华为的MSTP+VRRP配置(2)

[Huawei-Ethernet0/0/4]q

[Huawei]ip route-static 1.1.1.1 32 192.168.0.6 [Huawei]ip route-static 0.0.0.0 0 192.168.0.9 [Huawei]dis vrrp bri [Huawei]dis vrrp brief

VRID State Interface Type Virtual IP ---------------------------------------------------------------- 1 Backup Vlanif11 Normal 192.168.1.1 2 Backup Vlanif21 Normal 172.16.0.1 3 Master Vlanif22 Normal 172.16.1.1 ---------------------------------------------------------------- Total:3 Master:1 Backup:2 Non-active:0 [Huawei]

LSW3

The device is running!

undo terminal monitor

Info: Current terminal monitor is off. system-vew ^

Error: Unrecognized command found at '^' position. system-view

Enter system view, return user view with Ctrl+Z. [Huawei]vlan batch 11 22

Info: This operation may take a few seconds. Please wait for a moment...done.

[Huawei]interface vlanif 11

[Huawei-Vlanif11]ip address 192.168.1.5 28 [Huawei-Vlanif11]q

[Huawei]interface ethernet 0/0/3

[Huawei-Ethernet0/0/3]port link-type access [Huawei-Ethernet0/0/3]port default vlan 22 [Huawei-Ethernet0/0/3]interface ethernet 0/0/1 [Huawei-Ethernet0/0/1]port link-type trunk

[Huawei-Ethernet0/0/1]port trunk allow-pass vlan 11 22 [Huawei-Ethernet0/0/1]interface ethernet 0/0/2 [Huawei-Ethernet0/0/2]port link-type trunk

[Huawei-Ethernet0/0/2]port trunk allow-pass vlan 11 22 [Huawei-Ethernet0/0/2]

User interface con0 is available

Please Press ENTER.

LSW4

Please press enter to start cmd line!

undo terminal monitor

Info: Current terminal monitor is off. system-view

Enter system view, return user view with Ctrl+Z. [Huawei]vlan batch 11 21

Info: This operation may take a few seconds. Please wait for a moment...done.

[Huawei]interface vlanif 11

[Huawei-Vlanif11]ip address 192.168.1.4 28 [Huawei-Vlanif11]q

[Huawei]interface ethernet0/0/3

[Huawei-Ethernet0/0/3]port link-type access [Huawei-Ethernet0/0/3]port default vlan 21 [Huawei-Ethernet0/0/3]interface ethernet 0/0/1 [Huawei-Ethernet0/0/1]port link-type trunk

[Huawei-Ethernet0/0/1]port trunk allow-pass vlan 11 21 [Huawei-Ethernet0/0/1]interface ethernet0/0/2 [Huawei-Ethernet0/0/2]port link-type trunk

[Huawei-Ethernet0/0/2]port trunk allow-pass vlan 11 21 [Huawei-Ethernet0/0/2]q [Huawei]vlan 11

[Huawei-vlan11]description Guanli [Huawei-vlan11]dis this # vlan 11

description Guanli # return

[Huawei-vlan11] User interface con0 is available

Please Press ENTER.