0xB3,0xFF,0xB6,0x03,0xB6,0xFB,0xB6,0xFB,0x86,0xFB,0xB6,0xFB,0xFE,0x03,0xFE,0xFB}, //;-- 阳 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xFF,0xFF,0x83,0xFF,0xBA,0x03,0xB6,0xFB,0xB6,0xFB,0xAE,0xFB,0xB6,0xFB,0xB6,0xFB,
0xBA,0x03,0xBA,0xFB,0xBA,0xFB,0x96,0xFB,0xAE,0xFB,0xBE,0xFB,0xBE,0x03,0xBE,0xFB},
//;-- 董 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xF7,0xDF,0x00,0x01,0xF7,0xDF,0xE0,0x0F,0xFE,0xFF,0x80,0x03,0xFE,0xFF,0xE0,0x0F, 0xEE,0xEF,0xE0,0x0F,0xEE,0xEF,0xE0,0x0F,0xFE,0xFF,0xC0,0x07,0xFE,0xFF,0x00,0x01}, //;-- 君 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xFF,0xFF,0xC0,0x07,0xFB,0xF7,0xFB,0xF7,0x00,0x01,0xFB,0xF7,0xFB,0xF7,0xC0,0x07, 0xF7,0xFF,0xF7,0xFF,0xE0,0x07,0xE7,0xF7,0xD7,0xF7,0xB7,0xF7,0x70,0x07,0xF7,0xF7}, //;-- 瑀 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xFF,0xFB,0xFF,0xE1,0x04,0x1F,0xDF,0xDF,0xDE,0x03,0xDE,0xDB,0xDE,0xDB,0x06,0x03,
0xDF,0xDF,0xDC,0x01,0xDD,0xDD,0xC5,0xD5,0x1D,0x05,0xBD,0xFD,0xFD,0xF5,0xFD,0xFB},
//;-- 任 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xF7,0xEF,0xF7,0x87,0xF4,0x3F,0xEF,0xBF,0xEF,0xBF,0xCF,0xBF,0xCF,0xBF,0xA0,0x01, 0x6F,0xBF,0xEF,0xBF,0xEF,0xBF,0xEF,0xBF,0xEF,0xBF,0xEF,0xBF,0xE8,0x03,0xEF,0xFF}, //;-- 柄 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xEF,0xFF,0xEC,0x01,0xEF,0xDF,0xEF,0xDF,0x03,0xDF,0xEC,0x01,0xCD,0xDD,0xC5,0xDD,
34
0xA9,0xAD,0xAD,0xB5,0x6D,0x75,0xEC,0xFD,0xED,0xFD,0xED,0xFD,0xED,0xF5,0xED,0xFB},
//;-- 坤 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xEF,0xDF,0xEF,0xDF,0xEF,0xDF,0xEE,0x03,0xEE,0xDB,0x02,0xDB,0xEE,0xDB,0xEE,0x03,
0xEE,0xDB,0xEE,0xDB,0xEE,0xDB,0xE2,0x03,0x1E,0xDB,0xBF,0xDF,0xFF,0xDF,0xFF,0xDF},
//;-- 马 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xFF,0xFF,0x80,0x1F,0xFF,0xDF,0xFF,0xDF,0xEF,0xDF,0xEF,0xDF,0xEF,0xDF,0xE0,0x03, 0xFF,0xFB,0xFF,0xFB,0xFF,0xFB,0x00,0x1B,0xFF,0xFB,0xFF,0xFB,0xFF,0xD7,0xFF,0xEF}, //;-- 金 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xFE,0xFF,0xFE,0xFF,0xFD,0x7F,0xFB,0xBF,0xF7,0xDF,0xEF,0xEF,0xD0,0x17,0x3E,0xF9, 0xFE,0xFF,0xC0,0x07,0xFE,0xFF,0xEE,0xEF,0xF6,0xEF,0xF6,0xDF,0x00,0x01,0xFF,0xFF}, //;-- 龙 -- ** 宋体, 12 **
//; 当前所选字体下一个汉字对应的点阵为: 宽度x高度=16x16, 调整后为: 16x16 {0xFB,0xDF,0xFB,0xEF,0xFB,0xEF,0xFB,0xFF,0x00,0x01,0xFB,0x7F,0xFB,0x77,0xFB,0x77, 0xFB,0x6F,0xF7,0x5F,0xF7,0x3F,0xEF,0x7D,0xEE,0x7D,0xDD,0x7D,0xBB,0x81,0x7F,0xFF} };
register unsigned char i,j,k,l;
SCON = 0x00; //串口工作模式0：移位寄存器方式 TMOD = 0x01; //定时器T0工作方式1：16位方式 TR0 = 1; //启动定时器T0
P1 = 0x3f; //P1端口初值：允许接收、锁存、显示
35
IE = 0x82; //允许定时器T0中断 while (1) {
delay(2000); //延时1秒
for (i=0;i<32;i++) //显示效果：卷帘出┓ {
dispram[i] = Bmp[11][i]; if (i%2) delay(100);
} //━━━━━━━━┛ delay(1000);
for (i=0; i<12; i++) //显示效果：左跑马┓ {
for (j=0; j<2; j++) for (k=1; k<9; k++) {
for (l=0; l<16; l++) {
dispram[l*BLKN] = dispram[l*BLKN]<<1 | dispram[l*BLKN+1]>>7; dispram[l*BLKN+1] = dispram[l*BLKN+1]<<1 | Bmp[i][l*BLKN+j]>>(8-k); } delay(100);
}//end (k=0; k<16; k++)
}//end for (i=0; i<; i++)//━━━━━━━┛
delay(2000);
for (i=0; i<12; i++) //显示效果：上滚屏┓ {
36
for (j=0; j<16; j++) {
for (k=0; k<15; k++) {
dispram[k*BLKN] = dispram[(k+1)*BLKN]; dispram[k*BLKN+1] = dispram[(k+1)*BLKN+1]; }
dispram[30] = Bmp[i][j*BLKN]; dispram[31] = Bmp[i][j*BLKN+1]; delay(100); }
} //━━━━━━━━┛
delay(3000);
for (i=0;i<32;i++) //显示效果：卷帘入┓ {
dispram[i] = 0x00; if (i%2) delay(100);
} //━━━━━━━━┛ }//end while (1) }
/*延时函数*/
void delay(unsigned int dt) {
register unsigned char bt;
37
for (; dt; dt--)
for (bt=0; bt<255; bt++); }
/*显示屏扫描（定时器T0中断）函数*/ void leddisplay(void) interrupt 1 using 1 {
register unsigned char i, j=BLKN;
TH0 = 0xF8; //设定显示屏刷新率每秒62.5帧 TL0 = 0x30;
i = P1; //读取当前显示的行号 i = ++i & 0x0f; //行号加1，屏蔽高4位 do { j--;
SBUF = dispram[i*BLKN + j]; //送显示数据 while (!TI); TI = 0;
}while (j); //完成一行数据的发送 G = 1; //消隐（关闭显示） P1 &= 0xf0; //行号端口清○
RCLK = 1; //显示数据打入输出锁存器 P1 |= i; //写入行号 RCLK = 0; //锁存显示数据 G = 0; //打开显示 }
38