DTGH-D-043-MG3000-T4-串口控制台使用手册
4 H.323协议的配置
MG3000-T4中继媒体网关控制台提供用户对H323协议的配置，主要包括连接方式，是否注册，以及RAS相关配置等。
4.1 配置H.323的呼叫方式
该命令用于配置H323常用参数，包括本端的H323ID以及连接模式。说明如下： MG3000-T4:\\H323> cgen Please input H.323-ID[]:gohigh
Please input the type of connect mode (0-Normal,1-FastStart,2-Tunneling,3-Tunneling+FastStart) :[0] : To apply modified value to system you must reboot!! The command has been completed successfully!
4.2 使用注册的方式工作
cras命令用于配置RAS协议参数。默认的情况下是不使用注册方式工作的。说明如下： MG3000-T4:\\H323> cras
Please input CallsRegStyle(0-GK,1-NOGK) :[1] : 0（默认是不使用注册方式工作） Please input GKDiscovery(0-nosearch,1-search) :[0] : （默认是需要制定GK的IP的） Current GKIPAddr is [127.0.0.1]. (1- Change, 2- No change): [2] : 1
Please input GK_IPAddr :192.216.2.22（GK的IP）
Please input GKRASPORT(1-65535) :[1719] : （GK的注册端口） Please input GKID[]:gohigh_mg3000（GK的ID）
Please input RasRegistertimeout(60-180) :[60] : （注册消息的超时时间） Please input MaxRetries(1-60) :[2] : （注册消息的重传次数）
Please input RasPort( 0-auto assigned,(1-65535)-manual assigned ) :[0] （本端端口是自动指定的）: Please input GatewayRegType (0-E164,1-H323_ID,2-E164&H323_ID) :[0] : （注册类型） To apply modified value to system you must reboot!! The command has been completed successfully!
DisplayRasParam 命令用来显示RAS参数设置，例如： MG3000-T4:\\H323> dras
Current the CallsRegStyle is [GK].
Current the type of GKDiscovery is [nosearch]. Current GKIPAddr is [192.216.2.22]. Current GKIPPort is [1719]. Current GKID is [gohigh_mg3000]. Current RasRegisterTimeout is [60]. Current maxRetries is [2]. Current rasPort is AUTO assigned.
Current the type of GatewayRegistrationType is [E164]. The command has been completed successfully!
GoHigh http://www.gohigh.com.cn 15
DTGH-D-043-MG3000-T4-串口控制台使用手册
4.3 配置目的H.225协议端口
该命令用于配置Q931协议参数。说明如下： MG3000-T4:\\H323> cq931
Please input H225Port(1-65535) :[1720] : The command has been completed successfully!
4.4 注册前缀的操作
ap命令用于添加一条注册前缀信息。例如： MG3000-T4:\\H323> ap 1111
To apply modified value to system you must reboot!! The command has been completed successfully! DisplayRegistePrefix命令用于显示注册前缀信息。
RemoveRegistePrefix命令用于删除一条注册前缀信息。例如： MG3000-T4:\\H323> rp 1111
To apply modified value to system you must reboot!! The command has been completed successfully! 注意：增加或者删除前缀是需要重启设备的。
4.5 删除H323Id配置
DelH323Id命令用于删除H323Id配置。例如： MG3000-T4:\\H323> delh323id
To apply modified value to system you must reboot!! The command has been completed successfully!
4.6 删除GkId配置
DelGkId命令用于删除GkId配置。例如： MG3000-T4:\\H323> delgkid
To apply modified value to system you must reboot!! The command has been completed successfully!
GoHigh http://www.gohigh.com.cn 16
DTGH-D-043-MG3000-T4-串口控制台使用手册
5 SIP协议的配置
MG3000-T4中继媒体网关控制台提供用户对SIP协议的配置，主要包括是否注册，以及端口等相关配置等。
5.1 配置SIP协议使用的定时器
可以修改定时器的超时时间和重传次数，这个会影响发送消息的间隔和数量，例如： MG3000-T4:\\SIP> ct T1 (500 - 1000) [500] : T2 (4000 - 10000) [4000] :
200-wait-ack (5000 - 10000) [5000] : ack-wait-200 (16000 - 20000) [16000] : 100-wait-200 (180000 - 200000) [180000] : no-response (32000 - 60000) [32000] : The command has been completed successfully! MG3000-T4:\\SIP> MG3000-T4:\\SIP> cr retry times of 'bye' (1-11)[11] : retry times of 'cancel' (1-11)[11] : retry times of 'invite' (1-11)[7] : retry times of 'finalresponse' (1-11)[7] : retry times of 'Nofinalresponse' (1-11)[7] : retry times of 'prack' (1-11)[7] :
The command has been completed successfully!
5.2 配置SIP协议端口
配置本端协议使用的端口，这个值修改之后要重启才能生效，例如： MG3000-T4:\\SIP> lpp
local SIP protocol port is :[5060] :
The command has been completed successfully!
5.3 配置SIP协议是否发送183消息
MG3000-T4:\\SIP> c183 183 switch:(0-off, 1-on):[1] :
The command has been completed successfully!
5.4 注册和认证相关配置
关于注册有几个相关的命令，包括是否使用注册功能、注册的ID、注册服务器的IP和认证ID和密码等。
是否使用注册功能，例如： MG3000-T4:\\SIP> rof
sip register is NOT running!
GoHigh http://www.gohigh.com.cn 17
DTGH-D-043-MG3000-T4-串口控制台使用手册
Enable or Disable TG register?(0-disable,1-enable):1 The command has been completed successfully!
配置注册服务器的IP地址，例如： MG3000-T4:\\SIP> crs
Register server 1 IP addr:192.216.2.45 Register server 1 Port:[5060] : Register server 2 IP addr:192.216.2.46 Register server 2 Port:[5060] :
The command has been completed successfully! 配置注册用的ID，例如： MG3000-T4:\\SIP> cri Current user id is: 00000000 (1- Change, 2- No change): 1 User name:123（修改成123）
The command has been completed successfully! 配置注册认证使用的ID和密码。例如： MG3000-T4:\\SIP> caui Current user id is: 00000000 (1- Change, 2- No change): 1 User name:123
The command has been completed successfully!
MG3000-T4:\\SIP> capd
Do you want to change your password? (1- Change, 2- No change): 1 New password:* Re-enter new password:*
The command has been completed successfully! MG3000-T4:\\SIP>
GoHigh http://www.gohigh.com.cn 18
DTGH-D-043-MG3000-T4-串口控制台使用手册
6 SS7的配置
MG3000-T4中继媒体网关工作在7号信令模式下时，需要配置SS7。
6.1 配置级联模式
可以设置为不级联、级联时作为主设备或从设备。设为主设备后，需要设备TCP端口号及从设备IP地址。设为从设备后，需要设置主设备的IP地址和端口号。修改级联模式后需要保存重启设备，修改主从IP地址或端口号后无需重启。dcp命令用于显示配置及连接状态。
MG3000-T4:\\PSTN> ccp
Please input cascade mode(0 -- do not cascade, 1 -- master, 2 -- slave) [0] : 1 Please input TCP port for connection with slave devices [4000] :
Please input slave device 1 ipaddr [0] (0 means not existing): 192.216.3.188 Please input slave device 2 ipaddr [0] (0 means not existing): Please input slave device 3 ipaddr [0] (0 means not existing): You have to save and restart to make it valid! The command has been completed successfully!
MG3000-T4:\\PSTN> dcp SS7 cascade mode : Master
TCP port for connection with slave devices : 4000 Slave device 1 IP : 192.216.3.188 Connected Slave device 2 IP : Slave device 3 IP :
The command has been completed successfully!
6.2 配置MTP2使用的定时器
可以修改MTP2定时器的超时时间，会影响链路建立时发送消息的间隔，例如： MG3000-T4:\\PSTN> mtp2 Please input operation
1 -- set MTP2 timer value
GoHigh http://www.gohigh.com.cn 19