a 'Journal Publishing Agreement' form or a link to the online version of this agreement. Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions). If excerpts from other
copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details you are referred to:
Role of the funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such involvement then this should be stated. Please see
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please visit
Language and language services
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission please visit
Submission
Submission to this journal proceeds totally online. Use the following guidelines to prepare your article. Via the homepage of this journal (
http://ees.elsevier.com/hazmat/) you will be guided
stepwise through the creation and uploading of the various files. The system automatically converts source files to a single Adobe Acrobat PDF version of the article, which is used in the
http://www.elsevier.com/languageediting or our customer
support site at http://www.elsevier.com/clickout/EPsupport for more information.
http://www.elsevier.com/fundingbodies.
http://www.elsevier.com/funding.
http://www.elsevier.com/authorsrights.
http://www.elsevier.com/permissions.
peer-review process. Please note that even though manuscript source files are converted to PDF at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail and via the author's homepage, removing the need for a hard-copy paper trail.
Manuscripts must conform to the following guidelines for revised manuscripts or they will be rejected.
Should Authors be requested by the Editor to revise their submission, the revised version should be submitted within two months. Please note that revised manuscripts will be sent out for review because revising a manuscript does not automatically mean it will be accepted for publication.
In the revision letter, authors must transcribe each reviewer's comments into the letter, followed by the author's responses. Any associated changes in the manuscript (including page and line number) must be copied down in the revision letter. This will help the Editor compare the reviewer comments with both the replies and the changes made in the manuscript. The replies to the reviewers' comments must also be reflected in the revised manuscript wherever possible (not just in the revision letter). Authors must give clear reasons if they choose not to make changes according to the reviewer suggestions. In the revised manuscript, authors must indicate how the manuscript was changed according to the reviewer comments by highlighting the revisions (all new text/data/figures) with colour. Only one final revised version the manuscript must be uploaded.
Authors must provide the original manuscript number, the name of the original handling Editor, and state whether the revised manuscript is a resubmission of a rejected manuscript both in EES and in the cover letter in order to ensure that it is assigned to the original handling Editor.
Upon resubmission of a rejected manuscript, Authors will be required to upload the decision letter from the Editor requesting submission of the rejected manuscript, the original Reviewer comments of the rejected manuscript, the responses to the Reviewer comments, and the original manuscript number. The resubmitted manuscript must indicate, in color, where the revisions were made in the paper in response to the Reviewer comments.
Please be aware that manuscripts rejected for \be accepted as a resubmission.
Use of wordprocessing software
It is important that the file be saved in the native format of the wordprocessor used. The text
should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed \prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication). Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the \\
Article structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to \be given a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Experimental
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on.
Essential title page information
Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author. Corresponding author. Clearly indicate who is willing to handle correspondence at all stages of refereeing and publication, also post-publication. The submitting author and the
corresponding author must be the same person. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a \as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required (100-200 words). The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, they must be cited in full, without reference to the reference list. Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
Graphical abstract
A Graphical abstract is optional and should summarize the contents of the paper in a concise, pictorial form designed to capture the attention of a wide readership online. Authors must provide images that clearly represent the work described in the paper. Graphical abstracts should be submitted as a separate file in the online submission system. Maximum image size: 400 × 600 pixels (h × w, recommended size 200 × 500 pixels). Preferred file types: TIFF, EPS, PDF or MS Office files. See
Research highlights
Research highlights are a short collection of bullet points that convey the core findings of the
http://www.elsevier.com/graphicalabstracts for examples.
article. Research highlights are optional and should be submitted in a separate file in the online submission system. Please use 'Research highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters per bullet point including spaces). See http://www.elsevier.com/researchhighlights for examples.
Keywords
Immediately after the abstract, provide a maximum of 5 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, \sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Nomenclature and units
Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI. You are urged to consult the International Union of Pure and Applied Chemistry (IUPAC) information.
Footnotes
Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list. Table footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
http://www.iupac.org/ for further