中国塑料标准(4)

GB/T 1630.1-2008 塑料环氧树脂第1部分：命Plastics - Epoxy resins - Part 1: Designation 名 塑料使用毛细管粘度计测定Plastics - Determination of the viscosity of polymers in 聚合物稀溶液dilute solution using capillary viscometers - 粘度第1部分：Part1:General principles 通则 塑料使用毛细管粘度计测定聚合物稀溶液粘度第5部分：热塑性均聚和共聚型聚酯(TP) GB/T 1632.1-2008 GB/T 1632.5-2008 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : Thermoplastic polyester(TP) homopolymers and copolymers GB/T 1633-2000 热塑性塑料维Plastics--Thermoplastic materials--Determination of 卡软化温度Vicat softening temperature(VST) (VST)的测定 塑料负荷变形温度的测定第Plastics--Determination of temperature of deflection 1部分:通用试under load--Part 1:General test method 验方法 塑料负荷变形温度的测定第Plastics--Determination of temperature of deflection 2部分:塑料、under load--Part 2:Plastics，ebonite and 硬橡胶和长纤long-fibre-reinforced composites 维增强复合材料 塑料负荷变形温度的测定第Plastics--Determination of temperature of deflection 3部分:高强度under load--Part 3:High-strength thermosetting 热固性层压材laminates 料 塑料能从规定漏斗流出的材Plastics - Determination of apparent density material 料表观密度的that can be poured from a specified funnel 测定 GB/T 1634.1-2004 GB/T 1634.2-2004 GB/T 1634.3-2004 GB/T 1636-2008 GB/T 16422.1-2006 塑料实验室光Plastics - Methods of the exposure to laboratory light 源暴露试验方sources - Part 1: General guidance 法第1部分：总则 塑料实验室光源暴露试验方Plastics--Methods of exposure to laboratory light GB/T 16422.2-1999 法第2部分:氙sources--Part 2:Xenon-arc sources 弧灯 塑料实验室光源曝露试验方Plastics--Methods of exposure to laboratory light GB/T 16422.3-1997 法第3部分:荧sources--Part 3:Fluorescent UV lamps 光紫外灯 塑料实验室光源曝露试验方Plastics--Methodsof exposure to laboratory light GB/T 16422.4-1996 法第4部分:开sources--Part 4:Open flame carbon arc lamp 放式碳弧灯 塑料有引线片Specification of leadframes for plastic leaded chip 式载体封装引carrier packages 线框架规范 GB/T 16525-1996 塑料薄膜和薄片 耐撕裂性Plastics - Film and sheeting - Determination of tear GB/T 16578.1-2008 能的测定第1resistance - Part 1：Trouser tear method 部分: 裤形撕裂法 塑料薄膜和薄片耐撕裂性能的测定第2部Plastics - Film and sheeting - Determination of tear GB/T 16578.2-2009 分：埃莱门多resistance - Part 2: Elmendorf method 夫（Elmendor）法 塑料 用毛细管法和偏光显微镜法测定部分结晶聚合物熔融行为（熔融温度或熔融范围） GB/T 16582-2008 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods GB/T 16613-2008 塑料试验用聚Plastics - Preparation of PVC pastes for test purposes - 氯乙烯（PVC）Dissolver method 糊的制备分散器法 纤维增强塑料General procedure of failure analysis for fiber 结构件失效分reinforced plastic structural products 析一般程序 纤维增强塑料层合板拉-拉疲Test method for tension-tension fatigue of fiber 劳性能试验方reinforced plastic laminates 法 GB/T 16778-2009 GB/T 16779-2008 热塑性塑料材料注塑试样的Injection moulding of test specimens of thermoplastic 制备第1部分:GB/T 17037.1-1997 materials--Part 1:General principles and moulding of 一般原理及多multipurpose and bar test specimens 用途试样和长条试样的制备 塑料热塑性塑料材料注塑试Plastics--Injection moulding of test specimens of GB/T 17037.3-2003 样的制备第3thermoplastic materials--Part 3: Small plates 部分: 小方试片 塑料热塑性塑料材料注塑试Plastic--Injection moulding of test specimens of GB/T 17037.4-2003 样的制备第4thermoplastic