Chapter 5: control software interface
Desktop ICONS
5.1 software interface. Complete,The software of the screen has seven main interface
A display area code, * * * * * b, specific axial location
* c, dao and track display (or mouse made corresponding operation), * d, code execution control button
* e, emergency stop button - open software must point it (green) not flashing
Software can only be used (shortcut key \
* g, spindle manual control (open/close) shortcuts F5, Can add speed, incremental place, can according to click on 10 thousand
* h, feeding rate adjustment (shortcuts F11 F10),
* 5.2 manual control shortcut key direction (page, page down arrow), manual speed shortcuts:\
* 5.3 procedure manual function interface
www.fmuser.com
第 11 页 共 22 页
In the program under the condition free press the keyboard Tab keys can open manual functions,interface as follows
The sixth chapter novice learning methods 6.1 study method
First, please understand operating machine software and operation method of the related machines, don't blindly run again after running!
Learning to operate machines can not installed with drawing tools and methods: (words) will be a ballpoint pen with elastic fixed in the Z axis (or above) running program axis, so that can assure safety and can learn the basic operation of the machine, the process will please spindle motor out plug, to ensure the safety of you!
Basic tools can be installed after the master, try try using a soft material carving as possible, lest because the material carving machine or improper operation and broken sword
Very sharp knives, please must pay attention to safety!
The basic motion. 6.2
First open the control software to open controller power
www.fmuser.com
第 12 页 共 22 页
Closed emergency stop (state) if the red and green evergreen interval is launched stop flashing, cannot use any function
Use the keyboard, check each shaft manually controlled movement direction correctly, the direction key should be consistent with the tools, key direction upward movement, DOWN keys downward motion
Note: the axial direction for incorrect according to the method can change the direction of change As shown
The basic use of 6.3 process A document, edit the original
Format: CAD file (format: DXF) / PCB files/picture BMP...
Text or graphics can directly use the text or graphics Artcam tools to edit
B, generating processing code
Setting and calculating tool path generation TAP files/NC... . Relevant software is introduced: Artcam wen tai carved with etc
C, clamping work-piece (for flatness requirement high processing such as PCB must use double-sided gum and benchmark plate fixation)
Note: the base plate can use PVC materials such as the acrylic, use double-sided gum paste on the platform, the size according to the needs, use the milling around 3mm
The milling plane
D, origin and knife
Will move to the origin of the workpiece tool, click Settings for the origin of the software
(manual speed adjustment shortcut \
Example: the origin of the workpiece in lower XY in the origin of the workpiece, Z surface
Through the keyboard manual control tool will move to the left, click on the software workpiece origin and Settings for dao (Z) will set tool and workpiece surface move,
www.fmuser.com
第 13 页 共 22 页
cutting time clicking Z reset
If need to adjust position after the sword, or highly through direct modification coordinates to compensate
Specific means is: left click on to modify the coordinates of the shaft and input coordinates, then press enter confirmation (im) under the condition for English, E, started processing 1, loading G code
2 and selection process documents
3、and coordinates zero
www.fmuser.com
第 14 页 共 22 页
4, reduce feed rate - 50% (F10) increase shortcuts to rate (shortcuts F11) 5 and click on \
6, after the operation in the machining process, adjust feeding rate according to actual processing documents and material and adjusting feed rate 0% ~ 100%
7 and machining process can point \
After the stop to continue processing, pay attention to the first open the spindle
8 and the use of suspended, in the machining process may at any time suspend processing, suspended after start operation can continue processing Chapter 7 of the note
1, processing automatically, spindle automatically shut off, but still in this device driver motor energized condition, so if long time not operate please close controller power or emergency stop
2 emergency, please press the emergency stop or shortcut \
Chapter 10: maintenance and maintenance
Engraving machine is computer control precision equipment, its processing movement is composed of precision mechanical movement mechanism, in order to ensure the normal use of carving machines, must often to carving machine maintenance and
concrete requirements are as follows:
1 the daily maintenance
Will be working site, keep clean the machine, water-cooled spindle each use
clean water before must check whether smooth.
Must often clean spindle chuck.
Timely liquidation silk pole on the rails and dirt, and the scraps to the wire
www.fmuser.com
第 15 页 共 22 页