你正在从vSphere网页客户端编辑网络配置管理ESXi 6.x主机。你错误地把不正确的VLAN配置到管理网络中。
What action do you need to take to correct this? 你需要采取什么行动来纠正
A. You need to manually edit the configuration on the host with command line utilities. 您需要手动编辑配置主机利用命令行实用工具
B. No action is required. By default ESXi rolls back configuration changes that disconnect the host.
不需要动作。默认情况下断开主机 ESXi回滚配置更改。
C. The ESXi host system configuration will need to be restored to the factory configuration to fix the issue.
ESXi主机系统配置需要恢复到出厂设置来解决这个问题
D. The change can be reverted in the vSphere Web Client by simply editing the switch again. 只需再次编辑开关就可以可以恢复vSphere Web客户端变化 Answer: B
Explanation:
QUESTION NO: 13
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. 你刚刚安装ESXi 6。x主机。作为贵公司的安全法规,安全标语必须配置于主机的控制台上。
How can this action be accomplished? 如何完成这个动作
A. Configure the Advanced Settings > Annotations screen of the ESXi host. 置高级设置>注释ESXi主机的屏幕
B. This is configured from the Direct Console User Interface configuration menu. 从直接控制台用户界面配置菜单配置
C. It is not possible to configure a security banner for the ESXi host. 不可能为ESXi主机配置安全标语
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration. 从vCenter服务器,这个设置在vCenter服务器里全局配置. Answer: A
Explanation:
QUESTION NO: 14
In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server.
公司为了满足监管要求,所有ESXi 6。x主机必须直接配置到syslog服务器日志。
What are two ways ESXi hosts can configured for this action? (Choose two) ESXi主机可以通过哪两种方式进行配置 A. Use the esxcli system syslog command. 使用syslog esxcli系统命令
B. Edit them in the ESXi host Advanced System Settings. 在ESXi主机高级系统设置编辑它们
C. From the Syslog collector user interface of the Web Client. 从Web客户端的Syslog收集器的用户界面
D. Syslog logging is not available for ESXi Hosts. Syslog日志记录是不能用于ESXi主机。
Answer: A,B
Explanation:
QUESTION NO: 15
An administrator is performing an interactive installation of ESXi 6.x. 管理员执行交互式安装ESXi 6. x
Which three options are available for installation? (Choose three.) 哪三个选项可用于安装 A. DVD
B. USB
C. PXE
D. Scripted 脚本
E. Auto Deploy 自动部署
Answer: A,B,C
Explanation:
QUESTION NO: 16
An administrator is performing a scripted installation of ESXi 6.x.
管理员执行脚本安装ESXi 6. x。
In which three locations does the script need to be? (Choose three.) 哪三个地方是脚本需要的 A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore VVOLs数据存储 Answer: B,C,D
Explanation:
QUESTION NO: 17
Which three items should be validated prior to installing ESXi 6.x? (Choose three.) 在安装ESXi 6.x之前哪三个需要被确认? A. Remote Storage has been disconnected. 远程存储器需要断开
B. Installation media is available. 安装媒介是有效的
C. Server hardware clock is set to UTC. 服务器硬件时钟设置成UTC
D. Storage has been partitioned with a VMFS volume. 存储器通过VMFS卷分割
E. Network cards have been setup to use Jumbo Frames. 网卡设置使用巨型帧。 Answer: A,B,C
Explanation:
QUESTION NO: 18
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host.
管理员已经完成一个交互式ESXi 6.x的安装，正在启动主机
How is the network initially configured? 网络最初是如何配置的?
A. The network is configured by Automatic Private IP Addressing (APIPA). 网络通过APIPA配置
B. The network is configured based on the settings detected in DNS. 网络的配置基于在DNS检测到的设置
C. The network is configured with the address as specified in the installer. 网络配置基于安装程序详细说明的地址
D. The network is automatically configured by DHCP. 网络通过DHCP自动配置 Answer: D
Explanation:
QUESTION NO: 19
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured.
管理员已经完成一个交互式ESXi 6.x的安装，但是不知道配置了哪个地址
Where is the ESXi host IP address configured? ESXi IP地址配置在哪儿 A. RVC console RVC控制台
B. Direct Console User Interface 指向控制用户界面 C. vSphere Web Client vSphere网页客户端 D. vSphere Client vSphere客户端
Answer: B
Explanation:
QUESTION NO: 20
An administrator has just configured the IP address on an ESXi host from the Direct Console User Interface.
管理员刚刚在ESXi主机直接控制台的用户界面配置IP地址。
How can the configuration be validated as correct without any additional tools? 在没任何额外的工具时如何验证这些配置是正确的
A. Add the host to vCenter Server and if it works, then all networking settings are ok. 将主机添加到vCenter服务器,如果成功的话,那么所有网络设置就可以了 B. Select the Test Management Network option from the DCUI. 从DCUI选择测试管理网络选项。
C. Connect to the host with the vSphere Client and click the Test Network option. 连接到主机与vSphere客户端并单击测试网络的选择
D. Use PowerCLI to connect to the host and initiate a network test. 使用PowerCLI连接到主机并启动一个网络测试 Answer: B
Explanation:
QUESTION NO: 21
An administrator has recently installed a new ESXi 6.x Host, and during the configuration noticessporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.
管理员最近安装了一个新的ESXi 6.x主机,在配置noticessporadic网络问题,检查是否这个问题发生在某个配置时候,管理员想重置系统。
How can this be accomplished in the shortest amount of time? 如何能在最短的时间内完成
A. Run the ESXi installer again and reinstall the host. 再次运行ESXi安装程序,重新安装主机
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
从vSphere客户端直接连接到主机时选择重置系统配置选项
C. From the Direct Console User Interface, select Reset System Configuration. 从直接控制台的用户界面,选择重置系统配置
D. Use a host profile to reset the configuration to a default state. 使用主机配置文件配置重置为默认状态 Answer: C
Explanation:
QUESTION NO: 22
Your manager has given you a bash script that retrieves data for ESXi 6.x host configurations. This data needs to be collected right after the installation of a host and must be run directly on the host.