中国塑料标准(5)

塑性塑料管材fluids--Determination of impact by the charpy method 简支梁冲击试验方法 土工合成材料Geosynthetics--Plastic three dimensional erosion 塑料三维土工control mat 网垫 多孔橡胶与塑Cellular rubbers and plastics - Determination of 料动态缓冲性dynamic cushioning performance 能测定 橡胶和塑料软管动态条件下Rubber and plastics hoses--Assessment of ozone 耐臭氧性能的resistance under dynamic conditions 评定 橡胶和塑料软Rubber and plastics hoses--Determination 管静态下耐紫ultra-violet resistance under static conditions 外线性能测定 of GB/T 18744-2002 GB/T 18943-2008 GB/T 18949-2003 GB/T 18950-2003 塑料抗冲击聚苯乙烯(PS-I)模Plastics － Impact-resistant Polystyrene (PS-I) 塑和挤出材料GB/T 18964.1-2008 moulding and extrusion materials －Part 1: 第1部分：命Designation system and basis for specifications 名系统和分类基础 塑料抗冲击聚苯乙烯(PS-I)模Plastics--Impact-resistant polystyrene(PS-I) moulding 塑和挤出材料GB/T 18964.2-2003 and extrusion materials--Part 2: Preparation of test 第2部分: 试specimens and determination of properties 样制备和性能测定 冷热水系统用Thermoplastics pipes and fittings forhot and cold water 热塑性塑料管systems 材和管件 橡胶或塑料涂覆织物耐磨性Rubber-or plastics-coated fabrics--Determination of 的测定马丁代abrasion resistance--Martindale method 尔法 土工合成材料Geosynthetics--Plastic geocell 塑料土工格室 GB/T 18991-2003 GB/T 19089-2003 GB/T 19274-2003 GB/T 19278-2003 热塑性塑料管材、管件及阀General terms and their definitions of thermoplastic 门通用术语及pipes，fittings and valves 其定义 流体输送用热塑性塑料管材耐快速裂纹扩展(RCP)的测定小尺寸稳态试验(S4试验) GB/T 19280-2003 Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) 小艇艇体结构和构件尺寸第1部分:材料:热Small craft--Hull construction and scantlings--Part 1: GB/T 19314.1-2003 固性树脂、玻Materials: Thermosetting resins，glass-fibre 璃纤维增强塑reinforcement，reference laminate 料、基准层合板 塑料差示扫描Plastics--Differential scanning calorimetry(DSC)--Part GB/T 19466.1-2004 量热法(DSC)第1:General principles 1部分:通则 塑料差示扫描量热法(DSC)第Plastics--Differential scanning calorimetry(DSC)--Part GB/T 19466.2-2004 2部分:玻璃化2:Determination of glass transition temperature 转变温度的测定 塑料差示扫描量热法(DSC)第Plastics--Differential scanning calorimetry(DSC)--Part GB/T 19466.3-2004 3部分:熔融和3:Determination of temperatureand enthalpy of 结晶温度及热melting and crystallization 焓的测定 塑料差示扫描量热法（DSC）第6部分：氧GB/T 19466.6-2009 化诱导时间(等温OIT)和氧化诱导温度（动态OIT）的测定 GB/T 19467.1-2004 Plastics - Differential scanning calorimetry（DSC）- Part 6: Determination of oxidation induction time（isothermal OIT）and oxidation induction temperature（dynamic OIT） 塑料可比单点Plastics--Acquisition and presentation of comparable 数据的获得和single-point data--Part 1:Moulding materials 表示第1部分:模塑材料 塑料可比单点数据的获得和Plastics--Acquisition and presentation of comparable GB/T 19467.2-2004 表示第2部分:single-point data--Part 2:Long-fibre-reinforced plastics 长纤维增强材料 GB/T 19470-2004 土工合成材料Geosythetics--Plastic geonet 塑料土工网 塑料管道系统硬聚氯乙烯(PVC-U)管材弹GB/T 19471.1-2004 性密封圈式承口接头偏角密封试验方法 塑料管道系统硬聚氯乙烯(PVC-U)管材弹GB/T 19471.2-2004 性密封圈式承口接头负压密封试验方法 GB/T 19532-2004 Plastics piping systems--Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes--Test method forleaktighness under internal pressure and angular deflection Plastics piping systems--Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes--Test method for leaktightness under negative pressure 包装材料气相Packaging material--Volatile corrosion inhibiting film 防锈塑料薄膜 塑料无滴薄膜Test method for drop-proof properties ofdrop-proof 无滴性能试验plastic films 方法 农田排水用塑Single wall corrugated plastics pipes for agricultural 料单壁波纹管 drainage 闭孔塑料长期Determination of the long-term change in thermal 热阻变化的测resistance of closed-cell plastics(accelerated laboratory 定实验室加速test methods) 测试方法 GB/T 19603-2004 GB/T 19647-2005 GB/T 19687-2005 外科植入物超高分子量聚乙Implants for surgery Ultra-high molecular weight GB/T 19701.2-2005 烯第2部分:模polyethylene-part 2:Moulded forms 塑料 GB/T 19712-2005 塑料管材和管Plastics pipes and fittingsPolyethylene(PE) tapping tees 件聚乙烯(PE)Test method for impact resistance 鞍形旁通抗冲击试验方法 包装材料塑料Packaging Material Standard Test Method for Oxygen 薄膜和薄片氧Gas Permeability Characteristics of Plastic Film and 气透过性试验Sheeting Using a Coulometric Sensor 库仑计检测法 农业灌溉设备Agricultural irrigation equipment-Plastics saddles for 聚乙烯承压管polyethylene pressure pipes 用塑料鞍座 塑料管材和管件聚乙烯电熔Plastics pipes and fittings Crushing decohesion test for 组件的挤压剥polyethylene(PE)electrofusion assemblies 离试验 塑料管材和管Plastics pipes and fittings Preparation of test piece 件聚乙烯管材assemblies between a polyethylene(PE)pipe and an 和电熔管件组electrofusion fitting 合试件的制备 塑料管材和管件公称外径大Plastics pipes and fittings Peel decohesion test for 于或等于polyethylene(PE)electrofusion assemblies of nominal 90mm的聚乙outside diameter greater than or equal to 90 mm 烯电熔组件的拉伸剥离试验 塑料管材和管件聚乙烯(PE)Plastics pipes and fittings-Preparation of 管材/管材或polyethylene(PE)pipe/pipe or pipe/fitting test piece 管材/管件热assemblies by butt fusion 熔对接组件的制备 在定义堆肥化Plastics-Determination of the degree of disintegration 中试条件下塑of plastic materials under defined composting 料材料崩解程conditions in a pilot-scale test 度的测定 GB/T 19789-2005 GB/T 19796-2005 GB/T 19806-2005 GB/T 19807-2005 GB/T 19808-2005 GB/T 19809-2005 GB/T 19811-2005 塑料节水灌溉Plastic equipment for water saving irrigation-drip tape GB/T 19812.1-2005 器材单翼迷宫with labyrinth on one side 式滴灌带 塑料节水灌溉器材压力补偿Plastic equipment for water saving irrigation-Pressure GB/T 19812.2-2005 式滴头及滴灌compensating emitter and emitting pipe 管 塑料节水灌溉Plastic equipment for water saving irrigation - Drip pipe GB/T 19812.3-2008 器材内镶式滴and tape inlaid with emitters inside 灌管、带 冷热水用热塑性塑料管道系Thermoplastics piping systems for hot and cold water 统管材管件组supply-Test method for the resiance of pipes and 合系统热循环fittings mounted assemblies to thermal cycling 试验方法 塑料氯乙烯均聚和共聚树脂Plastics -- Homopolymer and Copolymer resins of vinyl 表观密度的测chloride Determination of apparent density 定 无气喷涂用橡胶和/或塑料Rubber and/or plastics hoses and hoses assemblies for 软管及软管组airless paint spraying 合件 内燃机用橡胶Rubber and Plastics hoses for fuels for 和塑料燃油软internal-combustion engines -- Method of test for 管可燃性试验flammability 方法 GB/T 19993-2005 GB/T 20022-2005 GB/T 20023-2005 GB/T 20024-2005 汽车空调用橡胶和塑料软管Rubber and plastics hoses and hose assemblise for GB/T 20025.2-2005 及软管组合件automotive air conditioning -- Refrigerant 134a 耐制冷剂134a 橡胶和塑料软Rubber and plastics hose -- Determination of abrasion 管内衬层耐磨of lining 性测定 橡胶或塑料涂Rubber-or plastics-coated fabrics -- Determiation of 覆织物破裂强bursting strength 度的测定 降解塑料的定Define, classify, marking and degradability requirement 义、分类、标of degradable plastic 识和降解性能GB/T 20026-2005 GB/T 20027-2005 GB/T 20197-2006