智能电池充电器的设计毕业论文 - 应用电子

2020-02-21 22:35

Anhui Vocactional & Technical College of Industry & Trade

毕 业 论 文

智能电池充电器的设计

Design of intelligent charger

所在系院:

专业班级:

学生学号:

学生姓名:

指导教师:

电气与信息工程系

应用电子技术

2013年 3 月 18 日

安徽工贸职业技术学院 毕业设计(论文)任务书

系(院) 电气与信息工程系 专业 应用电子技术 班级 2班 学生姓名 学号 2010050212

一、题 目: 智能电池充电器的设计 二、内容与要求:

1.智能充电器的设计所涉及的基本内容大概有: 第一,有关铅蓄电池的电化学原理和充放电原理。 第二,关于充电器对铅蓄电池充电的原理及其电路设计。 第三,充电器对充电过程的检测及其自动转换。

2.阐述了该充电器的充电方式、控制方法的设计以及整个电路的分析。

三、设计(论文)起止日期:

任务下达日期: 年 月 日 完成日期: 年 月 日

指导教师签名: 年 月 日 四、教研室审查意见:

教研室负责人签名:

年 月 日

安徽工贸职业技术学院 毕业设计(论文)成绩评定

专业、班级 10应电(2)班 学生姓名 完成日期 题 目: 智能电池充电器的设计

毕业设计(论文)共 29 页,其中:图 19 幅,表 2 个 毕业设计(论文)指导小组评定意见:

毕业论文成绩的评定:

指导教师审阅成绩(70%)

系(院)负责人签名:

年 月 日

评阅教师评阅成绩(30%) 总 分

安徽工贸职业技术学院毕业设计(论文)

智能电池充电器的设计

摘要 本文着重介绍了慢脉冲智能充电方法的应用,同时还介绍了关于慢脉冲快速充电方

法的基本原理,其中本文主要以对电瓶的充电为例,利用慢脉冲快速充电的方法来提高充电速度。在充电过程中主要选择用单片机控制,实现对过冲保护。该系统具有自动化程度高、运行费用低、工作可靠性能强等优点。

由于铅酸蓄电池维护简单、价格低廉、供电可靠、使用寿命长,广泛作为汽车、飞机、轮船等机动车辆或发电机组的启动电源,也在各类需要不间断供电的电子设备和便携式仪器仪表中用作一些电器及控制回路的工作电源。随着经济的发展,大容量蓄电池的应用迅速增加,人们希望能快捷、安全地对蓄电池进行充电。因此,为了适应市场的需求,我们需要设计一种铅蓄电池智能充电器。

关键词:智能电瓶充电器 89S51单片机 传感器

I

安徽工贸职业技术学院毕业设计(论文)

Design of intelligent charger

Abstract This article mainly introduces the slow pulse intelligent charging method of

application, and also introduces the slow pulse fast charging method about the basic principle of this article mainly to the storage charge as an example, the use of slow pulse fast charging method to improve the speed of the charge. During charging mainly choose to use single chip microcomputer control, realize-the blunt protection. The system has a high degree of automation,low operating cost, reliable performance is strong, etc.

Due to the lead-acid battery simple maintenance and low prices, power supply reliability, service life is long, wide as cars, planes and ships motor vehicle or the starting power generating set, also in all kinds of need a continuous supply of electronic devices and portable instruments for some appliances and control circuit work power. With the development of economy, the application of the large capacity battery rapidly, and people hope to fast, safely to charge the battery. Therefore, in order to adapt to the demand of the market, we need to design a kind of lead battery intelligent charger.

Keywords:Intellingent battery charger 89S51 single chip microcomputer Sensor

II


智能电池充电器的设计毕业论文 - 应用电子.doc 将本文的Word文档下载到电脑 下载失败或者文档不完整,请联系客服人员解决!

下一篇:河北某电厂p3、mis管理规划 - secret

相关阅读
本类排行
× 注册会员免费下载(下载后可以自由复制和排版)

马上注册会员

注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: