免费素材 http://www.58pic.com xs1
Now, we are going to give thepaint that wet look. To start, create a New Layer called Highlights 1″ andmake this a clipping layer (use Alt + Click on the Layers Panel).
现在，我们要给油漆湿感，新建一个名为Highlights 1 图层，制作一个剪切层(在图层板上使用Alt+单击 ) Step 16
Now, draw in some white highlights as shown. Set this layer’sopacity to 11%
(现在如图所示，绘制一些白色的高光，设置这个图层的不透明度为11%。) Step 17
Open the layer’s Layer Styles and adjust the Blend If: UnderlyingLayer sliders as shown
(打开这个图层的图层样式，调节混合颜色带滑标如图所示. ) Step 18
Next, we are going to do thesame with a darker color. Create a new clipping layer called Lowlights anduse a darker red to paint in some lowlights.
(接下来，我们将做同样一个较深的颜色。新建一个名为Lowlights的剪切层，并使用暗红色涂刷在这些Lowlights上。) Step 19
Set the Lowlights layer’sopacity to 72% and open the Layer
免费素材 http://www.58pic.com xs1
Styles to adjust the Blend If sliders asshown.
(设置Lowlights图层不透明度为72%，打开这个图层的图层样式，调节混合颜色带滑标如图所示.) Step 20
We can keep using thistechnique of adding highlights and adjusting its Blend If sliders to completethe ‘wet’ look of paint (I used this technique to add 3 more highlights).(我们可以用同样的手法添加highlights，调节它的混合颜色带滑标来完成油漆的湿感(我用这个方法添加了3个以上的highlights.) Step 21
Now that the bristles and paintare done, we can create the rest of the brush. Hide all layers associated withthe paint and bristles. Next, create a New Group called Handle. Inside thatgroup, create 2 new groups called Metal and Grip.
(现在刷毛和油漆已经完成，我们可以创建毛刷的其他部分。隐藏所有有关刷子和刷毛的图层。接下来，新建一个组名为Handle。在这个组里，新建2个组，分别命名为Metaland Grip.) Step 22
In the Metal group, create aNew Layer called Metal Band. Using the sketch as a guide, create the shape ofthe metal band that holds the bristles in place. I found it easier to createthe brush’s handle upright. It may help to go back to the sketch and create acopy to rotate it
免费素材 http://www.58pic.com xs1
so that the brush is standing up.
(在Metal组里，新建一个图层名为Metal Band。以草图为参考，创建能包住刷毛的金属带。我觉得创建一个垂直的刷柄很容易。它可以幫助回到草圖，並創建一個副本，旋轉，這樣的刷子就能竖起来。) Step 23
Create a New Layer called Bevels and draw in some bevels. You can usethe Pen Tool if you wish, but I just used the Brush Tool.
(新建一个图层命名为Bevels,画一个一样的斜面。如果你愿意，你可以使用钢笔工具，但是我就用了画笔工具.) Step 24
Use the Bevels layer to makea selection (Command/Ctrl + Click the thumbnail). Use this selection to Cut(Command/Ctrl + X) the Metal Band layer. Also cut out some holes for rivets.All of these cuts will give us more edges for the Bevel and Emboss effect inthe next step.
(使用Bevels图层作一个选项(Ctrl +点击缩略图)。使用此选项來剪切(/按Ctrl+X)的Metal Band 图层。也削減了一些鉚釘孔。在下一个步骤中，我們將給予所有這些切图更多的邊的斜面和浮雕效果) Step 25
Add the following Layer Stylesto the Metal Band layer 给Metal Band图层添加下面的图层样式， Next, add the following layerstyles to the Bevels layer.
免费素材 http://www.58pic.com xs1
接下来，给Bevels图层增加下面如图所示的图层样式， The result should resemble theimage below ( 结果图像应该是类似下面如图所示的效果.) Step 26
Next, create a New Layer calledRivets. Add a small circle at each opening on the metal band and add thefollowing layer styles.
Rivets.。(接下来，新建一个图层名为Rivets.在每个开口的金属带上增加一个小圆圈，并添加下面如图所示的图层样式。) The image should resemble thefollowing 图像应该是类似下面如图所示. Step 27
Now, to make the next few steps easier, merge the Rivets andBevel layers together. Next, merge the layer styles to the Metal Bandlayer. (现在，接下来的几个步骤容易些，合并Rivet和Bevel图层到一起。接着，合并Metal Band图层)。 Step 28
Create a New Layer called Reflections and make this a clipping layerto the Metal Band layer. Use a dark color to draw in several lines to createthe illusion of a reflection.
新建一个图层名为Reflections,并做个剪切图层到Metal Band图层.用深色画几条线，创造出一种映像效果。
免费素材 http://www.58pic.com xs1
Step 29
Create another clipping layer called Highlights 1. Using a lightercolor, draw in some highlights as shown. Use the Burn Tool to give the colorsome variation and the Blur Tool to soften some of the highlights. (建一个名为Highlight 1.的剪切层，用较淡的颜色，画一些亮点，如图所示。用加深工具使一些颜色变化，用模糊工具使一些亮点柔和。) Step 30
Create another clipping layer called Highlights 2″ and using thesame techniques from the previous step, add some additional highlights.
(建一个名为Highlight 2.的剪切层，与之前的步骤一样，用同样的手法添加一些额外的亮点。)
Your image should resemble the following 你的图像应该是类似下面如图所示. Step 31
Now that we’ve added reflections and highlights as clipping layersto the Metal Band layer, we will use the same techniques to add reflectionsand highlights to the bevels. After this is done, add any additional details asyou see fit.
(现在我们已经添加了一些映像和亮点在Metal Band内的剪切层上 ，我们将用同样的方法在斜面Bevels上添加一些映像和亮点。这个做完以后，你可以增加一些你认为合适的额外细节。)