10cm long Transmission line on 0.8mm thickness PCB 建立一新Schematic file將量測結果FR4.S2P檔案，放到ADS中。在Data Items元件庫中選取S2P元件,並點擊S2P元件兩下進入對話視窗
點選”BROWSE”按鈕,搜尋路徑放入FR4.S2P
完成Schematic圖存成FR4_S2P，並執行之
Measured data were displayed in ADS Data Display視窗
執行Optimization直到完所有Goal目標
可以在plot trace視窗中加入measured data及simulation results