3.2. Governing equations
The retained equations that describe the dynamic of the fluid in the pipe are the following ones:
The continuity equation for each species i in conservative law form
The momentum equation in conservative law form
ρS ρuS
=0 +
The total energy equation in conservative law form
ρuS ρu2+pS S1
+ p+fuρu=0 ρES (ρE+p)uS
+ 2hc(Twall T=0. 1
E=cvT+u2,
2
()
In these equations, Twall is the pipe wall temperature, E is the specific total energy defined as
where cv is the specific heat at constant volume.
The friction coefficient f depends on the roughness cr and on Reynold’s number Re defined as:
Re=
ρDu
, µ
where µ is the dynamic viscosity of the fluid.
The convective heat transfer coefficient hc is defined as
hc=Nu
λ
where λ is the heat transfer coefficient and Nu Nusselt’s number depending on Re ,f, cr and Prandtl’s number Pr which is defined as
,
Pr=
µcp
. λ
cp is the specific heat at constant pressure.
The retained models for f and Nu will be presented further in the document.