Copyright
Copyright ? 2009 Intergraph Corporation. All Rights Reserved.
Including software, file formats, and audiovisual displays; may be used pursuant to applicable software license agreement; contains confidential and proprietary information of Intergraph and/or third parties which is protected by copyright law, trade secret law, and international treaty, and may not be provided or otherwise made available without proper authorization from Intergraph Corporation.
U.S. Government Restricted Rights Legend
Use, duplication, or disclosure by the government is subject to restrictions as set forth below. For civilian agencies: This was developed at private expense and is \the Commercial Computer Software - Restricted Rights clause at 52.227-19 of the Federal Acquisition Regulations (\and is unpublished and all rights are reserved under the copyright laws of the United States. For units of the Department of Defense (\This is \227.7202-3.
Unpublished - rights reserved under the copyright laws of the United States. Intergraph Corporation
Huntsville, Alabama 35894-0001
Terms of Use
Use of this software product is subject to the End User License Agreement and Limited Product Warranty (\software product unless the licensee has a valid signed license for this software product with Intergraph Corporation. If the licensee has a valid signed license for this software product with Intergraph Corporation, the valid signed license shall take precedence and govern the use of this software product. Subject to the terms contained within the applicable license agreement, Intergraph Corporation gives licensee permission to print a reasonable number of copies of the documentation as defined in the applicable license agreement and delivered with the software product for licensee's internal, non-commercial use. The documentation may not be printed for resale or redistribution. Intergraph and the Intergraph logo are registered trademarks of Intergraph Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Other brands and product names are trademarks of their respective owners.
Warranties and Liabilities
All warranties given by Intergraph Corporation about equipment or software are set forth in the EULA provided with the software or applicable license for the software product signed by Intergraph Corporation, and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such warranties. Intergraph believes the information in this publication is accurate as of its publication date.
The information and the software discussed in this document are subject to change without notice and are subject to applicable technical product descriptions. Intergraph Corporation is not responsible for any error that may appear in this document.
The software discussed in this document is furnished under a license and may be used or copied only in accordance with the terms of this license. No responsibility is assumed by Intergraph for the use or reliability of software on equipment that is not supplied by Intergraph or its affiliated companies. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINAL EVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT.
Intergraph is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol data. Users should verify for themselves that the data is accurate and suitable for their project work.
Trademarks
Intergraph, the Intergraph logo, PDS, SmartPlant, SmartSketch, FrameWorks, INtools, MARIAN, and IntelliShip are registered trademarks and SupportModeler and SupportManager are trademarks of Intergraph Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. MicroStation is a registered trademark of Bentley Systems, Inc. ISOGEN and SPOOLGEN are registered trademarks of Alias Limited.
Contents
Introduction ................................................................................................................................................. 2 Lab 1 - Aims & Objectives ............................................................................................................................ 3 Lab 1 – Basic Functions ................................................................................................................................ 1 Lab 2 - Aims & Objectives .......................................................................................................................... 14 Lab 2 – Further Functions .......................................................................................................................... 15 Lab 3 – Aims & Objectives ......................................................................................................................... 27 Lab 3 – Material Editor ............................................................................................................................... 28 Lab 4 – Aims & Objectives ......................................................................................................................... 40 Lab 4 – Advanced and techniques ............................................................................................................. 41
Replay .................................................................................................................................................. 41
Converting elbows to bends ................................................................................................................. 43 Weld Gaps ............................................................................................................................................ 47 Revision History ......................................................................................................................................... 51
错误！使用“开始”选项卡将 Title 应用于要在此处显示的文字。 错误！使用“开始”选项卡将 Subtitle 应用于要在此处显示的文字。 1
错误！使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。
Introduction
SmartPlant Spoolgen is a high productivity isometric drawing system that creates spool sheets and isometric drawings from piping data files. Because it is a self-contained system, it requires no other software to drive it with the exception of a 2D graphics system for the viewing and plotting of the output isometrics. The following graphic illustrates the standard flow of data:
2错误！使用“开始”选项卡将 Title 应用于要在此处显示的文字。 错误！使用“开始”选项卡将 Subtitle 应用于要在此处显示的文字。
错误！使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。
Lab 1 - Aims & Objectives
This lab is intended to show you the basics of SmartPlant Spoolgen, after this lab you will understand the basic workflow and basic functions. The following features will be shown:
? Importing data (IDF) ? Checking in / Checking out ? Splitting drawings
? Adding site and workshop welds ? Adding Pipeline Attributes ? Generating isometrics
? Understanding the Workflow Database
错误！使用“开始”选项卡将 Title 应用于要在此处显示的文字。 错误！使用“开始”选项卡将 Subtitle 应用于要在此处显示的文字。 3