as the one defined in the Gas Data submodel. The third parameter is the targeted mesh size for the whole CFD1D network (discretization length). The final parameter concerns the output of run statistics specifically related to the CFD1D integration. For more information about these data, please refer to the submodel documentation.
In each pipe the mesh size will be computed to be the closest as possible to the targeted mesh size – the mesh size is equal to the length of the pipe divided by the number of cells. In practice, the difference between targeted mesh size and computed one is greater for
smaller pipes, but the difference is always lower than 17% – that value is reached for a pipe whose length is equal to 3.5 times the targeted mesh size.
It is possible to put more than one CFD1D network on the same sketch. All the new network components have to share a mixture index different from the existing network. The figure below shows an example where all the parameters “associated gas properties”, “mixture index” and “mesh size” are different from the first CFD1D network.
The parameters for the left-hand-side source are shown below:
In the figure that follows, we present the parameters for the pipe: