OPC配置说明
第一步:
安装 组态软件: SIMATIC NET V6.2 第二步: 安装授权号 第三步: 配置OPC:
1. 打开 “Station Coniguration Editor”
a) 对 Index1 插入 OPCServer 如下图:
b) Index3里插入 IE General (选择对应的网卡)
2. 配置控制台 (Configuration Console) (用于PC硬件组件和PC应用程序的组态和诊断,
是 组态设置和诊断的核心工具)
i. 网卡模式 由 PG MODE 变为 Configuration mode , index = 3
ii.
设置 Access points 的 S7ONLINE 属性: 问 PC internal (local)
3. 在 STEP7中组态 PC Station
打开 SIMATIC NCM PC Manager , File -> New 建立新项目 a) 新建项目 “LGMazak2” 如图:
b) Insert->Station->Simatic Pc Station 插入一个PC站(注意 StationName 要与
Station Configuratino Editor 里的一致)
c) 选中 pc station ,双击 Configuration 进入PC Station 组态界面
d) 将 Simatic pc station->User application -> OPC Server -> SW V6.1 拖到 1行
如下图所示 :