DH系列
1.Check motor and gearbox what you want to combined 2.Check and remove any damages from motor and gearboxM DW P.C.D.A
3.Remove the caps from beside of gearbox,Loosen the couple of screws(A) from input shaft through the holes 4.Remove the keyway from output shaft of motor if it has 5.Fit the motor in the gearbox, and put it in block on table,gearbox
0.9
0.8
beneath the motor 6.Motor flange adjacent on gearbox input flange, and tighten the screws 7.Tighten the couple of screws(A) into the input shaft of gearbox the
P R MOTOR GEARDOX
torque of tight reference to table 2-1
17
马达出力端/减速机入力端60型入力轴轴长引导外径引导长度固定螺孔固定螺孔节径固定螺孔数量DW mm Nm S R B P M A mm mm mm mm mm mm 46~70 4 3 5 46~70 4 3 5 6.35~14≤30 30~50≤4
70型8~14≤30 30~60≤4.5
90
型11~24≤40≤7
120型 150型 180型14~28 22~42≤56≤5≤85≤10 24~55≤95≤10
50~80 55~110 95~130 95~150
任何尺寸70~100 70~145 115~145 115~145 4 5 11 4 6 16.5 4 8 40 4 8 40
板手规格锁紧扭力