ISUP信令消息参数(2)

2019-03-03 17:57

2 接入转送Access transport

00000011 接入转送

1 . n

8 7 6 5 4 03 3 2 1 Information element(s) /消息单元 Figure 5/Q.763 –Access transport parameter field 消息单元的编码见 Q.931/$4.5

3自动拥塞级Automatic congestion level

00100111 27 自动拥塞级

8 7 6 5 4 Automatic congestion level 自动拥塞级 3 2 1 Figure 6/Q.763 –自动拥塞级参数字段 Bit 8-1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 1?? to ? 1 1 1 1 1 1 1 1??

Spare Congestion level 1 exceeded Congestion level 2 exceeded Spare 备用 超过拥塞级1 超过拥塞级 2 备用 4 后向呼叫表示语Backward call indicators

00010001 后向呼叫表示语

1 2

8 H P 7 G O 6 F N 5 E M 4 D L 11 3 C K 2 B J 1 A I Figure 7/Q.763 –后向呼叫表示语参数字段

Bits BA 0 0 0 1 1 0 1 1 Bits DC 0 0 0 1 1 0 1 1 Bits FE 0 0 0 1 1 0 1 1 Bits HG 0 0 0 1 1 0 1 0 Bit I 0 1 Bit J 0 1 Charge indicator (Note 1) no indication no charge charge spare Called party's status indicator no indication subscriber free connect when free (national use) spare Called party's category indicator no indication ordinary subscriber payphone spare End-to-end method indicator (Note 2) no end-to-end method available (only link-by-link method available) pass-along method available (national use) SCCP method available pass-along and SCCP methods available (national use) Interworking indicator (Note 2) no interworking encountered (Signalling System No. 7 all the way) interworking encountered End-to-end information indicator (Note 2) (national use) no end-to-end information available end-to-end information available 计费表示语 无指示 不计费 计费 备用 被叫用户状态表示语 无指示 用户空 空时连接 备用 被叫用户类别表示语 无指示 普通用户 付费电话 备用 端到端方式表示语 端到端方式不可用(只有逐段转发方式可用) 传递方式可用 SCCP 方式可用 传递方式和SCCP方式可用 互通表示语 未遇到互通 遇到互通 端到端消息表示语 无端到端消息可用 端到端消息可用 bit K 0 1 bit L 0 1 bit M 0 1 bit N 0 1 bits PO ISDN user part indicator (Note 2) ISDN user part not used all the way ISDN user part used all the way Holding indicator (national use) holding not requested holding requested ISDN access indicator terminating access non-ISDN terminating access ISDN Echo control device indicator incoming echo control device not included incoming echo control device included ISDN用户部分表示语 不是所有方向都使用ISUP 所有方向都使用ISUP 保持表示语 未请求保持 请求保持 ISDN接入表示语 终端接入非ISDN 终端接入ISDN 回声控制装置表示语 未包括来话回声控制装置 包括来话回声控制装置 SCCP method indicator (Note SCCP方式表示语 2) 0 0 no indication 无指示 0 1 connectionless method 无连接方式可用 available (national use) 1 0 connection oriented method 面向连接方式可用 available 1 1 connectionless and connection 无连接和面向连接方式可用 oriented methods available (national use) Bits G-K and O-P constitute the protocol control indicator. 比特G-K 和 O-P组成协议控制表示语

5呼叫变更消息 Call diversion information

00110110 呼叫变更消息

8 H 7 G 6 F 5 E 4 D 3 C 2 B 1 A 36 Figure 8/Q.763 –呼叫变更消息 参数字段

在呼叫变更信息参数字段中使用一下编码 a) 通知预定任选 bits CBA Unknown presentation not allowed presentation allowed with redirection number presentation allowed without redirection number spare 不知道 提供不允许 提供允许,带有改发号码 提供允许,不带有改发号码 备用 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0?? to? 1 1 1??

b) Redirecting reason 改发原因 bits GFED 不知道 用户忙 无应答 无条件 在提示期间转向 转向立即应答 移动用户不可达 备用 Unknown User busy no reply unconditional deflection during alerting deflection immediate response mobile subscriber not reachable spare 0 0 0 0 0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0111?? to? 1111?? bit H

6呼叫历史消息

呼叫历史消息 Spare 备用 00101101 2D(2d)

参考传播时延计数器的参数格式

7 呼叫参数 Call reference (national use)

00000001 呼叫参数

1 2 3 4 5 6

8 7 6 5 4 3 2 1 Call identity/呼叫标识 点编码 01 Figure 9/Q.763 –呼叫参考参数字段

在呼叫参考参数字段中,各字段使用一下编码: a) b)

8 被叫用户号码 Called party number

00000100 被叫用户号码

1 2 3 . . n

8 奇/ 偶 INN 表示语 7 6 5 4 Call identity 呼叫标识

用二进制表示的编码表示分配给呼叫的识别号码 Signalling point code 信令点编码 信令点的编码,呼叫标识语该编码有关

04 3 2 1 Nature of address indicator/地址性质表示语 Numbering plan Ind./编号计划 Spare/备用 1st address signal/第1个地址信号 2nd address signal/第2个地址信号 Filler (if necessary)/填充码(如果需要) nth address signal/第n个地址信号 Figure 10/Q.763 –被叫用户号码参数字段

在被叫用户号码参数字段中,各个字段使用以下编码: a)

Odd/even indicator奇偶表示语 0 1

地址信号为偶数 地址信号为奇数


ISUP信令消息参数(2).doc 将本文的Word文档下载到电脑 下载失败或者文档不完整,请联系客服人员解决!

下一篇:1-2-3绝对值定值、最值探讨 讲义教师版

相关阅读
本类排行
× 注册会员免费下载(下载后可以自由复制和排版)

马上注册会员

注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: