泗洪县重岗山生活垃圾及粪便无害化处理工程可行性研究报告 项目概况 第二章 项目概况
2.1 项目名称及业主单位 2.1.1 项目名称
本项目名称为：某生活垃圾及粪便无害化处理工程。 2.1.2 建设单位与主管单位
本项目的建设单位为：某有限公司。 本项目的主管单位为： 2.1.3 建设地点
建设地点：本工程位于县城新征用地约225亩。 2.2 编制依据及范围 2.2.1 编制依据
1、《XX县县城总体规划》（2004~2020年），江苏省规划设计研究院，2004年；
2、《XX县环境卫生专业规划》（2007~2020年），淮安市城市建设设计研究院有限公司，2007.11；
3、某黄砂矿场地形图，XX县规划局；
4、XX县某生活垃圾及粪便无害化处理工程地质勘察报告， 2009年1月，某市新筑艺建筑设计有限公司；
5、XX县XX垃圾填埋场场区地质调查报告，2009年3月，江苏省地质矿产调查研究所；
6、《XX县生活垃圾与粪便无害化处理项目环境影响评价报告书》及批复，2009年3月；
3
Gay is now a provincial key construction project of aluminum Ltd---province with an annual output of 50,000 tons of technical innovation project of environmental protection and energy saving of electrolytic aluminum project manager. In this technological transformation projects, he has overall responsibility for the day-to-day affairs of the project. In order to ensure that southern company's \e of investment, strengthen field management, pay special attention to project progress, and ensure a successful operation,\oal. He and Engineering Department under the leadership of all the staff in the company's technical command, on the difficulties and to overcome technical difficulties in the process, work hard, have made outstanding achievements, mainly reflected in the following aspects: first, careful organization and management achieved remarkable results. echnical innovation project of the year, started and completed a series of bids and completed to date, from production engineering to put into production after nearly a year, has achieved very significant results. A project first 56 slots from dismantling the old slot just 168 days, civil engineering, installation, commissioning, guarantee engineering quality under the premise, on the production side transformation under difficult conditions, created the national industry's fastest speeds. II 32 large prebaked electrolytic cell on November 7 has been installed, marks has an annual production capacity of 50,000 tons of electrolytic aluminum production capacity of aluminum. Entire project almost 8 months earlier than planned, achieved the goal of production transformation benefits that year, created favorable conditions for aluminum through South. Second, effectively control the investment. Project is subject to a scientific approach to bidding, bidding to make savings of 20 million Yuan, in the implementation process of the project, every domestic prices of steel, cement and other buildingmaterials, the old buildings on the base encountered great difficulties in dealing with significant increase in the volume of civil engineering, but through rationalization and optimization, project control in fixed investment of 350 million Yuan. Third, environmental energy-saving effect of the project. Project investment of nearly 30 million Yuan, using large prebake technology and aluminum oxide dense phase and hyper dense phase conveying technology, fluoride and other harmful gases purification efficiency of up to 98%. Compared with Soderberg cell before the modification, power consumpton can be reduced by 1500 tons of electrolytic aluminum, and project environmental protection and energy saving effect is obvious. Four are in a relatively short period of time to the normal production. After four months of efforts, a project has put into operation all the 54 240KA large cell into regular production, stable current channel conditions and all the economic indicators are good, current efficiency in October had reached 93%, is close to and reach the domestic advanced level. In the case of production half of the cell, this effect can be achieved and better level in the industry. 50,000 tons of electrolytic modification process, from preliminary study to equipment selection, cost control, project progress, quality control and coordination among the various sub-projects and various professional, technical command under the correct leadership, both from an overall perspective, emphasis on integrity, and earnestly implement the relevant laws and regulations, strictly act according to the contract. He tried to learn relevant knowledge, good style of business, operational and organizational coordination ability, project efficiency, quality and safety assurance system in place, with all units involved with the coordination and good ...2.2.2 编制原则
（1）贯彻执行国家关于环境保护政策，按照国家颁布的有关法规、规范及标准进行建设。
（2）工程的建设必须遵循统一规划、合理布局、因地制宜、综合开发、配套建设的原则。
（3）工程的建设采用技术先进、安全可靠、适应性强、经济合理、投资省、并与国内类似工程相一致的工艺、材料与设备。材料与设备选型应采用质量可靠、经济合理的国内外先进产品。
（4）工程设计执行《生活垃圾卫生填埋技术规范》（CJJ17-2004），《生活垃圾填埋场污染控制标准》（GB16889-2008）等国家相关规范以及某、XX地方相关规范、标准及规定。 2.2.3 编制范围
本次可行性研究报告的编制范围为XX县某生活垃圾及粪便无害化处理工程，建设内容包括：
（1）垃圾填埋库区工程，包括库区地基处理、防渗、地表水导排、渗沥液与地下水收集导排、填埋气体导排及处理、填埋作业；
（2）渗沥液处理工程：包括调节池、渗沥液处理设施； （3）粪便预处理工程：包括粪便预处理系统、上清液排放系统等；
（4）配套工程：综合管理用房、机修车间、车库、填埋作业材料堆棚、门卫、监测井、洗车场、加油站、消防水池等。
文本编制内容包括工程方案比选、推荐方案工程设计，并提出工
4
泗洪县重岗山生活垃圾及粪便无害化处理工程可行性研究报告 项目概况 程投资估算和经济评价。 2.2.4 设计规范标准
（1）《城市生活垃圾卫生填埋技术规范》（CJJ17-2004） （2）《生活垃圾填埋场污染控制标准》（GB16889-2008） （3）《生活垃圾卫生填埋场防渗系统工程技术规范》（CJJ 113-2007）
（4）《生活垃圾填埋场无害化评价标准》（CJJ/T 107-2005） （5）《生活垃圾填埋场环境监测要求》（GB/T 18772-2002） （6）《生活垃圾卫生填埋场环境监测技术标准》（CJ/T 3037） （7）《聚乙烯（PE）土工膜防渗工程技术规范》（SL/T231-98） （8）《土工合成材料应用技术规范》（GB50290-98） （9）《垃圾填埋场用高密度聚乙烯土工膜》（CJ/T234-2006） （10）《城市生活垃圾卫生填埋场运行维护技术规程》（CJJ93-2003）
（11）《城市生活垃圾卫生填埋处理工程项目建设标准》建标【2001】101号；
（12）《工业企业设计卫生标准》（GBZ1-2002） （13）《恶臭污染物排放标准》（GB14554-93） （14）《室外给水设计规范》（GB50013-2006） （15）《室外排水设计规范》（GB50014-2006） （16）《建筑给水排水设计规范》（GB50015-2003） （17）《城镇污水处理厂污染物排放标准》（GB18918-2002）
5
Gay is now a provincial key construction project of aluminum Ltd---province with an annual output of 50,000 tons of technical innovation project of environmental protection and energy saving of electrolytic aluminum project manager. In this technological transformation projects, he has overall responsibility for the day-to-day affairs of the project. In order to ensure that southern company's \e of investment, strengthen field management, pay special attention to project progress, and ensure a successful operation,\oal. He and Engineering Department under the leadership of all the staff in the company's technical command, on the difficulties and to overcome technical difficulties in the process, work hard, have made outstanding achievements, mainly reflected in the following aspects: first, careful organization and management achieved remarkable results. echnical innovation project of the year, started and completed a series of bids and completed to date, from production engineering to put into production after nearly a year, has achieved very significant results. A project first 56 slots from dismantling the old slot just 168 days, civil engineering, installation, commissioning, guarantee engineering quality under the premise, on the production side transformation under difficult conditions, created the national industry's fastest speeds. II 32 large prebaked electrolytic cell on November 7 has been installed, marks has an annual production capacity of 50,000 tons of electrolytic aluminum production capacity of aluminum. Entire project almost 8 months earlier than planned, achieved the goal of production transformation benefits that year, created favorable conditions for aluminum through South. Second, effectively control the investment. Project is subject to a scientific approach to bidding, bidding to make savings of 20 million Yuan, in the implementation process of the project, every domestic prices of steel, cement and other buildingmaterials, the old buildings on the base encountered great difficulties in dealing with significant increase in the volume of civil engineering, but through rationalization and optimization, project control in fixed investment of 350 million Yuan. Third, environmental energy-saving effect of the project. Project investment of nearly 30 million Yuan, using large prebake technology and aluminum oxide dense phase and hyper dense phase conveying technology, fluoride and other harmful gases purification efficiency of up to 98%. Compared with Soderberg cell before the modification, power consumpton can be reduced by 1500 tons of electrolytic aluminum, and project environmental protection and energy saving effect is obvious. Four are in a relatively short period of time to the normal production. After four months of efforts, a project has put into operation all the 54 240KA large cell into regular production, stable current channel conditions and all the economic indicators are good, current efficiency in October had reached 93%, is close to and reach the domestic advanced level. In the case of production half of the cell, this effect can be achieved and better level in the industry. 50,000 tons of electrolytic modification process, from preliminary study to equipment selection, cost control, project progress, quality control and coordination among the various sub-projects and various professional, technical command under the correct leadership, both from an overall perspective, emphasis on integrity, and earnestly implement the relevant laws and regulations, strictly act according to the contract. He tried to learn relevant knowledge, good style of business, operational and organizational coordination ability, project efficiency, quality and safety assurance system in place, with all units involved with the coordination and good ...（18）《民用建筑设计通则》（GB50352-2005） （19）《办公建筑设计规范》（JGJ67-2006） （20）《公共建筑节能设计标准》(GB50189-2005 ) （21）《汽车库建筑设计规范》（JGJ100-98） （22）《建筑结构荷载规范》（GB50009-2001） （23）《混凝土结构设计规范》（GB50010-2002） （24）《建筑地基基础设计规范》（GB50007-2002）
（25）《给水排水工程构筑物结构设计规范》（GB50069-2002） （26）《建筑结构可靠度设计统一标准》（GB50068-2001） （27）《建筑抗震设计规范》（GB50011-2001）（2008年版） （28）《混凝土结构设计规范》（GB50010-2002） （29）《碾压式土石坝设计规范》（SL274-2001） （30）《建筑边坡工程技术规范》（GB50330-2002） （31）《工程建设标准强制性条文》（城市建设部分） （32）《砌体结构设计规范》（GB 50003-2001） （33）《砌体工程施工质量验收规范》（GB 50203-2002） （34）《建筑设计防火规范》（GB50016-2006）
（35）《建筑内部装修设计防火规范》（GB50222-95，2001年版） （36）《采暖通风与空气调节设计规范》（GB50019-2003） （37）《夏热冬冷地区建筑节能设计标准》（JGJ134-2001） （38）《城市防洪工程设计规范》（CJJ50-92） （39）《防洪标准》（GB 50201-94）
6
泗洪县重岗山生活垃圾及粪便无害化处理工程可行性研究报告 项目概况 （40）《建筑物防雷设计规范》 （GB50057-94）（2004年版） （41）《火灾自动报警系统设计规范》（GB50116-98） （42）《建筑灭火器配置设计规范》（GBJ140-2005）
（43）《低倍数泡沫灭火系统设计规范》（GB50151-92）（2001年版）
（44）《供配电系统设计规范》（GB50052-95） （45）《低压配电设计规范》（GB50054-95）
（46）《工业自动化仪表工程施工及验收规范》（GB50093-2002） （47）《自动化仪表工程施工质量验收规范》（GB50131-2007） （48）《仪表系统接地设计规定》（HG/T20513-2000） （49）《仪表供电设计规定》（HG/T20509-2000） （50）《仪表配管、配线设计规定》（HG/T20512－2000） （51）《厂矿道路设计规范》（GBJ22-87） （52）《公路路基设计规范》（JTG D30-2004）
（53）《公路水泥混凝土路面设计规范》（JTGD40-2002） （54）《生产过程安全卫生要求总则》（GB12801-91） （55）《市容环境卫生术语标准》（CJJ/T65-2004） （56）《城市环境卫生设施规划规范》（GB 50337—2003） （57）《城镇环境卫生设施设置标准》（CJJ 27—2005 ） （58）《城市粪便处理厂（场）设计规范》（CJJ64－95） （59）《城市粪便处理厂运行、维护及其安全技术规程》（CJJ/T30-1999）
7