Create Region Create Simulation Region– Select the menu item Draw Region– In Region window, 1. Padding all directions similarly: Checked 2. Padding Type: Percentage Offset– Value: 500 3. Press OK
Note: As core and coil are in direct contact with each other, an insulation boundary is needed to be defined between them to avoid current leakage from coil to core. But in or case its is not necessary as the ferrite core has a conductivity= 0.01S/m which below the default conductor/insulation threshold of 1S/m
© 2013 ANSYS, Inc.
May 21, 2013
11
Release 14.5