materials--Part 4: Determination of 部分: 模塑收moulding shrinkage 缩率的测定 橡胶塑料拉力、压力和弯Technical specification for tensile, compression and 曲试验机（恒flexural testing machines for rubber and plastics 速驱动）技术(constant rate of rtaverse) 规范 色漆、清漆和Paints,varnishes and plastics - Determination of 塑料不挥发物non-volatile-matter content 含量的测定 光解性塑料户Method for outdoor 外暴露试验方photodegradable plastics 法 exposure testing of GB/T 17200-2008 GB/T 1725-2007 GB/T 17603-1998 GB/T 17689-2008 土工合成材料Geosynthetics - Plastic geogrids 塑料土工格栅 土工合成材料塑料扁丝编织Geosynthetics--Plastic woven film yarn geotextile 土工布 GB/T 17690-1999 包装术语工业包装袋热塑性Packaging--Sacks--Vocabulary and types--Sacks made GB/T 17858.2-1999 塑料软质薄膜from thermoplastic flexible film 袋 GB/T 17876-1999 包装容器塑料Packaging volume--Plastic pilferproof closure 防盗瓶盖 声学1～10 MHz频率范围Acoustics--Methods for measuring the longitudinal 内橡胶和塑料sound speed and attenuation coefficient of rubbers and 纵波声速与衰plastics in the frequency range 1 MHz to 10 MHz 减系数的测量方法 热塑性塑料管材蠕变比率的Thermoplastics pipes--Determination of creep ratio 试验方法 塑料管道系统用外推法确定Plastics piping and ducting systems - Determination of 热塑性塑料材the long - term hydrostatic strength of thermoplastics 料以管材形式materials in pipe form by extrapolation 的长期静液压强度 塑料聚乙烯环Plastics - Test method for environmental stress-cracking 境应力开裂试of polyethylene 验方法 橡胶和塑料软and plastics hoses andhose 管及软管组合Rubber 件透气性的测assemblies--Determination of permeability to gas 定 橡胶和塑料软Rubber and plastics hoses and tubing--Determination 管及非增强软of transmission of liquids through hose and tubing 管液体壁透性walls 测定 橡胶和塑料软Rubber and plastics hoses--Exposure to a xenon arc GB/T 18022-2000 GB/T 18042-2000 GB/T 18252-2008 GB/T 1842-2008 GB/T 18422-2001 GB/T 18423-2001 GB/T 18424-2001 管氙弧灯曝晒lamp--Determination 颜色和外观变andappearance 化的测定 of changes in colour GB/T 18426-2001 橡胶或塑料涂Rubber or plastics-coated fabrics--Low-temperature 覆织物低温弯bend test 曲试验 塑料 悬臂梁冲击强度的测Plastics - Determination of izod impact strength 定 塑料符号和缩略语第1部分: Plastics - Symbols and abbreviated terms - Part 1: Basic 基础聚合物及polymers and their special characteristics 其特征性能 塑料 符号和缩略语第2部Plastic-Symbols and abbreviated-Part 2: Fillers and 分：填充及增reinforcing materials 强材料 塑料符号和缩Plastics - Symbols and abbrebiated terms - Part 3: 略语第3部分：Plasticizers 增塑剂 塑料符号和缩Plastics - Symbols and abbreviated terms - Part 4: 略语第4部分: Flame retardants 阻燃剂 塑料聚乙烯 (PE) 模塑和挤Plastics―Polyethylene(PE) moulding and extrusion 出材料第2部materials―Part 2: Preparation of test specimens and 分: 试样制备determination of properties 和性能测定 热塑性塑料压力管材和管件Thermoplastics materials for pipes and fittings for applications classification and 用材料分级和pressure 命名总体使用designation--Overall service(design) coefficient (设计)系数 农业灌溉设备Agricultural irrigation equipment－ Manually operated 小型手动塑料small plastics valves 阀 流体输送用热Thermoplastics pipes for the transport of GB/T 1843-2008 GB/T 1844.1-2008 GB/T 1844.2-2008 GB/T 1844.3-2008 GB/T 1844.4-2008 GB/T 1845.2-2006 GB/T 18475-2001 GB/T 18689-2009 GB/T 18743-2002