alarm_ioin_level alarm_iolinkage alarm_ioout_level alarm_mail alarm_upload_interval alarm_schedule_enable alarm_schedule_sun_0 alarm_schedule_sun_1 alarm_schedule_sun_2 alarm_schedule_mon_0 alarm_schedule_mon_1 alarm_schedule_mon_2 alarm_schedule_tue_0 alarm_schedule_tue_1 alarm_schedule_tue_2 alarm_schedule_wed_0 alarm_schedule_wed_1 alarm_schedule_wed_2 alarm_schedule_thu_0 alarm_schedule_thu_1 alarm_schedule_thu_2 alarm_schedule_fri_0 alarm_schedule_fri_1 alarm_schedule_fri_2 alarm_schedule_sat_0 alarm_schedule_sat_1 alarm_schedule_sat_2 Alarm io in level，0：low；1：high 0：disable alarm io linkage；1：enable Alarm io out level，0：low；1：high 0：disable alarm mail notification；1：enable Alarm upload interval（second），0：disable Alarm schedule enable or disable Sunday alarm schedule，24 hours per day，15 mins per hours, it is divided into 96 time period 。 Bit 0-95：0：motion detection disarmed；1：armed upgrade_firmware.cgi
Description：upgrade fireware Authority：adminstrator
Syntax：/upgrade_firmware.cgi[?user=&pwd=&next_url=]
Instruction：the CGI must be adopted to “post” ，pack the documents and send them to the ip
camera.
upgrade_htmls.cgi
Description：upgrade web page Authority：adminstrator
Syntax：/upgrade_htmls.cgi[?user=&pwd=&next_url=]
Instruction：the CGI must be adopted to “post” ，pack the documents and send them to the ip
camera.
set_alias.cgi
Description：set alias parameter Authority：adminstrator
Syntax：/set_alias.cgi?alias=[&user=&pwd=&next_url=] Parameter：
alias：length <= 20
set_datetime.cgi
Description：set date time parameter Authority：adminstrator
Syntax：/set_datetime.cgi?tz=&ntp_enable=&ntp_svr=[&now=&user=&pwd=&next_url=] Parameter：
now tz ntp_enable ntp_svr now：the seconds it goes from 1970-1-1 0:0:0 Time area：the different seconds from standard GMT 0：disable ntp；1：enable Ntp server，length <= 64 set_users.cgi
Decription：set user parameter
Authority：adminstrator Syntax：
/set_users.cgi?user1=&pwd1=&pri1=&user2=&pwd2=&pri2=&user3=&pwd3=&pri3=&user4=&pwd4=&pri4=&user5=&pwd5=&pri5=&user6=&pwd6=&pri6=&user7=&pwd7=&pri7=&user8=&pwd8=&pri8=[&user=&pwd=&next_url=] Parameter：
user1 pwd1 pri1 … user8 User 1 Name, Legenth<=12 User 1 Password, Legenth<=12 Usre 1 Authority，0：vVisitor；1：Opeartor；2：Administrador User 8 Name pwd8 pri8
User 8 Password Usre 8 Authority set_network.cgi
Description: setting equipment basic network specification Authority: Administrator
Syntax: /set_network.cgi?ip=&mask=&gateway=&dns=&port=[&user=&pwd=&next_url=] Specification
ip IP address，if leave this setting blank，it will achieve daymic IP address and will ignor the mask. Gateway, DNS etc Mask Switch Dns Server Port Number mask gateway dns port set_wifi.cgi
Description：Setting WIFI specification Authority：Admin Syntax：
/set_wifi.cgi?enable=&ssid=&encrypt=&defkey=&key1=&key2=&key3=&key4=
&authtype=&keyformat=&key1_bits=&key2_bits=&key3_bits=&key4_bits=&channel=&mode=&wpa_psk=[&user=&pwd=&next_url=] Specification：
enable ssid channel mode encrypt authtype keyformat defkey key1 0：Disable WIFI function；1：Enable Plan to add ssid of WIFI，legenth <= 40 Reserve =5 Reserve =0 0：Disable encycription；1：wep encycription；2：wpa tkip；3：wpa aes；4：wpa2 aes；5：wpa2 tkip+aes wep check mode，0：open；1：share Wep key format，0：16 Digits；1：ascii symbol Wep middle key：0-3 Wep key1，legenth <= 30 key2 key3 key4 key1_bits key2_bits key3_bits key4_bits wpa_psk Wep key1 wep key2 Wep key3 wep key1 legenth，0：64 bits；1：128 bits Wep key 2 legenth，0：64 bits；1：128 bits Wep key 3 legenth，0：64 bits；1：128 bits Wep key 4 legenth，0：64 bits；1：128 bits wpa psk key，legenth <= 64 set_pppoe.cgi
Description：Setting PPPOE Authority：Admin Syntax：
/set_pppoe.cgi?enable=&user=&pwd=&mail_ip=[&cam_user=&cam_pwd=&next_url=] Specification ：
enable user pwd 0：Disable pppoe；1：Enable Pppoe Dial user，legenth <= 64 Pppoe Dial password，legenth <= 64 set_upnp.cgi
Description：Setting UPNP Authority：Admin
Syntax：/set_upnp.cgi?enable=[&user=&pwd=&next_url=] Specification：
enable 0：Disable upnpport forwarding function；1：Enable set_ddns.cgi
Description：Setting DDNS Authority：Admin Syntax：
/set_ddns.cgi?service=&user=&pwd=&host=&proxy_svr=&proxy_port=[&restart_dyndns=&cam_user=&cam_pwd=&next_url=] Specification： Service 0：Disable ddns service 1：Oray 2：DynDns.org(dyndns) 3：DynDns.org(statdns) 4：DynDns.org(custom) 5：Reserve 6：Reserve 7：Reserve 8：3322(dyndns) 9：3322(statdns) User Pwd Host proxy_svr proxy_port restart_dyndns Ddns name，legenth <= 64 Ddns password，legenth <= 64 Ddns domain name，legenth <= 64 Agent server address（dyndns service Only can be applied in China Mainland），legenth <= 64 Agent server port number 1：Renew dyndns；0：No set_ftp.cgi
Description：Setting ftp
Authority：Admin Syntax
/set_ftp.cgi?svr=&port=&user=&pwd=&mode=&dir=&upload_interval=[&cam_user=&cam_pwd=&next_url=] Parameter：
Svr Port User Pwd Dir Mode Upload_interval Ftp server addaress，legenth <= 64 ftp server port number ftp server log in user name，legenth <= 64 ftp server log in password，legenth <= 64 ftp server storage catalog，legenth <= 64 0：portmode；1：pasv mode Breaks of Upload pictures（per second），0： disable，0-65535 set_mail.cgi
Description：Setting equipment email options Authority：Admin Syntax
/set_mail.cgi?svr=&user=&pwd=&sender=&receiver1=&receiver2=&receiver3=&receiver4