中国塑料标准(2)

分：总则 塑料拉伸性能的测定第2部Plastics - Determination of tensile properties - Part 2: 分：模塑和挤Test conditions for moulding and extrusion plastics 塑塑料的试验条件 塑料拉伸性能的测定第3部Plastics - Determination of tensile properties - Part 3: 分：薄膜和薄Test conditions for films and sheets 片的试验条件 塑料拉伸性能的测定第4部分：各向同性Plastics - Determination of tensile properties - Part 4: 和正交各向异Test conditions for isotropic and orthotropic 性纤维增强复fibre-reinforced plastic composites 合材料的试验条件 塑料拉伸性能的测定第5部Plastics - Determination of tensile properties - Part 5: 分：单向纤维Test conditions for unidirectional fibre-reinforced 增强复合材料plastic composites 的试验条件 塑料压缩性能Plastics - Detemination of compressive properties 的测定 塑料简支梁冲击性能的测定Plastics - Determination of charpy impact properties - 第1部分：非Part 1: Non - instrumented impact test 仪器化冲击试验 热塑性塑料管Thermoplastics pipes--Universal wall thickness table 材通用壁厚表 硬质泡沫塑料开孔和闭孔体Rigid cellular plastics - Determination of the volume 积百分率的测percentage of open cells and of closed cells 定 绝热用模塑聚Moulded polystyrene foam board for thermal 苯乙烯泡沫塑insulation GB/T 1040.2-2006 GB/T 1040.3-2006 GB/T 1040.4-2006 GB/T 1040.5-2008 GB/T 1041-2008 GB/T 1043.1-2008 GB/T 10798-2001 GB/T 10799-2008 GB/T 10801.1-2002 料 绝热用挤塑聚Rigid extruded polystyrene foam board for thermal GB/T 10801.2-2002 苯乙烯泡沫塑insulation (XPS) 料(XPS) 通用软质聚醚型聚氨酯泡沫General flexible polyether polyurethane cellular plastics 塑料 GB/T 10802-2006 塑料绝缘和橡皮绝缘电话软Plastic or rubber insulated telephone cords - Part 1: GB/T 11016.1-2009 线第1部分：General 一般规定 塑料绝缘和橡皮绝缘电话软Plastic or rubber insulated telephone cords - Part 2: GB/T 11016.2-2009 线第2部分：Polyvinyl chloride insulated telephone cords 聚氯乙烯绝缘电话软线 塑料绝缘和橡皮绝缘电话软Plastic or rubber insulated telephone cords - Part 3: GB/T 11016.3-2009 线第3部分：Polypropylene insulated telephone cords 聚丙烯绝缘电话软线 塑料绝缘和橡皮绝缘电话软Plastic or rubber insulated telephone cords - Part 4: GB/T 11016.4-2009 线第4部分：Rubber insulated telephone cords 橡皮绝缘电话软线 塑料蠕变性能Plastic - Determination of creep behaviour - Part 1: GB/T 11546.1-2008 的测定第1部Tensile creep 分：拉伸蠕变 塑料耐液体化Plastic - Methods of test for the determination of the 学试剂性能的effects of immersion in liquid chemicals 测定 硬质塑料板材耐冲击性能试Standard test method for impact resistance of rigid 验方法 (落锤plastic sheeting by means of a tup (falling weight) 法) 未增塑聚氯乙Test methods on mechanical and weathering properties GB/T 11547-2008 GB/T 11548-1989 GB/T 11793-2008 烯（PVC-U）塑for unplasticized polyvinyl chloride (PVC-U) doors and 料门窗力学性windows 能及耐候性试验方法 GB/T 11997-2008 塑料多用途试Plastic - Multipurpose test specimens 样 塑料玻璃化温Determination of glass transitiontemperature of 度测定方法热plastics--Thermomechanical analysis 机械分析法 塑料暴露于湿热、水喷雾和Determination of the effects of exposure to damp 盐雾中影响的heat，water spray and salt mist for plastics 测定 GB/T 11998-1989 GB/T 12000-2003 塑料未增塑聚氯乙烯模塑和Plastics - Unplasticized poly (vinyl chloride) (PVC-U) GB/T 12001.1-2008 挤出材料第1moulding and extruded materials - Part 1: Designation 部分：命名系system and basis for specifications 统和分类基础 塑料未增塑聚氯乙烯模塑和Plastics - Unplasticized poly (vinyl chloride) (PVC-U) GB/T 12001.2-2008 挤出材料第2moulding and extruded