Sccp
Reroute Reject cause value (octet 2) Bits 8 7 6 5 4 3 2 1 0 0 0 0 0 0 0 0 Reserved “ “ 0 0 0 0 1 0 1 0 Reserved 0 0 0 0 1 0 1 1 PLMN not allowed (meaning is defined in [6]) 0 0 0 0 1 1 0 0 location area not allowed (meaning is defined in [6]) 0 0 0 0 1 1 0 1 roaming not allowed in this location area (meaning is defined in [6]) 0 0 0 0 1 1 1 0 GPRS services not allowed in this PLMN (meaning is defined in [6]) 0 0 0 0 1 1 1 1 no suitable cell in location area (meaning is defined in [6]) 0 0 0 1 0 0 0 0 CS/PS domain registration coordination required (meaning defined in [51]) 0 0 0 1 0 0 0 1 Reserved “ “ 1 1 1 1 1 1 1 1 Reserved RR
RR cause value (octet 2) Bits
8 7 6 5 4 3 2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 1 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 1 1 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 1 0 1 0 0 0 0 0 1 0 1 1 0 0 0 0 1 1 0 0 0 1 0 0 0 0 0 1 0 1 0 1 1 1 1 1 0 1 1 0 0 0 0 0 0 1 1 0 0 0 0 1 0 1 1 0 0 0 1 0 0 1 1 0 0 1 0 0 0 1 1 0 0 1 0 1 0 1 1 0 1 1 1 1
All other cause values shall be treated as 0000 0000, 'normal event'
The listed RR cause values are defined in Annex F.
Normal event
Abnormal release, unspecified
Abnormal release, channel unacceptable Abnormal release, timer expired
Abnormal release, no activity on the radio path Preemptive release
UTRAN configuration unknown
Handover impossible, timing advance out of range Channel mode unacceptable Frequency not implemented
Originator or talker leaving group call area Lower layer failure Call already cleared
Semantically incorrect message Invalid mandatory information
Message type non-existent or not implemented Message type not compatible with protocol state Conditional IE error
No cell allocation available Protocol error unspecified
MM
Reject cause value (octet 2) Bits 8 7 6 5 4 3 2 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 1 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 1 1 0 0 0 0 0 1 0 1 1 0 0 0 0 1 1 0 0 0 0 0 0 1 1 0 1 0 0 0 0 1 1 1 1 0 0 0 1 0 0 0 1 0 0 0 1 0 1 0 0 0 0 0 1 0 1 0 1 0 0 0 1 0 1 1 0 0 0 0 1 0 1 1 1 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 1 0 0 0 1 0 0 0 1 0 0 1 1 0 0 0 1 1 0 0 0 0 to 0 0 1 1 1 1 1 1 0 1 0 1 1 1 1 1 0 1 1 0 0 0 0 0 0 1 1 0 0 0 0 1 0 1 1 0 0 0 1 0 0 1 1 0 0 0 1 1 0 1 1 0 0 1 0 0 0 1 1 0 0 1 0 1 0 1 1 0 1 1 1 1 IMSI unknown in HLR Illegal MS IMSI unknown in VLR IMEI not accepted Illegal ME PLMN not allowed Location Area not allowed Roaming not allowed in this location area No Suitable Cells In Location Area Network failure MAC failure Synch failure Congestion GSM authentication unacceptable Service option not supported Requested service option not subscribed Service option temporarily out of order Call cannot be identified } } retry upon entry into a new cell } Semantically incorrect message Invalid mandatory information Message type non-existent or not implemented Message type not compatible with the protocol state Information element non-existent or not implemented Conditional IE error Message not compatible with the protocol state Protocol error, unspecified Any other value received by the mobile station shall be treated as 0010 0010, 'Service option temporarily out of order'. Any other value received by the network shall be treated as 0110 1111, 'Protocol error, unspecified'.
NOTE: The listed reject cause values are defined in Annex G. CC
Cause value Class Value Cause num. Cause Diag- nostic Remarks 7 6 5 4 3 2 1 0 0 0 0 0 0 1 0 0 0 0 0 1 1 0 0 0 0 1 1 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 1 0 0 1 0 0 1 0 0 0 1 0 0 1 1 0 0 1 0 1 0 1 0 0 1 0 1 1 0 0 0 1 1 0 0 1 0 0 1 1 0 1 0 0 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 1 0 1 0 0 1 1 1 1 0 0 0 1 1 1 1 1 0 1 0 0 0 1 0 0 1 0 0 1 1 0 0 1 0 1 0 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 1 0 1 0 1 1 0 0 0 1 0 1 1 1 1 0 1 1 0 0 0 1 0 1 1 0 0 1 0 0 1 1 0 1 1 1 0 1 1 1 0 0 1 0 1 1 1 0 1 0 0 1 1 1 1 1 1 1 0 0 0 0 0 1
1. Unassigned (unallocated) number Note 9 3. No route to destination Note 9 6. Channel unacceptable - 8. Operator determined barring - 16. Normal call clearing Note 9 17. User busy Note 1 18. No user responding - 19. User alerting, no answer - 21. Call rejected Note 9 - user supplied diagnostic (note 4) 22. Number changed New destination(note 5) 25. Pre-emption 26. Non selected user clearing - 27. Destination out of order - 28. Invalid number format (incomplete - number) 29. Facility rejected Note 1 30. Response to STATUS ENQUIRY - 31. Normal, unspecified - 34. No circuit/channel available Note 1 38. Network out of order - 41. Temporary failure - 42. Switching equipment congestion - 43. Access information discarded Discarded information element identifiers (note 6) 44. requested circuit/channel not available - 47. Resources unavailable, unspecified - 49. Quality of service unavailable Note 9 50. Requested facility not subscribed Note 1 55. Incoming calls barred within the CUG Note 1 57. Bearer capability not authorized Note 3 58. Bearer capability not presently available Note 3 63. Service or option not available, - unspecified 65. Bearer service not implemented Note 3 (continued) Table 10.5.123/3GPP TS 24.008 (concluded): Cause information element values
Cause value Class Value 7 6 5 4 3 2 1 1 0 0 0 1 0 0 1 0 0 0 1 0 1 1 0 0 0 1 1 0 1 0 0 1 1 1 1 1 0 1 0 0 0 1 1 0 1 0 1 1 1 1 0 1 1 0 0 0 1 0 1 1 0 1 1 1 0 1 1 1 1 1 1 1 0 0 0 0 0 1 1 0 0 0 0 1 1 1 0 0 0 1 0 1 1 0 0 0 1 1 1 1 0 0 1 0 0 1 1 0 0 1 0 1 1 1 0 0 1 1 0 1 1 0 1 1 1 1 1 1 1 1 1 1 1 Cause num. 68. 69. 70. 79. 81. 87. 88. 91. 95. 96. 97. 98. 99. 100. 101. 102. 111. 127. ACM equal to or greater than ACMmax Requested facility not implemented Only restricted digital information bearer capability is available Service or option not implemented, unspecified Invalid transaction identifier value User not member of CUG Incompatible destination Invalid transit network selection Semantically incorrect message Invalid mandatory information Message type non-existent or not implemented Message type not compatible with protocol state Information element non-existent or not implemented Conditional IE error Message not compatible with protocol state Recovery on timer expiry Protocol error, unspecified Interworking, unspecified Timer number (note 8) - - Information element identifier(s) (notes 6,7) Information element identifier(s) (note 6) Message type Message type - Note 1 (Note 2) - - identifier(s) Message type - Cause Diag- nostic Note 1 Remarks Incompatible parameter Information element