© 2006 Zetex Semiconductors plc
4
As is often the case in life the non-linear response of the thermistor has the least sensitivity in the area you wish it to be most responsive. The change in resistance is more dramatic at lower temperatures than the higher temperatures. As a guide, the higher the ß value, the faster is the roll off of resistance with increasing temperature. This is illustrated in Figure 2. The response can be made more linear by paralleling a suitable resistor with the
thermistor.
Fig 2 - Typical change in thermistor resistance with temperature.
Positioning of the temperature sensor is also very important, as it needs to be as close as possible to the die of the LED to avoid thermal gradients and response delay as the LED heats up.
Referring back to Figure 1, it is evident that consideration must be given to lower temperatures. If the thermistor is used in a control circuit that reduces the current as temperature increases it may also increase the current when temperature decreases. This may cause transient overheating of the LED and take the junction temperature beyond its rated value. Self heating will self correct but the implied thermal stress is undesirable. It is better to include a clamping configuration to ensure the current does not continue to increase as temperature decreases.