湖北省黄冈电力集体企业2016年电力工程设备材料公开框架招标
10kV箱式变电站通用技术规范 （编号：1001012-0000-00）
招标文件
（技术规范）
本规范对应的专用技术规范目录
序号 1 2
名 称 10kV美式箱变专用技术规范 10kV欧式箱变专用技术规范 编 号 1001012-0010-01 1001012-0010-02
箱式变电站采购标准技术规范使用说明
1. 本规范分为通用部分、专用部分。
2. 技术规范通用部分原则上不需要设备招标人（项目单位）填写，更不允许随意更改。如对其条款内容确实需要改动，项目单位应填写通用部分条款变更表并加盖该网、省公司招投标管理中心公章及辅助说明文件随招标计划一起提交至招标文件审查会。经技术规范审查同意后，对通用部分的修改形成项目单位技术偏差表，放入专用部分，随招标文件同时发出并视为有效。
3. 采购标准技术规范专用部分分为标准技术参数、项目单位需求部分和投标人响应部分。标准技术参数表中“标准参数值”栏是标准化参数，不允许项目单位和投标人改动。项目单位对“标准参数值”栏的差异部分，应填写项目单位技术偏差表（见表7），“投标人保证值”栏应由投标人认真逐项填写。项目单位需求部分由项目单位填写，包括招标设备的工程概况和招标设备的使用条件。对扩建工程，可以提出与原工程相适应的一次、二次及土建的接口要求。投标人响应部分由投标人填写投标人技术参数偏差表（见表11），提供销售业绩、主要部件材料和其他要求提供的资料。
4. 投标人填写技术参数和性能要求响应表时，如与招标人要求有差异时，除填写投标人技术参数偏差表见表11外，必要时应提供相应的试验报告。
5. 有关污秽、温度、海拔等需要修正的情况由项目单位提出并在专用部分的项目单位技术偏差表（见表7）中明确表示。
6. 技术规范的页面、标题等均为统一格式，不得随意更改。
目 次
箱式变电站采购标准技术规范使用说明 ··················································································· 1 总则 ···························································································································· 1.1 一般规定 ·················································································································· 1.2 投标人应提供的资格文件 ································································································ 1.3 适用范围 ·················································································································· 1.4 对设计图纸、说明书和试验报告的要求 ················································································· 1.5 标准和规范 ················································································································ 1.6 投标人必须提交的技术参数和信息 ······················································································ 1.7 备品备件 ·················································································································· 1.8 专用工具与仪器仪表 ····································································································· 1.9 安装、调试、性能试验、试运行和验收 ················································································· 2 结构及其他要求 ············································································································· 2.1 箱式变电站技术参数 ····································································································· 2.2 通用要求 ·················································································································· 3 试验 ···························································································································· 3.1 型式试验 ·················································································································· 3.2 出厂试验 ·················································································································· 3.3 现场交接试验 ············································································································· 4 技术服务、工厂检验和监造 ······························································································ 4.1 技术服务 ·················································································································· 4.2 工厂检验和监造 ··········································································································
1 总则
1.1 一般规定
1.1.1 投标人应具备招标公告所要求的资质，具体资质要求详见招标文件的商务部分。 1.1.2 投标人须仔细阅读包括本技术规范（通用部分和专用部分）在内的招标文件阐述的全部条款。投标人提供的箱式变电站应符合招标文件所规定的要求。
1.1.3 本技术规范提出了对箱式变电站的技术参数、性能、结构、试验等方面的技术要求。 1.1.4 本技术规范提出的是最低限度的技术要求，并未对一切技术细节做出规定，也未充分引述有关标准和规范的条文，投标人应提供符合本技术规范引用标准的最新版本标准和本招标文件技术要求的全新产品，如果所引用的标准之间不一致或本招标文件所使用的标准如与投标人所执行的标准不一致时，按要求较高的标准执行。
1.1.5 如果投标人没有以书面形式对本招标文件技术规范的条文提出差异，则意味着投标人提供的设备完全符合本招标文件的要求。如有与本招标文件要求不一致的地方，必须逐项在投标人技术参数偏差表（见表8）中列出。
1.1.6 本技术规范将作为订货合同的附件，与合同具有同等的法律效力。本招标文件技术规范未尽事宜，由合同签约双方在合同谈判时协商确定。
1.1.7 本技术规范中涉及有关商务方面的内容，如与招标文件的商务部分有矛盾时，以商务部分为准。
1.1.8 本技术规范中通用部分各条款如与技术规范专用部分有冲突，以专用部分为准。 1.2 投标人应提供的资格文件
投标人在投标文件中应提供下列有关资格文件，否则视为非响应性投标。 1.2.1 投标人或制造商投标产品的销售记录（按本技术规范专用部分3.2 投标产品的销售及运行业绩表提供）及相应的最终用户的使用情况证明。
1.2.2 投标人或制造商应提供权威机关颁发的ISO 9000系列的认证书或等同的质量保证体系认证证书。
1.2.3 投标人或制造商应提供履行合同所需的技术和主要设备等生产能力的文件资料。 1.2.4 投标人应提供有能力履行合同设备维护保养、修理及其他服务义务的文件。 1.2.5 投标人或制造商应提供投标产品全部有效的型式试验报告。
1.2.6 投标人或制造商应提供一份详细的投标产品中重要外购或配套部件供应商清单及检验报告。
1.2.7 投标人或制造商应提供投标产品中进口关键元件供应商的供货承诺函。 1.3 适用范围
1.3.1 本技术规范的适用范围仅限于本工程的投标产品，内容包括设计、结构、性能、安装、试验、调试及现场服务和技术服务。 1.3.2 中标人应不晚于签约后2周内，向招标人提出一个详尽的生产进度计划表（见表1），包括产品设计、材料采购、产品制造、厂内测试以及运输等项的详情，以确定每部分工作及其进度。
表1 生产进度计划表
合同号： 型号规格： __________
技术规范号：___________ __________________
到岸日期：_____________
时间（年月日） 到达交货地点日期： 工作号：___________________
离
岸
日
期
：
项目名称： 工作日期： 至
设备名称： 制造商名称及地址：