materials - Part 2: Preparation 部分：试样制of test specimens and determination of properties 备和性能测定 GB/T 12002-1989 塑料门窗用密Sealing strips for plastic doors and windows 封条 未增塑聚氯乙烯（PVC-U）塑Unplasticized polyvinyl chloride(PVC-U) windows - 料窗外形尺寸Determination of dimensions 的测定 GB/T 12003-2008 塑料聚酰胺第Plastics - Polyamides - Part 1: Determination of viscosity GB/T 12006.1-2009 1部分：黏数测number 定 塑料聚酰胺第Plastics - Polyamides - Part 2: Determination of water GB/T 12006.2-2009 2部分：含水量content 测定 GB/T 12008.1-2009 塑料聚醚多元Plastics - Polyether polyols - Part 1: Designation system 醇第1部分：命名系统 塑料聚醚多元Plastics - Polyether polyols - Part 3: Determination of GB/T 12008.3-2009 醇第3部分：hydroxyl number 羟值的测定 塑料聚醚多元Plastics - Polyether polyols - Part 4: Determination of GB/T 12008.4-2009 醇第4部分：sodium and potassium 钠和钾的测定 塑料多亚甲基多苯基异氰酸Plastics - Polymethylene polyphenyl isocyanate - Part 3: GB/T 12009.3-2009 酯第3部分：Determination of viscosity 黏度的测定 塑料 聚乙烯醇材料（PVAL）Plastics - Poly(vinyl alcohol)(PVAL) materials - Part 1: GB/T 12010.1-2008 第1部分：命Designation system and basis for specifications 名系统和分类基础 塑料薄膜和薄Plastics--Film and sheeting--Determination 片加热尺寸变dimensional change on heating 化率试验方法 塑料注射模技Specifiication of injection moulds for plastics 术条件 塑料注射模模Injection mould bases for plastics 架 塑料注射模模Specification of injection mould bases for plastics 架技术条件 橡胶或塑料涂Rubber or plastics coated fabrics - Low-temperature 覆织物低温冲impact test 击试验 橡胶或塑料涂Rubber or plastics-coated fabrics--Determination of 覆织物耐屈挠resistance to damage by flexing 破坏性的测定 橡胶或塑料涂Rubber or plastics-coated fabrics--Determination of 覆织物抗压裂crush resistance 性的测定 塑料涂覆织物Plastics coated fabrics--Polyvinyl chloride of GB/T 12027-2004 GB/T 12554-2006 GB/T 12555-2006 GB/T 12556-2006 GB/T 12584-2008 GB/T 12586-2003 GB/T 12587-2003 GB/T 12588-2003 聚氯乙烯涂覆coatings--Rapid method for checking fusion 层融合程度快速检验法 金属覆盖层塑Metallic coatings Electroplated coatings of nickel plus 料上镍+铬电chromium on plastics materials 镀层 橡胶和塑料软管组合件液压Rubber and plastics hose assemblies - Flexing combined 脉冲曲挠试验with hydraulic impulse test（half-omega test） （半Ω试验） 橡胶塑料机械Editorial nominating method for the modeldesignation 产品型号编制of rubber and plastics machinery 方法 橡胶塑料加压Dispersion mixer for rubber and plastics 式捏炼机 硬质泡沫塑料Test method for average cell size of rigid cellular 平均泡孔尺寸plastics 试验方法 硬质泡沫塑料Rigid cellular plastics - Determination of friability 易碎性的测定 橡胶和塑料撕Rubber and plastics - Analysis of multipeak traces 裂强度和粘合obtained in determinations of tear strength and 强度测定中的adhesion strength 多峰曲线分析 滑动轴承覆有减摩塑料层的Plain bearings--Bimetallic busheswith plastic overlay 双金属轴套 拉挤玻璃纤维增强塑料杆力Test method for mechanical properties of pultruded 学性能试验方glass fiber reinforced plastic rods 法 塑料闪烁体 Plastic scintillators GB/T 12600-2005 GB/T 12722-2008 GB/T 12783-2000 GB/T 12784-1991 GB/T 12811-1991 GB/T 12812-2006 GB/T 12833-2006 GB/T 12949-1991 GB/T 13096-2008 GB/T 13376-2008 GB/T 13455-1992 GB/T 13525-1992 moulding 氨基模塑料挥Plastics--Aminoplastic 发物测定方法 materials--Determination of volatile matter 塑料拉伸冲击Test method for tensile-impact property of plastics