注释COMMENT: 干净 CLEAN
静态电气检查STATIC ELECTRICAL CHECK: 合格 PASS 电气连线检查ELECTICAL HARNESS CHECK: 合格 PASS
目视检查VISUAL INSPECTIONS
接收时是否已经脱开DISCONNECTED AS RECEIVED: 没有 No
回油滤压差指示器是否弹起SCAVENGE DPI ACTUATED: 没有 No 注油滤压差指示器是否弹起CHARGE DPI ACTUATED: 不适用 N/A 热熔阀是否已经打开THEMAL VALVE ACTUATED: 不适用 N/A
磁性金属探测器状况MAGNETIC CHIP DETECTOR CONDITION:不适用NOT APPLICABLE 输入轴是否剪断INPUT SHAFT SHEARED: 没有 No 修理级别REPAIR LEVEL:Minor Repair 故障分析FAILURE ANALYSIS:
CONICAL SPRING ON CONTROL UNIT OF PUMP AND MOTOR ASSEMBLY WAS BROKEN WHICH CAUSED PMG OVER FREQUENCY. 泵马达组件上的控制装置中的锥形弹簧断裂导致永磁发电机超频。
主要故障PRIMARY FAILURE:
CONICAL SPRING ON CONTROL UNIT OF PUMP AND MOTOR ASSEMBLY WAS BROKEN WHICH CAUSED PMG OVER FREQUENCY.
其它故障情况SECONDARY FINDINGS:
INPUT SEAL: Input carbon seal was blistered on the sealing face; the input carbon seal was scrap. Sealing face on the input shaft was scratched, and was lapped. 输入轴碳封圈密封面产生浮泡；碳封圈报废。输入轴上的密封面划伤，研磨修复。