CNC Router User Mannual
version 3.2
www.fmuser.com
第 1 页 共 22 页
Thank you very much for your selection of TS series engraving machine east, TS series engraving machine is east of electronic production of high quality, multi-function carving machines, is widely used in the handicraft, anaglyph, badges, medal, model, PCB drilling sculpture, biological experiment, etc
The machine adopts high-grade aluminium processing, and adopts imported precision ball screw machining accuracy can be guaranteed. This manual is TS series small engraving machine manual
This handbook provides users installation and operation parameters Settings, abnormal diagnosis and maintenance and safe use of related matters. In order to guarantee the normal installation and operation this series engraving machine products, please use TS series engraving machine, be sure to read carefully before this handbook. This manual is random send attachments, please use appropriate is custodial, to prepare for future use.
If still exist in use process can not solve the difficult problem of this unit, please contact with dealers or direct contact our customer service center.
The contents of this manual data are subject to change without notice.
Eye
The first chapter: safety precautions and inspection Chapter 2: engraving machine installation and process Chapter 3: control software installation Chapter 4: auxiliary software installation Chapter 5: interface
Chapter 6: beginner learning methods Chapter 7: attention Chapter 8: shortcuts list Chapter 9: common fault
Chapter 10: maintenance and maintenance Chapter 11: each type machine motor parameters Chapter 12: appendix 1 - tools selection Chapter 12: appendix 2 - ARTCAM profile
Chapter 13: appendix 3 - wen tai engraving system application
The first chapter of safety precautions and inspection
1.1 safety precautions
Responding to be installed in the gas containing the explosive environment,
www.fmuser.com
第 2 页 共 22 页
otherwise have caused the explosion danger
Responding to confirm the input power is completely disconnect circumstances, can the attachment plug and play, otherwise it may cause controller failure
Responding to this device in the circuit and its components, please contact with internal risk of electric shock, otherwise there.
When using the controller interface adopts power grounding terminal center on the basis of the national electrical safety, please regulations and other relevant standards and reliable grounding.
In responding to shut off the power switch indicator, after 5 minutes, do not touch any parts within the controller boards and utility, which involves part can be confirmed after discharge, or have built-in electric shock risk.
Responding to please screw gaskets and conductive into such foreign or internal controller and the danger of fire damage controller
Responding to start if burning fuse, please confirm the internal and external fittings of short-circuit without changing the same specification after electrify. Fuse
Under the state adopts controller power open not inserted output, otherwise it may damage the circuit inside the controller
Don't be placed in the second-ranking controller can rain or sunshine point-blank, otherwise have damaged the controller
After the open-package inspection 1.2
Dong da electric TS series engraving machine factory has undergo strict testing and quality inspection. After buy, please check whether the packing of the products for transportation and damage, check the immodesty related accessories are complete.
Responding to annex: see attached list
Responding to such as are found, please contact the electric equipment of or dealers.
The second chapter engraving machine installation and machining process 2.1 using environment
Had no corrosive gas, steam and dust
Responding to 20% ~ 90% environment humidity scope, condensation Responding to vibration than 5.8 m/s2 (0.6 g), Responding to no interference sources
Responding to environmental temperature range - 10 ° C ~ 50 ° C
Responding to ban in gas and liquid inflammable, explosive or dangerous environment using solid
www.fmuser.com
第 3 页 共 22 页
With 2.2 process machine movement coordinates
www.fmuser.com
第 4 页 共 22 页
Chapter 3: software installation Software and 3.1
Note: the software installation process ARTCAM except installation process choose language by default installation other outside! After the completion of the software installation must restart the computer!
After the installation is complete in desktop ICONS, you can generate a few only
retains the following several ICONS
3.2 software profile
---- Professional computer-aided mapping software
----- The software (graphics, text, anaglyph, tool path editor),
Note: the tool path to preserve the format selection G Code (mm) (tap)
------ Sculpture software (carving machine control software).
3.3 software installation
1, will enter into the drive disc, MACH directory, and double-click. “NO.1” MACH software installation,the diagram below the window
www.fmuser.com
第 5 页 共 22 页