5.1.3 Input – Function
Key Sequence
M – 1 – 1 – 2 Input S7
Short Key
In Figure 5-5 you can see the display of function Input. A – 00 IDL ST ] [ ] [ ins es dw DFC The first row display the Software Status (see: 5.1.1).
Figure 5-5:Input – Function
The second row monitors the System Inputs
- Lower case letters of the input name stands for ?Function = OFF? and upper case letters for ?function = ON?
- Up to four signals are displayed in one row .you can skip to the next / previous group with Key GOON / GOBACK.
- Each group is assigned to a functional block. Both can be displayed with Shift Key ENTER. Please refer to the list of available System Inputs. (see document: Service Tool Reference List)
goon - Key GOON / Shift Key GOBACK: goon Skip to the next / previous group of the System Inputs. (GOBACK) A – 00 IDL ST ] [ ] [ md aes - Shift Key UP / Shift Key DOWN: 2 3
(UP) (DOWN) Block :System Group 1 :Safety Chain
SY1 Safety Chain
ins es dw DFC
5.1.4 Output - Function
Key Sequence
M – 1 – 1 - 4 In Figure 5-7 and 5-8 you can see the display of Function Group.
The first row displays the Software Status. of the Controller the Service Tool is connected with.
A – 00 IDL ST ] [ ] [ B – 03 IDL ST ] [ ] [ Figure 5-7:Group – Function
A – 00 IDL ST ] [ ] [ *** *** *** *** The second row displays the Software Status of one of the other Controllers in the group. (see :5.1.1 Software Status)
Figure 5-8:Group - Function (Simplex) goon - Key GOON / Shift Key GOBACK: Skip to the next / previous Controller in the group. A – 00 IDL ST ] [ ] [ C – 07 IDL ST ] [ ] [ goon (GOBACK) 5.1.5 Group – Function
Key Sequence M- 1 – 1 – 4
In Figure 5 – 7 and 5 – 8 you can see the display of function Group.
The first row displays the Software Status. of the con- troller the Service Tool is connected with.
B – 03 IDL ST ] [ ] [ A – 00 IDL ST ] [ ] [
A – 00 IDL ST ] [ ] [
* * * * * * * * * * * * *
Figure 5-8: Group – Function (Simplex)
goon - Key GOON / Shift Key GOBACK: goon Skip to the next / previous Controller in the group.
(GOBACK)
A – 00 IDL ST ] [ ] [
C – 07 IDL ST ] [ ] [
Figure 5-7: Group – Function The second row displays the Software Status of one of the other Controllers in the group. (see: 5.1.1 Software Status)
5.1.6 ICSS - Function
Key Sequence
M– 1 – 1 - 5 ICSS IS ONLINE ICSS2 IS OFFLINE In Figure 5-9 you can see the display of function ICSS.
The first row displays the status of first ICSS. The second row displays the status of the second ICSS. Figure 5-9 : ICSS - Function
5.1.7 Command – Function
goon
Key Sequence
M – 1 – 1 - 6 The first row displays the Software Status (see : 5.5.1)
The second row displays the Commands which are send to the internal Subsystems.
(see document : Service Tool Reference List / Commands)
A – 00 IDL ST ] [ ] [ F : CLD1 R : CLD1 goon (GOBACK) - Key GOON / Shift Key GOBACK: Skip to the next / previous group of commands A – 00 IDL ST ] [ ] [ MC: GoTo To : 00 1) Display Field 1) 2)CLD1 3)CLD2
Discription Software Status command for front door command for rear door A – 00 IDL ST ] [ ] [ F : CLD1 R : CLD2 2) 3) 1) Display Field 1) 2) GoTo 3) 00
Discription
Software Status Motion command
Actual Target (**=invalid)
Au00 NOR FR ] [ ] [ MC : GoTo To : 00 2) 3)