ISUP信令消息参数(5)

2019-03-03 17:57

a)

for bits D C = 00 bits BA Maintenance blocking state/维护闭塞状态 0 0 transient 瞬态 0 1 spare 备用 1 0 spare 备用 1 1 unequipped未配备 bits H-E Spare 备用

for bits D C not equal to 00 bits BA Maintenance blocking state/维护闭塞状态 0 0 no blocking (active) 未闭塞(工作) 0 1 locally blocked 本地闭塞 1 0 remotely blocked 远端闭塞 1 1 locally and remotely blocked 本地和远端闭塞 bits DC Call processing state/呼叫进行状态 0 1 circuit incoming busy 入电路忙 1 0 circuit outgoing busy 出电路忙 1 1 idle 空闲 bits F E 0 0 0 1 1 0 1 1

Hardware blocking state (Note)/硬件闭塞状态 no blocking (active) 未闭塞(工作) locally blocked 本地闭塞 remotely blocked 远端闭塞

locally and remotely blocked 本地和远端闭塞

备用

b)

bits H-G Spare

注:如果比特FE编码不是00 ,则比特DC编码必须未11。

14 闭合用户群连锁编码Closed user group interlock code

00011010 闭合用户群连锁1A(1a) 编码

1 2 3 4

8 7 6 1st NI digit 3rd NI digit 5 4 3 2 2nd NI digit 4th NI digit 1 Binary code Figure 16/Q.763 –闭合用户群连锁编码参数字段

a) Network Identity (NI) (octets 1 and 2)网路标识(NI)(第1/2八位位组) 每位数字按二进制编码,表示从0到9的十进制数。

如果这个字段的第一位数字编码为0或9,则在第2个到第4个NI数字中接着式TCC(Telephony Country Code电话国家编码)。(最有效的TCC数字在第2个NI数字)。如果TCC长为一个数字或两数字,则当需要时,剩下的数字可用RPOA或网标识码插入。如果不需要第2个八位位组,则编码为全0。

第一位数字的编码不包括1或9。

如果第一位数字不是0,9,1或8,则这个字段包括DNIC(Data Network Identification Code数据网络标识码),建议X.121的规定一样。

b) Binary code (octets 3 and 4)

分配给闭合用户群的编码,由指定的ISDN或数据网管理。第3个八位位组的第8比特和第4个八位位组的第1比特分别是最高有效位和最低有效位。

15被连接的号码 Connected number

00100001 被连接的号码

1 2

8 Odd/ even Spare 7 6 5 4 3 Nature of address indicator 2 1 21 Numbering plan Ind. 2nd address signal Filler (if necessary) 3 . . n

Address Screening indicator presentation restricted indicator 1st address signal nth address signal Figure 17/Q.763 –被连接的号码参数字段

The following codes are used in the subfields of the connected number parameter field: a) Odd/even indicator: see 3.9 a). b) Nature of address indicator: see 3.10 b). c) Numbering plan indicator: see 3.9 d). d)

Address presentation restricted indicator:/地址提供限制表示语 0 0

0 1 1 0 1 1

presentation allowed presentation restricted address not available spare

允许提供

提供限制 地址不可用 备用

注:当地址不可用时,在a)b)c)中的字段编码位0。

e) f) g)

Screening indicator: see 3.10 f). Address signal: see 3.10 g). Filler: see 3.9 f).

16连接请求Connection request(国内暂时不用)

00001101 连接请求 0D(0d)

1 2 3 4 5 6 7

8 7 6 5 4 3 2 1 Local reference/本地参数 Signalling point code Protocol class/协议类别 Credit/信用量 NOTE – Octets 6 and 7 may be omitted if protocol class requested is 2.

Spare Figure 18/Q.763 –连接请求参数字段

The following codes are used in the subfields of the connection request parameter field: a) b) c) d)

17导通表示语Continuity indicators

00010000 导通表示语

8 H 7 G 6 F 5 E 4 D 3 C 2 B 1 A Local reference-本地参考

表明本地参考的编码,由信号连接控制部分分配给端到端的连接 Signalling point code-点编码

识别信号点的编码,连接请求在该点产生 Protocol class-协议类别

按二进制表示识别的编码,表示端到端连接所请求的协议类别 Credit-信用量

按二进制表示识别的编码,表示端到端连接所请求的窗口大小。

10 Figure 19/Q.763 –导通表示语参数字段

bit A 0 1 bits H-B

Continuity indicator-导通表示语 continuity check failed 导通检验失败 continuity check successful 导通检验成功 Spare

备用

18 回声控制消息Echo control information

00110111 回声控制消息

8 H 7 G 6 F 5 E 4 D 37 3 C 2 B 1 A Figure 20/Q.763 –回声控制消息参数字段

a)

bits

BA Outgoing echo control device information indicator-去话回声控制响应表示语

0 0 No information 无信息

0 1 Outgoing echo control device not included and not available

未包括去话半回声控制装置 1 0 Outgoing echo control device included

包括去话半回声控制装置 1 1 Spare 备用(国内) bits

DC Incoming echo control device information indicator-来话回声控制响应表示语 0 0 0 1 1 0

No information 无信息

Incoming echo control device not included and not available 未包括来话半回声控制装置 Incoming echo control device included 包括来话半回声控制装置

b)

c)

1 1 Spare 备用(国内) bits

FE Outgoing echo control device request indicator-去话回声控制请求表示语 0 0 0 1

No information 无信息 Outgoing echo control device activation request 去话半回声控制装置激活请求

1 0 1 1

Outgoing echo control device deactivation request (Note) 去话半回声控制装置去活请求 Spare 备用

d)

bits

HG Incoming echo control device request indicator-来话回声控制请求表示语 0 0 0 1 1 0 1 1

No information

Incoming echo control device activation request 来话话半回声控制装置激活请求

Incoming echo control device deactivation request (Note) 来话半回声控制装置去活请求 Spare 备用

19 任选参数结束

任选参数结束

00000000 00 20 事件消息Event information

00100100 事件消息

8 H 7 G 6 F 5 E 4 D 24 3 C 2 B 1 A Figure 21/Q.763 –事件消息参数字段

bits GFEDCBA 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0 1 1 0 0 0 0 1 0 0 0 0 0 0 1 0 1 Event indicator spare ALERTING PROGRESS in-band information or an appropriate pattern is now available call forwarded on busy (national use) call forwarded on no reply (national use) 事件表示语 备用 提示 进展 带内消息或适当的码型现在可用 遇忙呼叫前向转移 无应答呼叫前向转移


ISUP信令消息参数(5).doc 将本文的Word文档下载到电脑 下载失败或者文档不完整,请联系客服人员解决!

下一篇:1-2-3绝对值定值、最值探讨 讲义教师版

相关阅读
本类排行
× 注册会员免费下载(下载后可以自由复制和排版)

马上注册会员

注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: